This patch enlarges OST_MAXREQSIZE so as to make the
request size large enough for 4MB RPC.
Signed-off-by: Li Xi <lixi@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4755
Reviewed-on: http://review.whamcloud.com/9599
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ll_prep_md_op_data() fails, ll_statahead_thread() does not
release reference of sai and parent dentry. It does not wake
up parent thread either. This patch fixes these problems.
Signed-off-by: Li Xi <lixi@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5274
Reviewed-on: http://review.whamcloud.com/10940
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just random misc stuff that Sean/Sumit&Archit picked up while I relaxed.
Well except for one commit:
* tag 'topic/drm-misc-2016-09-19' of git://anongit.freedesktop.org/drm-intel:
drm: Only use compat ioctl for addfb2 on X86/IA64
drm/qxl: squash lines for simple wrapper functions
drm/bridge: analogix_dp: squash lines for simple wrapper functions
drm/radeon: squash lines for simple wrapper functions
drm/amdgpu: squash lines for simple wrapper functions
dma-buf/sync-file: Avoid enable fence signaling if poll(.timeout=0)
drm/fence: allow fence waiting to be interrupted by userspace
drm: Move property validation to a helper, v2.
drm/bridge: adv7511: add support for the 2nd chip
When we get an unexpected Block Ack Request frame, the BAID from
the hardware will be invalid, and we'll pass it to mac80211 for
further handling (sending a delBA action frame.)
Add a comment explaining that, in case anyone looks in the future.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Due to firmware design considerations, move to wide ID for
all commands.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There's no point in making this an out-of-line function
since it just calls a single other function with a few
changed parameters.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Log group as well. Remove 0x prefix to match TX logging.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This will be used by more than MVM, so move it to iwlwifi
While at it, rename WRD_METHOD to the more appropriate
WRDD_METHOD and add some documentation.
Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
For automatic testing packet injection can be useful.
Support injection through debugfs.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Implement support for RRM by adding an option to configure the scan
dwell time and reporting scan start time and BSS detection time, and
Advertise support for these features.
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
On default queue we will not receive frame release notification,
but the BAR itself.
Upon receiving the BAR driver should look at the NSSN and adjust
window accordingly.
Fixes: b915c10174 ("iwlwifi: mvm: add reorder buffer per queue")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
There was recently a Full AP mode feature added where hostap adds
the station at auth stage, and not assoc.
However, when running with legacy hostapd, we get the auth response
before station was added, and tx_skb_non_sta fails to allocate
a queue, resulting in a complete failure of association.
Take care of this situation as well.
Add a warning when no valid queue is returned at all and make mvm
drop the packet instead of passing it on.
Refactor the function a bit while at it.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In 9000 family products we added an option to let the OEM fuse the
mac address via registers. If these registers are zeroed we use the OTP
address instead. Make sure that the address provided by the OEM is valid
and, if not, fall back to the OTP address as well.
Fixes: commit 17c867bfe8 ("iwlwifi: add support for getting HW address from CSR")
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This patch implements image conversion support using the IC tasks, with
tiling to support scaling to and from images up to 4096x4096. Image
rotation is also supported. Image conversion requests are added to
a run queue under the IC tasks.
The internal API is subsystem agnostic (no V4L2 dependency except
for the use of V4L2 fourcc pixel formats).
Callers prepare for image conversion by calling
ipu_image_convert_prepare(), which initializes the parameters of
the conversion. The caller passes in the ipu and IC task to use for
the conversion, the input and output image formats, a rotation mode,
and a completion callback and completion context pointer:
struct ipu_image_converter_ctx *
ipu_image_convert_prepare(struct ipu_soc *ipu, enum ipu_ic_task ic_task,
struct ipu_image *in, struct ipu_image *out,
enum ipu_rotate_mode rot_mode,
ipu_image_converter_cb_t complete,
void *complete_context);
A new conversion context is created that is added to an IC task
context queue. The caller is given the new conversion context,
which can then be passed to the further APIs:
int ipu_image_convert_queue(struct ipu_image_converter_run *run);
This queues the given image conversion request run to a run queue,
and starts the conversion immediately if the run queue is empty. Only
the physaddr's of the input and output image buffers are needed,
since the conversion context was created previously with
ipu_image_convert_prepare(). When the conversion completes, the run
pointer is returned to the completion callback.
void ipu_image_convert_abort(struct ipu_image_converter_ctx *ctx);
This will abort any active or pending conversions for this context.
Any currently active or pending runs belonging to this context are
returned via the completion callback with an error status.
void ipu_image_convert_unprepare(struct ipu_image_converter_ctx *ctx);
Unprepares the conversion context. Any active or pending runs will
be aborted by calling ipu_image_convert_abort().
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a macro that returns boolean true if the given ipu_rotate_mode
requires the use of the Image Rotator.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
of_match_device could return NULL, and so cause a NULL pointer
dereference later.
For fixing this problem, we use of_device_get_match_data(), this will
simplify the code a little by using a standard function for
getting the match data.
Testing the return value of of_device_get_match_data is also necessary
for avoiding a second NULL deref later on devtype.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
enable MU-MIMO air sniffer if it's supported by the NIC
Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When comparing command IDs, the group should be taken
into account so the same command/notification from a
different group doesn't trigger anything unexpected.
Fix this by comparing to the wide ID.
Fixes: commit 1738d60b31 ("iwlwifi: mvm: handle RX MPDUs separately")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Use skb_queue_empty() and not skb_peek_tail() to check for
empty list.
Avoid a redundant check as well - loop will take care of it.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
-----BEGIN PGP SIGNATURE-----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=/2cJ
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-rewrite-20160917-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Tracepoint addition and improvement
Here is a set of patches that add some more tracepoints and improve a couple
of existing ones. New additions include:
(1) Connection refcount tracking.
(2) Client connection state machine tracking.
(3) Tx and Rx packet lifecycle.
(4) ACK reception and transmission.
(5) recvmsg processing.
Updates include:
(1) Print the symbolic packet name in the Rx packet tracepoint.
(2) Additional call refcount trace events.
(3) Improvements to sk_buff tracking with AF_RXRPC.
In addition:
(1) Config option to inject packet loss during both transmission and
reception.
(2) Removal of some printks.
This series needs to be applied on top of the previously posted fixes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=MjVT
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-rewrite-20160917-1' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fixes & miscellany
Here are some more AF_RXRPC fix patches with a couple of miscellaneous
changes also. Fixes include:
(1) Make RxRPC IPv6 support conditional on IPv6 being available.
(2) Move the condition check in rxrpc_locate_data() into the caller and
check the error return.
(3) Fix the detection of the last received packet in recvmsg.
(4) Account calls that need acceptance and clean up any unaccepted ones if
the socket gets closed.
(5) Fix the cleanup of client connections.
(6) Fix the soft-ACK parsing and the retransmission of packets based on
those ACKs.
(7) Suppress transmission of an ACK when there's no pending ACK to
transmit because another thread stole it.
And some miscellany:
(8) Whitespace removal.
(9) Switch-value consistency in rxrpc_send_call_packet().
(10) Fix the basic transmission packet size to allow for spur-of-the-moment
jumbo DATA packet production.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal says:
====================
sched: convert queues to single-linked list
During Netfilter Workshop 2016 Eric Dumazet pointed out that qdisc
schedulers use doubly-linked lists, even though single-linked list
would be enough.
The double-linked skb lists incur one extra write on enqueue/dequeue
operations (to change ->prev pointer of next list elem).
This series converts qdiscs to single-linked version, listhead
maintains pointers to first (for dequeue) and last skb (for enqueue).
Most qdiscs don't queue at all and instead use a leaf qdisc (typically
pfifo_fast) so only a few schedulers needed changes.
I briefly tested netem and htb and they seemed fine.
UDP_STREAM netperf with 64 byte packets via veth+pfifo_fast shows
a small (~2%) improvement.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This change replaces sk_buff_head struct in Qdiscs with new qdisc_skb_head.
Its similar to the skb_buff_head api, but does not use skb->prev pointers.
Qdiscs will commonly enqueue at the tail of a list and dequeue at head.
While skb_buff_head works fine for this, enqueue/dequeue needs to also
adjust the prev pointer of next element.
The ->prev pointer is not required for qdiscs so we can just leave
it undefined and avoid one cacheline write access for en/dequeue.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
After previous patch these functions are identical.
Replace __skb_dequeue in qdiscs with __qdisc_dequeue_head.
Next patch will then make __qdisc_dequeue_head handle
single-linked list instead of strcut sk_buff_head argument.
Doesn't change generated code.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Moves qdisc stat accouting to qdisc_dequeue_head.
The only direct caller of the __qdisc_dequeue_head version open-codes
this now.
This allows us to later use __qdisc_dequeue_head as a replacement
of __skb_dequeue() (which operates on sk_buff_head list).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
A followup change will replace the sk_buff_head in the qdisc
struct with a slightly different list.
Use of the sk_buff_head helpers will thus cause compiler
warnings.
Open-code these accesses in an extra change to ease review.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the retrn value check which testing the wrong variable
in cfg_queues_uld().
Fixes: 94cdb8bb99 ("cxgb4: Add support for dynamic allocation of
resources for ULD")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nelson Chang says:
====================
net: ethernet: mediatek: add HW LRO functions
The series add the large receive offload (LRO) functions by hardware and
the ethtool functions to configure RX flows of HW LRO.
changes since v3:
- Respin the patch by the newer driver
- Move the dts description of hwlro to optional properties
changes since v2:
- Add ndo_fix_features to prevent NETIF_F_LRO off while RX flow is programmed
- Rephrase the dts property is a capability if the hardware supports LRO
changes since v1:
- Add HW LRO support
- Add ethtool hooks to set LRO RX flows
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the dts property for the capability if the hardware supports LRO.
Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The codes add ethtool functions to set RX flows for HW LRO. Because the
HW LRO hardware can only recognize the destination IP of TCP/IP RX flows,
the ethtool command to add HW LRO flow is as below:
ethtool -N [devname] flow-type tcp4 dst-ip [ip_addr] loc [0~1]
Otherwise, cause the hardware can set total four destination IPs, each
GMAC (GMAC1/GMAC2) can set two IPs separately at most.
Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The codes add the large receive offload (LRO) functions by hardware as below:
1) PDMA has total four RX rings that one is the normal ring, and others can
be configured as LRO rings.
2) Only TCP/IP RX flows can be offloaded. The hardware can set four IP
addresses at most, if the destination IP of the RX flow matches one of
them, it has the chance to be offloaded.
3) There three RX flows can be offloaded at most, and one flow is mapped to
one RX ring.
4) If there are more than three candidate RX flows, the hardware can
choose three of them by throughput comparison results.
Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allocate resources dynamically to cxgb4's Upper layer driver's(ULD) like
cxgbit, iw_cxgb4 and cxgb4i. Allocate resources when they register with
cxgb4 driver and free them while unregistering. All the queues and the
interrupts for them will be allocated during ULD probe only and freed
during remove.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 311b21774f ("sctp: simplify sk_receive_queue locking"), a call
to 'skb_queue_splice_tail_init()' has been made explicit. Previously it was
hidden in 'sctp_skb_list_tail()'
Now, the code around it looks redundant. The '_init()' part of
'skb_queue_splice_tail_init()' should already do the same.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The XDP_TX action can fail transmitting the frame in case the TX ring
is full or port is down. In case of TX failure it should drop the
frame, and not as now call 'break' which is the same as XDP_PASS.
Fixes: 9ecc2d8617 ("net/mlx4_en: add xdp forwarding and data write support")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mahesh Bandewar says:
====================
IPvlan introduce l3s mode
Same old problem with new approach especially from suggestions from
earlier patch-series.
First thing is that this is introduced as a new mode rather than
modifying the old (L3) mode. So the behavior of the existing modes is
preserved as it is and the new L3s mode obeys iptables so that intended
conn-tracking can work.
To do this, the code uses newly added l3mdev_rcv() handler and an
Iptables hook. l3mdev_rcv() to perform an inbound route lookup with the
correct (IPvlan slave) interface and then IPtable-hook at LOCAL_INPUT
to change the input device from master to the slave to complete the
formality.
Supporting stack changes are trivial changes to export symbol to get
IPv4 equivalent code exported for IPv6 and to allow netfilter hook
registration code to allow caller to hold RTNL. Please look into
individual patches for details.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In a typical IPvlan L3 setup where master is in default-ns and
each slave is into different (slave) ns. In this setup egress
packet processing for traffic originating from slave-ns will
hit all NF_HOOKs in slave-ns as well as default-ns. However same
is not true for ingress processing. All these NF_HOOKs are
hit only in the slave-ns skipping them in the default-ns.
IPvlan in L3 mode is restrictive and if admins want to deploy
iptables rules in default-ns, this asymmetric data path makes it
impossible to do so.
This patch makes use of the l3_rcv() (added as part of l3mdev
enhancements) to perform input route lookup on RX packets without
changing the skb->dev and then uses nf_hook at NF_INET_LOCAL_IN
to change the skb->dev just before handing over skb to L4.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add _nf_register_hooks() and _nf_unregister_hooks() calls which allow
caller to hold RTNL mutex.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make ip6_route_input_lookup available outside of ipv6 the module
similar to ip_route_input_noref in the IPv4 world.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just fixup to runtime pm usage and some cleanups.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
Subject: [PATCH, RESEND] drm: exynos: avoid unused function warning
drm/exynos: g2d: fix system and runtime pm integration
drm/exynos: rotator: fix system and runtime pm integration
drm/exynos: gsc: fix system and runtime pm integration
drm/exynos: fimc: fix system and runtime pm integration
exynos-drm: Fix unsupported GEM memory type error message to be clear
Jiri Pirko says:
====================
net: return offloaded stats as default and expose original sw stats
The problem we try to handle is about offloaded forwarded packets
which are not seen by kernel. Let me try to draw it:
port1 port2 (HW stats are counted here)
\ /
\ /
\ /
--(A)---- ASIC --(B)--
|
(C)
|
CPU (SW stats are counted here)
Now we have couple of flows for TX and RX (direction does not matter here):
1) port1->A->ASIC->C->CPU
For this flow, HW and SW stats are equal.
2) port1->A->ASIC->C->CPU->C->ASIC->B->port2
For this flow, HW and SW stats are equal.
3) port1->A->ASIC->B->port2
For this flow, SW stats are 0.
The purpose of this patchset is to provide facility for user to
find out the difference between flows 1+2 and 3. In other words, user
will be able to see the statistics for the slow-path (through kernel).
Also note that HW stats are what someone calls "accumulated" stats.
Every packet counted by SW is also counted by HW. Not the other way around.
As a default the accumulated stats (HW) will be exposed to user
so the userspace apps can react properly.
This patchset add the SW stats (flows 1+2) under offload related stats, so
in the future we can expose other offload related stat in a similar way.
---
v9->v10:
- patch 2/3
- removed unnecessary ()s as pointed out by Nik
v8->v9:
- patch 2/3
- add using of idxattr and prividx
v7->v8:
- patch 2/3
- move helping const from uapi to rtnetlink
- cancel driver xstat nesting if it is empty
v6->v7:
- patch 1/3:
- ndo interface changed to get the wanted stats type as an input.
- change commit message.
- patch 2/3:
- create a nesting for offloaded stat and put SW stats under it.
- change the ndo call to indicate which offload stats we wants.
- change commit message.
- patch 3/3:
- change ndo implementation to match the changes in the previous patches.
- change commit message.
v5->v6:
- patch 2/4 was dropped as requested by Roopa
- patch 1/3:
- comment changed to indicate that default stats are combined stats
- commit massage changed
- patch 2/3: (previously 3/4)
- SW stats return nothing if there is no SW stats ndo
v4->v5:
- updated cover letter
- patch3/4:
- using memcpy directly to copy stats as requested by DaveM
v3->v4:
- patch1/4:
- fixed "return ()" pointed out by EricD
- patch2/4:
- fixed if_nlmsg_size as pointed out by EricD
v2->v3:
- patch1/4:
- added dev_have_sw_stats helper
- patch2/4:
- avoided memcpy as requested by DaveM
- patch3/4:
- use new dev_have_sw_stats helper
v1->v2:
- patch3/4:
- fixed NULL initialization
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the default statistics ndo to return HW statistics
(like the one returned by ethtool_ops).
The HW stats are collected to a cache by delayed work every 1 sec.
Implement the offload stat ndo.
Add a function to get SW statistics, to be called from this function.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a nested attribute of offload stats to if_stats_msg
named IFLA_STATS_LINK_OFFLOAD_XSTATS.
Under it, add SW stats, meaning stats only per packets that went via
slowpath to the cpu, named IFLA_OFFLOAD_XSTATS_CPU_HIT.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new ndo to return statistics for offloaded operation.
Since there can be many different offloaded operation with many
stats types, the ndo gets an attribute id by which it knows which
stats are wanted. The ndo also gets a void pointer to be cast according
to the attribute id.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
