qcacld-2.0 to qcacld-3.0 propagation.
WMI changes to handle action frames of different category in WoW mode
Change-Id: Icbf9ad7cac93dd75ddb976a0f781e20b60201896
CRs-Fixed: 865207
qcacld-2.0 to qcacld-3.0 propagation
Add support for scenario debug logging
WMI changes to control WISA features of firmware from host
Change-Id: I01d96c423b6241248242aa2feae6887d8f202691
CRs-Fixed: 865207
qdf_wait_single_event expects msecs as the timeout value.
However, two references in dp, first of which is this instance,
passes the value in ticks. This causes the value to be converted
to msecs a second time by the function and hence an incorrect
timeout value.
The other instance is in the qcacld-3.0 project.
Change-Id: Ic73f5b22e987589c1f0607ced6ae9e51ff3c52c2
Acked-by: Orhan K AKYILDIZ <oka@qca.qualcomm.com>
CRs-fixed: 1012345
MAX_NUM_RECEIVES, the maximum number of messages to be processed
by the bottom-half before control is returned to kernel was
defined as different (but close) numbers for NAPI and non-NAPI
cases (based on NAPI feature flag), 100/1000 for non-NAPI and
128/1024 for NAPI cases.
With this update the value is set to 128/1024 regardless of NAPI
feature being compiled or not.
Change-Id: I152afd30b302d52426c07ae39a95af388ba0ae52
Acked-by: Orhan K AKYILDIZ <oka@qca.qualcomm.com>
CRs-Fixed: 1012336
If lro_disable is called after cds_close, which is the case
for module unloads, then many of the pointers used in dereg
sequence are NULL (CE_state, hif, txrx_pdev). There is a case,
when interfaces are removed, when these pointers are there.
Check pointers before using them in dereg code.
Update hif_map_service_to_pipe so that it will return E_INVAL if
the service is not in the table. Add logs for cases where either
leg information is not updated on return.
Acked-by: Orhan K AKYILDIZ <oka@qca.qualcomm.com>
Change-Id: I5b88a297134dcc1d7a6a68dd2a9879dfd1553a7e
CRs-Fixed: 1014428
Shadow registers and DDR are not guaranteed to reflect
the actual copy engine register values before transactions
are performed.
Also adds debug code to verify that the register values
make sense.
Change-Id: Ied0352638765571545f92b2e0dc18b4ca7a399a7
CRs-Fixed: 1012744
There are some WMI APIs which are using invalid arguments in
WMI interface layer. Send correct arguments.
CRs-Fixed: 1014141
Change-Id: If483a3ebcc62693be6ac6d3a767cb98e3bf064c7
Add QDF_BUS_YTPE_NONE in qdf_bus_type, which is used to represent
error bus type.
Change-Id: I274a795d32b2a5581b8849f5827cb8ac3bbf169b
CRs-Fixed: 1000113
Add host support for WMI POWER DEBUG command to control mac_core power features
for run time debugging.
Change-Id: Ifc810b24222507f1445a84a54caa8aee5e815b38
CRs-Fixed: 1007598
Increase the CE ring that is used by firmware for HIF memcpy.
Increase the size to 0x4000
Change-Id: I8a71c795469b7cd51c3c2609a8e22a3b19ab7e77
CRs-Fixed: 1006872
Fastpath & napi did not have CE event recording.
This is a vital debug feature.
Change-Id: I73118f4fa5177158d6d489ea5b9ebf82f05c1229
CRs-Fixed: 1009273
CE_COUNT_MAX should be the maximum number of CE's supported.
Set it to 12 to support all chipsets dynamically.
Change-Id: Id65278ee452a4ca2e3b0dcfe5c082a7e7a286347
CRs-Fixed: 1002084
TargetSendSuspendComplete should take the HTCInitInfo
context as an argument. The wow_nack should be its
own argument.
Change-Id: Ib13385cf0a04730d066ffcd53c1f669c7a5ced60
CRs-Fixed: 1003793
Use QDF macro to check if we are in epping mode.
Hardcode the ce engine to use interrupts in
epping mode.
Change-Id: Ie58c2efffdced03f24905469319eabc0af4ed228
CRs-Fixed: 1003792
A definition of cnss_wlan_pci_link_down in a header file
did not have the static keyword.
Change-Id: I701682486a8db2c0cfce839706aacb85757df616
CRs-Fixed: 1003817
icnss_dispatch_irq is a stub for a non-existent function.
Make a pci function that doesn't use a global data structure.
Change-Id: I636d59cb465acf1366269d96a5dcacf910f8d78c
CRs-Fixed: 1002083
Remove interupt enable/disable at group level since
in register set 81, these registers are not provided.
Don't enable/disable the ce irqs at the qgic
since the interrupts are edge driven, enabling and disabling the interrupt
in the qgic should not be necessary. Also remove an unneeded read
of a status register.
Change-Id: I2c20ea26c23dc672697d53cd5433d855d9332b13
CRs-Fixed: 997176
qcacld-2.0 to qcacmn propagation
Issues are seen where memory allocation takes 300-1000ms.
So to detect this reduce the QDF_GET_MEMORY_TIME_THRESHOLD value
to print the time taken by kmalloc, to 300ms from 3 sec.
Change-Id: I0f7e1587b2ddd2839d70a19b047aa46bb6a2cea1
CRs-Fixed: 970017
Replace the WMI command WMI_SOC_SET_DUAL_MAC_CONFIG_CMDID
and event WMI_SOC_SET_DUAL_MAC_CONFIG_RESP_EVENTID with
WMI_PDEV_SET_MAC_CONFIG_CMDID and
WMI_PDEV_SET_MAC_CONFIG_RESP_EVENTID respectively since
the former are obsolete. The new WMI commands and events
additionally carry the pdev id.
Change-Id: I77eab3ead005bbb7f951ce7e077cd661813cb628
CRs-Fixed: 989502
Replace the obsolete WMI command WMI_SOC_SET_HW_MODE_CMDID with
WMI_PDEV_SET_HW_MODE_CMDID and event WMI_SOC_SET_HW_MODE_RESP_EVENTID
with WMI_PDEV_SET_HW_MODE_RESP_EVENTID respectively. These new WMI
commands and events additionally carry the pdev id and all mac id
references are replaced with pdev id.
Change-Id: If2a3f93dcd1947eedce8d4eac8ed936166f7e078
CRs-Fixed: 989502
Add target bus type field in qdf context, as bus type
needs to accessed at multiple layer.
Change-Id: I62b23d68743fedf205bb3859c0de50568ca09b7a
CRs-Fixed: 1009993
FL macro definition is used in converged layer, move
FL macro definition from umac layer to common QDF layer.
Change-Id: Id3c4383c385eb3d6391c4c066b0034fb2f053cdc
CRs-Fixed: 1008835
Replace mac_id with pdev_id for WMI pdev commands and
vdev start response handler to support multi-radio in
converged firmware. In order to maintain backward
compatibility with old fw, host needs to check
WMI_SERVICE_DEPRECATED_REPLACE service id in service
bitmap and needs to fill pdev id or mac id accordingly.
Change-Id: I7e6b40b4c0bd20e967dc0a383b480068e256486f
CRs-Fixed: 994415
Do not update physical address in control block while
nbuf push/pull operation for WIN.
Also uncomment dma_sync_single_for_cpu function in
__qdf_nbuf_sync_single_for_cpu.
Change-Id: Id80ed3e01162e44d90981885c3d387950323bce8
CRs-Fixed: 1006569
WIN platform uses non-tlv implementation for host to
target wmi commands. Add support for non-tlv
implementation in common wmi layer.
Change-Id: I1f832695b0d41b521be6b18df0cad31aae11b6c9
Acked-by: Kiran Venkatappa <kiranv@qti.qualcomm.com>
CRs-Fixed: 1005778
Update htc_endpoint only for htt tx endpoint to avoid
double freeing of Tx Queue packets as it will be
freed in htt_htc_misc_pkt_pool_free.
Rename htc_endpoint to htc_htt_tx_endpoint to reflect
it's appropriate use.
Change-Id: I736ba08505acc829eb15be30538553dd945695f6
CRs-Fixed: 1006498
WLAN host driver is not using correct API to allocate 2 MB shared
memory for FW when QMI by pass is enabled. Use proper API to
allocate 2 MB shared memory for FW CE access.
Change-Id: I7efa4be2e703b32dc86fd660640881afa4ce2bcd
CRs-Fixed: 999278
Replace the obsolete WMI command WMI_SOC_SET_PCL_CMDID with
WMI_PDEV_SET_PCL_CMDID. WMI_PDEV_SET_PCL_CMDID carries the weightage
for all the channels (preferred and non-preferred) in the same order
and length as that of the command WMI_SCAN_CHAN_LIST_CMDID. This is
in contrast to the command WMI_SOC_SET_PCL_CMDID which carries only
the preferred channel list.
Change-Id: I040f4307491d3242d2e9409dbbe8005c4b307bf5
CRs-Fixed: 989502
