Add HW version check to remove referencing macros
not available in r96 headers. RING_ID_BMSK seems to be
removed in r96, Use it only for older version hw headers.
Change-Id: I0467a900317581ae7040ab0baae288ed9a905d60
CRs-Fixed: 1090092
Fix below in DPTRACE feature:
1) Change timestamp in DPTRACE records to hr:mm:sec.usec format.
2) Change default configuration in qdf_dp_trace_clear_buffer()
to match that of qdf_dp_trace_init().
Change-Id: Ibad674e3b94a2c7ac5cbefa5fc18efb48f6ca694
CRs-Fixed: 1098928
scan req flags for FW should be set based on the flags in request.
scan request is assuming num_bssid as one and copying single
mac_address but it should support more bssid and hence change this
to add multiple bssids.
Change-Id: I3fbad3353c1a9904847e09c527254e104cb6db71
CRs-Fixed: 1099421
Currently, WMI is using dfs flag offset that needs to be set from upper
layers. But these offset is defined by wmi and it is correct to set it
from WMI itself.
Change-Id: Ib9ff2122ed5b92fb21b01a87f0e99c3a54d1a83c
CRs-Fixed: 1099416
irq_enable/disable may be different for legacy srng and msi
vs single line interrupts. Provide a place to insert the interrupt
mitigation scheeme.
Change-Id: I66559a404b0c2105da143215203c04f2311a763a
CRs-Fixed: 1093364
Use the msi vectors allocated by the platform driver
for the copy engine interrupts.
Change-Id: I3fa96daa3222524ffe31659c12b3c0f5a2725e18
CRs-Fixed: 1093364
QCA6290 needs the platform QMI handshake to kick off
fw. Platform will have logic to not do QMI for targets/
platforms that don't support QMI.
Change-Id: I9643d778f25e4059baae903876d44dd2c77d9aaa
CRs-Fixed: 1097382
CONFIG_PLD_PCIE_INIT indicates that pcie initialization
and io remap have allready been done by the platform driver,
and should not be re-done by the wlan driver.
This is to facilitate shared controll between the MHI & wlan
drivers.
Removes a call to pci_disable_msi that might be needed in the
normal case.
Change-Id: I5c1eb72d998f53e3bb2e6751008d8a0c5c46a516
CRs-Fixed: 1097340
hif_pci_probe_tgt_wakeup has been made static, so the compilation
must follow its conditional use.
Change-Id: I4c289ed7c7bb8c5b6fbde265c37dc0c3665b81fa
CRs-Fixed: 1096402
In function wma_get_buf_extscan_change_monitor_cmd() and
wma_get_buf_iextscan_hotlist_cmd(), numAp is of type uint32_t
but it is assigned to variable numap of type int.
Fix this by making 'numap' also of same type 'uint32_t'.
Change-Id: I02502f05d2305f62cbde47db2893770673d19fc3
CRs-Fixed: 1096384
This is a qcacld-2.0 to qcacld-3.0 propagation.
In file ar9888def.h error: '_AR9888DEF_H_' is used as a header guard here,
followed by #define of a different macro [-Werror,-Wheader-guard]
ar9888def.h: note: 'AR9888__AR9888DEF_H_' is defined here; did you mean '_AR9888DEF_H_'?
Fix the header file include guard properly.
Change-Id: Ic05a829eadbf974598370c494a5cff10201ec600
CRs-Fixed: 1091052
Fix the packet offset value filled in Tx descriptor.
Also fix a crash in Tx completion handler because of storing wrong
pointer in tx descriptor chain (next)
CRs-Fixed: 1088985
Change-Id: Ie2895700e0bb7e6f4b7b09a01da07a17d1c41160
Propagate from qcacld-2.0 to qcacmn
This change add the corresponding support for QCA9379 which has new chip ID.
Change-Id: I252b75d9ae7b760a6a8f6931b4db753f50d3baba
CRs-Fixed: 990755
Add hal_srng unlock API to be used in completions reap funtion (CE) in
which HW head pointer/tail pointers need not be updated
CRs-Fixed: 1088985
Change-Id: Ia54b144e5dfd0b37bbabf992c764697928ddf76d
Correct the configuration values for number of Tx and Rx
descriptors to be used for DP
CRs-Fixed: 1088985
Change-Id: Ica8e5021e7bd5ba83fbe3bd34243bfff4089353a
Do not start interrupt poll timer for processing datapath SRNG
interrupts till any VAP is created and is up.
CRs-Fixed: 1088985
Change-Id: I3a9d148024f66d824dc839bdf8b158c351fe22cd
Add timer instance in dp_soc for interrupt poll, to function in
poll mode till interrupts are enabled
CRs-Fixed: 1088985
Change-Id: I0d3207fe143b30317618d78b927133c43a552ef6
PCI base address should be offset by 0x0c000000
to access WLAN registers from E4.1 emulation release.
Change-Id: I022184398a457271bb495ac11421de59bc3d3857
CRs-Fixed: 1090092
Include Hawkeye emulation PCI device ids in probe list. This is required
to enable PCI based emulation platform to probe device and load driver
succesfully.
Change-Id: If6e750a2add334794e2d62085007fc300600f853
CRs-Fixed: 1090092
Define basic dispatcher framework for init/deinit. Each individual
component is supposed to define its own init/deinit primitives and
remove dummy place holder primitives.
Change-Id: Ibaf64c6a6715da2ab02f646ddb4fca4e6f46e031
CRs-Fixed: 1095741
In function send_roam_scan_offload_mode_cmd_tlv, assign qos_qnabled
parameter being sent to firmware. Otherwise firmware will not be able
to get correct qos_caps value.
Change-Id: I3bdf43594f68cb0780f2947fff9db723644b5dac
CRs-Fixed: 1092258
Propagation from qcacld-2.0 to qca-wifi-host-cmn.
If the module name is changed to something other than wlan in
Makefile or Kbuild, then MULTI_IF_NAME is defined to be the module name.
When MULTI_IF_NAME is defined, the names for the config files, log files,
and firmware files are prepended or appended with MULTI_IF_NAME. This
prevents file name collisions allowing multiple instances of this driver
to be loaded with different module names.
Change-Id: Id880c5fe423eb0b2a2c01677d8fa7c4a784c74df
CRs-Fixed: 946520
The term "agile" is used by hardware for swift/fast channel change.
Use precac for the zeroCACDFS instead.
Change-Id: I35f4d61cc93b3542feb8b286cbdf3a4474df5a75
Crs-fixed: 1073945
A new iwpriv command has been added to configure the period
and wlan duration for a btcoex duty cycle.
As a part of this registring the wmi_service_btcoex_duty_cycle
for WMI_SERVICE_BTCOEX_DUTY_CYCLE.
Also send_btcoex_wlan_priority_cmd registrtaion for btcoex
duty cycle command in non_tlv_ops.
Change-Id: I7f3bfdfd9804566d6d0b7cce7025e99db57d0e23
Acked-by: Basamma Yakkanahalli <ybasamma@qti.qualcomm.com>
CRs-Fixed: 1064437
Agile flag WMI_CHAN_FLAG_AGILE_MODE added. When this flag is set,
the primary VHT80 will not be affected when channel change is done.
Change-Id: Ie6bce12ec955c0c8a79246dda57092808611803d
CRs-Fixed: 1072504
