A namespace may be detached from a controller, but a user may be holding
a reference to it. Attaching a new namespace with the same NSID will create
duplicate names when using the NSID to name the disk.
This patch uses an IDA that is released only when the last reference is
released instead of using the namespace ID.
Signed-off-by: Keith Busch <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Unmapping the registers on reset or shutdown is not necessary. Keeping
the mapping simplifies reset handling.
Signed-off-by: Keith Busch <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
In the following patch, the way for figuring out
the last bvec will be changed with a bit cost introduced,
so return immediately if the queue doesn't have virt
boundary limit. Actually most of devices have not
this limit.
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
The bio passed to bio_will_gap() may be fast cloned from upper
layer(dm, md, bcache, fs, ...), or from bio splitting in block
core.
Unfortunately bio_will_gap() just figures out the last bvec via
'bi_io_vec[prev->bi_vcnt - 1]' directly, and this way is obviously
wrong.
This patch introduces two helpers for getting the first and last
bvec of one bio for fixing the issue.
Cc: [email protected]
Reported-by: Sagi Grimberg <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
The argument structs are used in arrays for G_TOPOLOGY IOCTL. The
arguments themselves do not need to be aligned to a power of two, but
aligning them up to the largest basic type alignment (u64) on common ABIs
is a good thing to do.
The patch changes the size of the reserved fields to 5 or 6 u32's and
aligns the size of the struct to 8 bytes so we do no longer depend on the
compiler to perform the alignment.
While at it, add __attribute__ ((packed)) to these structs as well.
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Here are some new device ids and a patch removing the mxu11x0 driver,
which turned out not to be needed.
Signed-off-by: Johan Hovold <[email protected]>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=f2SZ
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Jonan writes:
USB-serial fixes for v4.5-rc7
Here are some new device ids and a patch removing the mxu11x0 driver,
which turned out not to be needed.
Signed-off-by: Johan Hovold <[email protected]>
- Fix a runtime PM suspend/resume bug in the RCAR driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5Ovl
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull late GPIO fix from Linus Walleij:
"Regressions never arrive when you want them to, so here is a late fix
for the Renesas RCAR GPIO driver. It only affects that driver on the
very specific Renesas platforms:
- Fix a runtime PM suspend/resume bug in the RCAR driver"
* tag 'gpio-v4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: rcar: Add Runtime PM handling for interrupts
Including one fix for Intel VT-d:
* Use BUS_NOTIFY_REMOVED_DEVICE notifier to unbind a device from
its domain _after_ it has been unbound from its driver. This
fixes a BUG_ON being triggered in the PCI hotplug path.
And three for AMD IOMMU:
* Add a workaround for a hardware issue with ATS in use
* Fix ATS enable/disable balance when a device is removed
* Fix a boot warning being triggered when the system has IOMMU
performance counters and PCI device 00:00.0 is not covered by
the IOMMU
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=uPsu
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"One fix for Intel VT-d:
- Use BUS_NOTIFY_REMOVED_DEVICE notifier to unbind a device from its
domain _after_ it has been unbound from its driver. This fixes a
BUG_ON being triggered in the PCI hotplug path.
And three for AMD IOMMU:
- Add a workaround for a hardware issue with ATS in use
- Fix ATS enable/disable balance when a device is removed
- Fix a boot warning being triggered when the system has IOMMU
performance counters and PCI device 00:00.0 is not covered by the
IOMMU"
* tag 'iommu-fixes-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Use BUS_NOTIFY_REMOVED_DEVICE in hotplug path
iommu/amd: Detach device from domain before removal
iommu/amd: Apply workaround for ATS write permission check
iommu/amd: Fix boot warning when device 00:00.0 is not iommu covered
This fixes two minor bugs: error handling in vhost,
and capability processing in virtio.
Signed-off-by: Michael S. Tsirkin <[email protected]>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW1w/9AAoJECgfDbjSjVRpOwMH/10g1iyVAF7FR3RgAgcutROy
mt7RNRGhcJrccB3imWvA5llHfpEQe6b2IGRRjLpy3cHOqoytSJ8F9GbAv/Ya6rBY
ZNsapZkEacLX3Byi/Tll9C6pP7eCHswveBwreXVYpxerTuViorqU0RQXHQCY1nBa
jAHr7eHp7PlSjAKlwUX181/cDKF35VMchCE+NfSmgDFnkOMb8E3TVXqV1wuSZSaf
Ci2IgULrQQC2rzxFg/ZQePweSP9cBrhpX3c3VkVa/N0Io4DOQWLg2KUbwzrs/mel
i4rlKngwwRO0rIsWU+J5hMq4Vqg+Zv6mVQGm3FFAJWle03rUOZPYFCPwbKA6HNU=
=HeDc
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull minor virtio/vhost fixes from Michael Tsirkin:
"This fixes two minor bugs: error handling in vhost, and capability
processing in virtio"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: fix error path in vhost_init_used()
virtio-pci: read the right virtio_pci_notify_cap field
* fix hang caused by fbconsole blink timer
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJW2CSsAAoJEPo9qoy8lh71hjcQAK071t3TPSzKc1+GmLy2yVnV
suaT3C+0uY1yha/V8kRUrwUA4p3wRSHDvr/jF1SSSTgc4J8mY/1mxXYIFmAxfCyb
t/6fKTvHqDFHtCTMCM5RXK+3cR/zTu74KqLmMRllkMa4da7Iyr5fBBnfdryo1yjg
Brj++PANYKXT1B7HR9vrUAL7sU+2y976/oGtAtqTSfRuo4rppXh3PFaNZHJFgdwI
T8wkVIOPJHt9WdSnmXkVzMYeeXRp4mHNev2+tD7OvcH/b21Y+b1aO/ebIbeXWk+T
Or3SWj/5Ckje368NMvIZKywuGcRA9QHMDNqDhBU+pIF8D8Z0TcSd9spV0v94/Z/l
1DK1NROcE0rjcJvCFjhLcgXX9upsVlEQKDR94SsbkgJAv/ToXP2umoUCu8VXlO7Y
tqvW8aU06cpi4/UXBq61riqVP2pOz6mYGWMFHw26tFpmAq3+NvFvW/Zp1UI0pMW/
k4hbWDetmxPJA0T1UJcRHLHeumkEsyHTUgMFbD9UcM6YGs6tbsHw2aWgbEAGYMIa
TMnM+vi+xRWThmUN558SBj7fZ17x/H7pJJllNvL6myn514BPBTmpmGCXQFxqOlc3
/6AQEdYOMhG5z3axqCT+Hbjg8SQMeY7gAROU/Ql7VETJZZsRtIdl2Q/bynsjO06S
8HOemQdC2DZbXRHCdb5t
=8zQX
-----END PGP SIGNATURE-----
Merge tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fix from Tomi Valkeinen:
"Fix hang caused by fbconsole blink timer"
* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
fbcon: set a default value to blink interval
The representation of external connections got some heated
discussions recently. As we're too close to the merge window,
let's not set those entities into a stone.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
According to IBTA spec v1.3 section 12.7.19, QPs should use GRH when
the path returned by the SA has hop-limit > 0. Currently, we do that
only for the > 1 case, fix that.
Fixes: 6d969a471b ('IB/sa: Add ib_init_ah_from_path()')
Signed-off-by: Or Gerlitz <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
While testing audio with pxa2xx-ac97, underrun were happening while the
user application was correctly feeding the music. Debug proved that the
cyclic transfer is not cyclic, ie. the last descriptor did not loop on
the first.
Another issue is that the descriptor length was always set to 8192,
because of an trivial operator issue.
This was tested on a pxa27x platform.
Fixes: a57e16cf03 ("dmaengine: pxa: add pxa dmaengine driver")
Reported-by: Vasily Khoruzhick <[email protected]>
Tested-by: Vasily Khoruzhick <[email protected]>
Signed-off-by: Robert Jarzmik <[email protected]>
Signed-off-by: Vinod Koul <[email protected]>
Currently, the inlen field of the vendor's part of the command
doesn't match the command buffer. This happens because the inlen
accommodates ib_uverbs_cmd_hdr which is deducted from the in buffer.
This is problematic since the vendor function could be called either
from the legacy verb (where the input length mismatches the actual
length) or by the extended verb (where the length matches). The vendor
has no idea which function calls it and therefore has no way to know
how the length variable should be treated.
Fixing this by aligning the inlen to the correct length.
All vendor drivers either assumed that inlen >= sizeof(vendor_uhw_cmd)
or just failed wrongly (mlx5) and fixed in this patch.
Fixes: cfb5e088e2 ('IB/mlx5: Add CQE version 1 support to user QPs and SRQs')
Signed-off-by: Majd Dibbiny <[email protected]>
Reviewed-by: Matan Barak <[email protected]>
Reviewed-by: Haggai Eran <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Normal SRQs, unlike XRC SRQs, don't have user-index, therefore
avoid verifying it and using it.
Fixes: cfb5e088e2 ('IB/mlx5: Add CQE version 1 support to user QPs and SRQs')
Signed-off-by: Majd Dibbiny <[email protected]>
Reviewed-by: Matan Barak <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
When destroying a hw_breakpoint event, the kernel oopses as follows:
Unable to handle kernel paging request for data at address 0x00000c07
NIP [c0000000000291d0] arch_unregister_hw_breakpoint+0x40/0x60
LR [c00000000020b6b4] release_bp_slot+0x44/0x80
Call chain:
hw_breakpoint_event_init()
bp->destroy = bp_perf_event_destroy;
do_exit()
perf_event_exit_task()
perf_event_exit_task_context()
WRITE_ONCE(child_ctx->task, TASK_TOMBSTONE);
perf_event_exit_event()
free_event()
_free_event()
bp_perf_event_destroy() // event->destroy(event);
release_bp_slot()
arch_unregister_hw_breakpoint()
perf_event_exit_task_context() sets child_ctx->task as TASK_TOMBSTONE
which is (void *)-1. arch_unregister_hw_breakpoint() tries to fetch
'thread' attribute of 'task' resulting in oops.
Peterz points out that the code shouldn't be using bp->ctx anyway, but
fixing that will require a decent amount of rework. So for now to fix
the oops, check if bp->ctx->task has been set to (void *)-1, before
dereferencing it. We don't use TASK_TOMBSTONE, because that would
require exporting it and it's supposed to be an internal detail.
Fixes: 63b6da39bb ("perf: Fix perf_event_exit_task() race")
Signed-off-by: Ravi Bangoria <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
This patch applies the microphone-related fix created for the Acer
Aspire E1-572 to the E1-472 as well, as it uses the same Realtek ALC282
CODEC and demonstrates the same issues.
This patch allows an external, headset microphone to be used and limits
the gain on the (quite noisy) internal microphone.
Signed-off-by: Simon South <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Make the base offset hexadecimal to simplify debugging since the base
addresses are hex too.
The offsets for connectors is also changed to start after the 'reserved'
range 0x10000-0x2ffff.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Fixes for radeon and amdgpu:
- Fix GPUVM flushing on CI and VI
- Misc DPM and Powerplay fixes
- VCE DPM fixes for CZ/ST
- DP hotplug fix
* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: return from atombios_dp_get_dpcd only when error
drm/amdgpu/cz: remove commented out call to enable vce pg
drm/amdgpu/powerplay/cz: enable/disable vce dpm independent of vce pg
drm/amdgpu/cz: enable/disable vce dpm even if vce pg is disabled
drm/amdgpu/gfx8: specify which engine to wait before vm flush
drm/amdgpu: apply gfx_v8 fixes to gfx_v7 as well
drm/amd/powerplay: send event to notify powerplay all modules are initialized.
drm/amd/powerplay: export AMD_PP_EVENT_COMPLETE_INIT task to amdgpu.
drm/radeon/pm: update current crtc info after setting the powerstate
drm/amdgpu/pm: update current crtc info after setting the powerstate
Pause/unpause graph tracing around do_suspend_lowlevel as it has
inconsistent call/return info after it jumps to the wakeup vector.
The graph trace buffer will otherwise become misaligned and
may eventually crash and hang on suspend.
To reproduce the issue and test the fix:
Run a function_graph trace over suspend/resume and set the graph
function to suspend_devices_and_enter. This consistently hangs the
system without this fix.
Signed-off-by: Todd Brandt <[email protected]>
Cc: All applicable <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Pull parisc fixes from Helge Deller:
"We wire up the copy_file_range syscall, fix two bugs in the parisc
ptrace code and have a trivial fix for floppy.h to clarify an
expression with parentheses"
* 'parisc-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Wire up copy_file_range syscall
parisc: Fix ptrace syscall number and return value modification
parisc: Use parentheses around expression in floppy.h
Pull cifs fixes from Steve French:
"Various small CIFS/SMB3 fixes for stable:
Fixes address oops that can occur when accessing Macs with SMB3, and
another problem found to Samba when read responses queued (e.g. with
gluster under Samba)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Fix duplicate line introduced by clone_file_range patch
Fix cifs_uniqueid_to_ino_t() function for s390x
CIFS: Fix SMB2+ interim response processing for read requests
cifs: fix out-of-bounds access in lease parsing
The exit path will do some final updates to the VM of an exiting process
to inform others of the fact that the process is going away.
That happens, for example, for robust futex state cleanup, but also if
the parent has asked for a TID update when the process exits (we clear
the child tid field in user space).
However, at the time we do those final VM accesses, we've already
stopped accepting signals, so the usual "stop waiting for userfaults on
signal" code in fs/userfaultfd.c no longer works, and the process can
become an unkillable zombie waiting for something that will never
happen.
To solve this, just make handle_userfault() abort any user fault
handling if we're already in the exit path past the signal handling
state being dead (marked by PF_EXITING).
This VM special case is pretty ugly, and it is possible that we should
look at finalizing signals later (or move the VM final accesses
earlier). But in the meantime this is a fairly minimally intrusive fix.
Reported-and-tested-by: Dmitry Vyukov <[email protected]>
Acked-by: Andrea Arcangeli <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
In amdgpu_connector_hotplug(), we need to start DP link
training only after we have received DPCD. The function
amdgpu_atombios_dp_get_dpcd() returns non-zero value only
when an error condition is met, otherwise returns zero.
So in case the function encounters an error, we need to
skip rest of the code and return from amdgpu_connector_hotplug()
immediately. Only when we are successfull in reading DPCD
pin, we should carry on with turning-on the monitor.
Signed-off-by: Arindam Nath <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
This code path is not currently enabled now that we properly
respect the vce pg flags, so uncomment the actual pg calls
so the code is as it should be we are eventually able to
enable vce pg.
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Rex Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
If we don't disable it when vce is not in use, we use extra power
if vce pg is disabled.
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Rex Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
with this event, powerplay can adjust current power state if needed.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
This is needed to init the dynamic states without a display. To be
used in the next commit.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again. In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
On CI, we need to see if the number of crtcs changes to determine
whether or not we need to upload the mclk table again. In practice
we don't currently upload the mclk table again after the initial load.
The only reason you would would be to add new states, e.g., for
arbitrary mclk setting which is not currently supported.
Acked-by: Jordan Lazare <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
We don't want side effects. If something fails, we rollback vq->is_le to
its previous value.
Signed-off-by: Greg Kurz <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Looks like a copy-paste bug. The value is used as an optimization and a
wrong value probably isn't causing any serious damage. Found when
porting this code to Windows.
Signed-off-by: Ladi Prosek <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
vmx.c writes the TSC_MULTIPLIER field in vmx_vcpu_load, but only when a
vcpu has migrated physical cpus. Record the last value written and
update in vmx_vcpu_load on any change, otherwise a cpu migration must
occur for TSC frequency scaling to take effect.
Cc: [email protected]
Fixes: ff2c3a1803
Signed-off-by: Owen Hofmann <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Returning directly whatever copy_to_user(...) or copy_from_user(...)
returns may not do the right thing if there's a pagefault:
copy_to_user/copy_from_user return the number of bytes not copied in
this case, but ioctls need to return -EFAULT instead.
Fix up kvm on mips to do
return copy_to_user(...)) ? -EFAULT : 0;
and
return copy_from_user(...)) ? -EFAULT : 0;
everywhere.
Cc: [email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
The MC74xx and EM74xx modules use different IDs by default, according
to the Lenovo EM7455 driver for Windows.
Cc: <[email protected]>
Signed-off-by: Bjørn Mork <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
During DRAM initialization on certain ASpeed devices, an incorrect
bit (bit 10) was checked in the "SDRAM Bus Width Status" register
to determine DRAM width.
Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05.
Signed-off-by: Timothy Pearson <[email protected]>
Cc: [email protected]
Signed-off-by: Dave Airlie <[email protected]>
has written.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW09boAAoJEEhZKYFQ1nG7CosH/jpLN6ulu+VQQ+EhZuotViCA
9+rKPUQfdh+Vp0w72nil1YiIYIfHazSR0srP7M4/KPAy2C7+5jeu7urHMk2sbLzG
ud7uHQVeo+zfPEs2PBG/UDFbvDoyFXnB0iGg4e4PGKXv4yDlTuSS8mCYOyC1T2mF
+4WfAyy+Y35B75SonK/p8s4LQzRGQier6pguLFRPzo19W3g68GfF2zJTW3wXU+0H
37pKcYvrHixPc43oknEADJNdaB9PD6FoJ46jDefBhIK9HQSaDDjB2XxkStLXVtij
zclTaEbtxvI0Ch1mDrCwqCZ7TuNrRjX8i8Wb5F1qnQFO9BUvdYiYIUtkU4KWEYo=
=v5pE
-----END PGP SIGNATURE-----
Merge tag 'usb-ci-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus
Peter writes:
One bug-fix using ID wakeup, this bug is existed once this driver
has written.
Pull d_inode/d_flags race fix from Al Viro.
I love this fix. Not only does it fix the race in the dentry type
handling, it entirely gets rid of the nasty and subtle memory ordering
rules for d_type and d_inode, and replaces them with the basic dentry
locking rules (sequence numbers under RCU, d_lock elsewhere).
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use ->d_seq to get coherency between ->d_inode and ->d_flags
