TX_CDC_DMA_TX_0 supports three channels, therefore it
can be used for rx_macro_echo. Add required backend dailink.
Also remove AMIC4 from ignore_suspend as it is not used for talos.
Change-Id: I74b7adca9fa4001866232c1a9173e865c2a169c4
Signed-off-by: Vatsal Bucha <[email protected]>
Correct name of widgets for tx macro from
TX SWR_MIC to TX SWR_DMIC. Also assign codec pointer
to rx_priv before calling rx_macro_init_bcl_pmic_reg.
Change-Id: I268d79413c53bcd2d8e7a391859b71b7a7e3f64e
Signed-off-by: Vatsal Bucha <[email protected]>
Add mixer control and routing to enable echo reference
for rx_macro.
Change-Id: Ic1095eaa8024f2cb61722609daae94bc645b263b
Signed-off-by: Vatsal Bucha <[email protected]>
Mono headsets have only one channel connected. Hence make cross
connection decision based on the voltage result of alteast one
channel showing cross connection.
Change-Id: I22a4ea7e25d09e785e7141f4a74c2830fdff555e
Signed-off-by: Ramprasad Katkam <[email protected]>
Update QUAT and QUIN TDM slot configuration
and mapping information for A2B support.
Change-Id: I17a4019f961846477f880cb2a59bc4c8f4c2fe28
Signed-off-by: Derek Chen <[email protected]>
To support 16 channel audio playback 8 codecs are needed.
Update cluster device table to support this number of
codecs.
Change-Id: I1ab3283b3174357b8b6647662c4519e5dca4bb97
Signed-off-by: Dieter Luecking <[email protected]>
Update the register names and default values to
be same as the software document of codec.
CRs-Fixed: 2334177
Change-Id: Iec3ce76dceb44cef64c1f38a6cd75cb40ee2a539
Signed-off-by: Tanya Dixit <[email protected]>
Handle PDM watchdog interrupt. Enable watchdog
before analog PA is enabled and disable it
after analog PA is disabled so as to prevent false alarms.
CRs-Fixed: 2336526
Change-Id: I3c16a9dcd0f4f84bf8ad0bfde9560330c143cdf9
Signed-off-by: Vatsal Bucha <[email protected]>
Reduce the amount of time driver waits to get a response from ADSP.
Current wait time in some cases is 5 secconds, which might cause
user space crashes in Android P. So reducing the timeout to
1 second.
CRs-Fixed: 2318751
Change-Id: I6b6789aa5b408659dd57f8f6b017df52d14b28aa
Signed-off-by: Vignesh Kulothungan <[email protected]>
Do not disable wake irq during registration of
wake up interrupt as it leads to multiple disable
calls of wake irq during boot up and headset detection
fails sometimes.
CRs-Fixed: 2356299
Change-Id: I79aa0ab46d26dc0e352d399e0d4381a11ed936f4
Signed-off-by: Aditya Bavanari <[email protected]>
MICBIAS is always set to 1.8V. Change this voltage
depending on dt value for respective micbias.
Change-Id: I8eb1e71ae0256423bfd0bcc8ba2cd6bcc4a5ee61
Signed-off-by: Vatsal Bucha <[email protected]>
In new class-H driver used for tanggu or later variants,
use LP(low power) power setting for CLS_H_LOHIFI same
as tavil codec.
Change-Id: I6a0f6e6d39e5704d6ea429ae2f3698750b7ea487
Signed-off-by: Laxminath Kasam <[email protected]>
In SSR/PDR, return ENETRESET errno to
propagate this failure to userspace. After
audio HAL receives ENETRESET, it stops retry
for pcm_open continuously. Rate limit the logs
when apr send packet fails during PDR/SSR
usecases to avoid watchdog timeouts.
Change-Id: I03a80aef6ffedb4f15f953fff5213d6a3c9efc4b
Signed-off-by: Laxminath Kasam <[email protected]>
Add FE dialinks to enable multi compress capture
sessions on sm6150 target.
Change-Id: Ib26fc6c84d7993c34725a3b67596d4f059aa286e
Signed-off-by: Md Mansoor Ahmed <[email protected]>
Dmesg logs are getting flooded with WSA temparature
logs. Change the log level to pr_debug to get rid
of this messages.
Change-Id: Ia4ccca47c5e6e5d56883ff73e1ae4278ff855be3
Signed-off-by: Surendar Karka <[email protected]>
If the optional commands/registers in soundwire slave(s) are not
implemented, then soundwire bus will ignore the corresponding
commands and executes the next commands in queue.
Change-Id: I24dd929975218a150717f03f5c17c2be173a5005
Signed-off-by: Sudheer Papothi <[email protected]>
Send the kona platform specific soundwire port configuration
to the soundwire master driver through machine driver.
Change-Id: I1144d00b6bd430f330833141e681dcc93bfff9d2
Signed-off-by: Karthikeyan Mani <[email protected]>
Add common front end and back end dais.
Add TDM, AUX PCM and MI2S dais.
Change-Id: I3ecbe10ea9246aadedd02a881c937ce69f33cbbe
Signed-off-by: Vignesh Kulothungan <[email protected]>
Update symbolic link for internal.h, core.h and pinctrl-utils.h for kona.
Change-Id: I3bb585700a531e97a0b1b163b191105628f3d22c
Signed-off-by: Meng Wang <[email protected]>
VA macro is currently lacking capability to dynamically select
MCLK on Kona. Add support in VA macro driver to read MUX select
property from DT to enable dynamic MCLK MUX select.
Change-Id: I46d0b760119a2d8c2ed754ae9cb43ba717fa300b
Signed-off-by: Xiaoyu Ye <[email protected]>
Existing soundwire master controller driver uses static tables
directly for soundwire port configuration. But, this is not
scalable to add support for new targets. So, define platform
specific soundwire master port configuration from machine driver.
Change-Id: I37d499c77914b413e6e16ab2689dbaae8fcd194c
Signed-off-by: Sudheer Papothi <[email protected]>
Add support to get the platform specific soundwire port configuration
for soundwire master ports.
Change-Id: Ie1d32a77d534f6c3f397936b85c025b14d01f321
Signed-off-by: Sudheer Papothi <[email protected]>
Different platforms have different configuration for soundwire
ports. Add support to get the port configuration information
from the machine driver.
Change-Id: If2c006c4d4a43e2a8dc67c076f6d1c0f36eae16b
Signed-off-by: Sudheer Papothi <[email protected]>
