Add code to update dev value in tsens struct which
will be compared in thermal framework to check whether
the device pointer is matching with thermal zone or not.
Change-Id: Ic7605034e48585bcb25641306c1703b8399b4e0e
Signed-off-by: Ajay Prathi <[email protected]>
Update interrupt names to have "flash" prefix so that all the
interrupts for flash LED can be monitored easily.
Change-Id: Ib7c17ea48110461823702c8d11b7554ddebbbb26
Signed-off-by: Subbaraman Narayanamurthy <[email protected]>
Widgets power up/down sequence in dapm is specific
to platform. Change makes msm specific changes to the
sequence.
Change-Id: I5b501b5dc1b167e339c95fbbc7b5fc72dc9bdb89
Signed-off-by: Gopikrishnaiah Anandan <[email protected]>
Signed-off-by: Banajit Goswami <[email protected]>
Signed-off-by: Sudheer Papothi <[email protected]>
The command in init.qcom.rc to load CVP firmware will take
effect with this change.
Change-Id: Ib45c77c8f34a12a9c01b462847cf2fc25ae1452d
Signed-off-by: George Shen <[email protected]>
Due to an error in the specification of the multiple compatible strings
in the match table, nodes defined with compatible string "adc-tm5-iio"
failed to probe. Fix this.
Also change the compilation recipe in the Makefile to prevent generation
of multiple kernel modules.
Change-Id: I6cf544b202dfb0773215aeaeae8a12bae5b79dde
Signed-off-by: Guru Das Srinagesh <[email protected]>
Codec should be started before the CPU to ensure that there is no data
loss during playback.Current sequence enables the CPU first followed by
codec.This change updates the sequence prevent any playback data loss.
Also, squash the below change to fix possible NULL pointer dereference
issue
ASoC: pcm: Check for capture path in all codec_dais
During soc_pcm_prepare, check for capture path for all
the codec_dais instead of the last codec_dai. This is
will help to set pcm start event for all the codec dais
that has capture_active set to high. Change checks for
all the codec_dais capture_active bit to set start stream
event.
Change-Id: I3f1b457ecd169f6ecc42e15f2151ede9cdbd580d
Signed-off-by: Gopikrishnaiah Anandan <[email protected]>
Signed-off-by: Banajit Goswami <[email protected]>
Signed-off-by: Sudheer Papothi <[email protected]>
Signed-off-by: Meng Wang <[email protected]>
Add the support necessary to allow secure allocations for the
TUI VMID with R/W permissions.
Change-Id: I7486d75b3d9d3f7fa29a8d4972cca671d55b3569
Signed-off-by: Isaac J. Manjarres <[email protected]>
Add support for assigning memory to the TUI VMID.
Change-Id: Idbd8e144d7251335ba1db5bfdad7fa94394da7e5
Signed-off-by: Isaac J. Manjarres <[email protected]>
Casting the comparison function to a different type trips indirect call
Control-Flow Integrity (CFI) checking. Remove the additional consts from
cmp_func, and the now unneeded casts.
Change-Id: Ie21cfb8bbc75632e4d96b44cf3f0c3d3331d7fa0
Fixes: 043b3f7 ("lib/list_sort: simplify and remove MAX_LIST_LENGTH_BITS")
Signed-off-by: Sami Tolvanen <[email protected]>i
Git-commit: 5bc3f3591d783484b2e0011f3b5633c1e60e7585
Git-repo: https://github.com/samitolvanen/linux.git
Signed-off-by: Prakruthi Deepak Heragu <[email protected]>
There is already a qcrypto module defined in drivers/crypto/qce so
rename this one to qcrypto-msm to avoid an error while building with
'allmodconfig'.
Change-Id: Ic0dedbadb33e28eccd952c6f9c01c8b8208ad2ec
Signed-off-by: Jordan Crouse <[email protected]>
qcedev.c and qcedev_smmu.c are clearly not expected to be compiled
as separate modules so bundle them together as one.
Change-Id: Ic0dedbad96baebac00448edf4cf440d1e0edd41c
Signed-off-by: Jordan Crouse <[email protected]>
Fix an out of order definition of MODULE_DEVICE_TABLE, add missing
brackets to fix a suspect indentation warning and mark an
implcit switch fall through.
Fixes: 377c69bf3e ("crypto: msm: Add QTI crypto drivers")
Change-Id: Ic0dedbada33fd2e5c692e5f0d64fd0e7b7afb5f1
Signed-off-by: Jordan Crouse <[email protected]>
Fix the following warning from gcc 7.4.1 with -Werror enabled:
drivers/crypto/msm/qce50.c:4668:28: error: ‘~’ on a boolean expression
[-Werror=bool-operation]
pce_dev->cadence_flag = ~pce_dev->cadence_flag;
drivers/crypto/msm/qce50.c:4668:28: note: did you mean to use logical not?.
Fixes: 377c69bf3e ("crypto: msm: Add QTI crypto drivers")
Change-Id: Ic0dedbad73c49d059d68d9412009b74583d33154
Signed-off-by: Jordan Crouse <[email protected]>
This reverts commit 5f563b2c24.
FSA config will be enabled after all dependent changes are merged.
Change-Id: I585fd44abe2210b6a9dc572c5dcd1b6ce426b9d8
Signed-off-by: Meng Wang <[email protected]>
Add and modify files to enable hdcp_qseecom driver
for Lahaina.
This implementation is based on a snapshot of the HDCP
QSEECOM module as of this commit c13c06fa4bc677f4
("hdcp_qseecom: Maintain repeater_flag appropriately")
on kernel-4.19.
Change-Id: I91a9d9c539f5ab11af7f427e907622d8391b454f
Signed-off-by: Phanindra Babu Pabba <[email protected]>
Updating the zone watermarks by any means, like extra_free_kbytes,
min_free_kbytes, water_mark_scale_factor, when boost_watermark(zone) is
set can result into the higher water_mark_low|min as the macro
min_wmark_pages returns by adding the zone->watermark_boost.
Set this to Zero early.
Change-Id: I5e3edd1798e46974f3df34ef750f9d08b8ff35f4
Signed-off-by: Charan Teja Reddy <[email protected]>
Signed-off-by: Chris Goldsworthy <[email protected]>
Rely on LMK to reclaim memory and avoid OOM, when out of memory
condition is detected in a pagefault.
pagefault_out_of_memory() may be called due to commit d1b75390beb8 ("mm:
reduce the time spend by killed tasks in alloc path"), which bails out from
alloc_pages_slowpath() if the current task has been killed.
Change-Id: Icfdaa51d7cfb0dfe9a665bcff23357101b15f421
Signed-off-by: Prakash Gupta <[email protected]>
Signed-off-by: Chris Goldsworthy <[email protected]>
Enable the reaping of memory on a sigkill by default. This helps in
faster releasing of memory pages to buddy.
Change-Id: I90a508e6d16099527991674f6b4efdc55f415c59
Signed-off-by: Charan Teja Reddy <[email protected]>
Signed-off-by: Chris Goldsworthy <[email protected]>
Enable support for a userspace low memory killer and associated
debug options.
Change-Id: If730f1634e39b516e00b29f86260b720c33706d4
Signed-off-by: Chris Goldsworthy <[email protected]>
If a userspace low memory killer is present, the kernel oom killer
is not expected to be invoked. Therefore, trigger a reset on any
such occurrence.
Change-Id: I7f3451e9c4deb843b3e4dfa13e9764101e90b8ae
Signed-off-by: Patrick Daly <[email protected]>
Signed-off-by: Chris Goldsworthy <[email protected]>
While ULMK is active, prevent OOM for order <= COSTLY_ORDER
pages. No special actions are taken for larger orders.
Change-Id: I4ccba1b71155947569acc3d88ae2027e3b2e0620
Signed-off-by: Patrick Daly <[email protected]>
Signed-off-by: Chris Goldsworthy <[email protected]>
Enable CONFIG_EDAC_QGKI flag in non GKI variants to use defer work
feature for EDAC.
Change-Id: I8debaa58d36988a60a346ffdaf8d736abd2384d3
Signed-off-by: Prakruthi Deepak Heragu <[email protected]>
Haven Resource Manager API defines a simple console for VM log sharing.
This patch adds support for this console with the HVC console framework.
It is possible to use this driver as the "primary VM" to listen to other
VM console logs or as the "secondary VM" to send logs to the "primary
VM". For the latter, CONFIG_HVC_HAVEN_CONSOLE must be set to y.
Change-Id: I3606b2d373535d0f347f66e5b729a303a9513fa8
Signed-off-by: Elliot Berman <[email protected]>
Add console APIs to emulate virtual console mechanism between SVM and
PVM to get the SVM messages to PVM for debug purpose.
Change-Id: I24ec2c427460195c83f5975de70f4ec5c4f2f763
Signed-off-by: Elliot Berman <[email protected]>
