The driver was having some issues with false Tx hang detection. This
makes the driver a little more direct with the checks for progress
forward by directly checking the head write back address and tail register
when determining progress. This avoids Tx hangs where the software
gets behind, because we are directly checking hardware state when
determining hang state.
Change-ID: I774f0e861c9e8ab5ccb213634100fe15440ae24a
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The hardware has some limitations the driver needs to adhere to,
that we found in extended testing.
1) no more than 8 descriptors per packet on the wire
2) no header can span more than 3 descriptors
If one of these events occurs, the hardware will generate an internal
error and freeze the Tx queue.
This patch linearizes the skb to avoid these situations.
Change-ID: I37dab7d3966e14895a9663ec4d0aaa8eb0d9e115
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch adds check to bail out if device is already down when checking
for Tx hang subtask.
Change-ID: I3853fb7a6d11cb9a4c349b687cb25c15b19977a0
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Add parens to make sure the shift and bitwise precedences don't work backwards
for us.
Change-ID: I60c10ef4fad6bc654522b9d8a53da2e270a0f268
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The patch fixes a leak of 'cmd_buf' when copy_from_user() failed
in i40e_dbg_command_write().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The hardware folks told me that for page clearing "when you exactly
know what to do, hand written xc+pfd is usally faster then mvcl for
page clearing, as it saves millicode overhead and parameter parsing
and checking" as long as you dont need the cache bypassing.
Turns out that gcc already does a proper xc,pfd loop.
A small test on z196 that does
buff = mmap(NULL, bufsize,PROT_EXEC|PROT_WRITE|PROT_READ,AP_PRIVATE| MAP_ANONYMOUS,0,0);
for ( i = 0; i < bufsize; i+= 256)
buff[i] = 0x5;
gets 20% faster (touches every cache line of a page)
and
buff = mmap(NULL, bufsize,PROT_EXEC|PROT_WRITE|PROT_READ,AP_PRIVATE| MAP_ANONYMOUS,0,0);
for ( i = 0; i < bufsize; i+= 4096)
buff[i] = 0x5;
is within noise ratio (touches one cache line of a page).
As the clear_page is usually called for first memory accesses
we can assume that at least one cache line is used afterwards,
so this change should be always better.
Another benchmark, a make -j 40 of my testsuite in tmpfs with
hot caches on a 32cpu system:
-- unpatched -- -- patched --
real 0m1.017s real 0m0.994s (~2% faster, but in noise)
user 0m5.339s user 0m5.016s (~6% faster)
sys 0m0.691s sys 0m0.632s (~8% faster)
Let use the same define to memset as the asm-generic variant
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Make sure that even in error situations we do not use copy_to_user
on uninitialized kernel memory.
Cc: stable@vger.kernel.org # 3.19+
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We increase the msb_count after we're finished building the request.
That way we can always access the current request via
scmrq->request[msb_count] . But once the request is started we need
to make sure that the array index stays below msb_count.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix the output of the jump label sanity check and also print the
code pattern that is supposed to be written to the jump label.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
omapdss's sysfs directories for displays used to have 'name' file,
giving the name for the display. This file was later renamed to
'display_name' to avoid conflicts with i2c sysfs 'name' file. Looks like
at least xserver-xorg-video-omap3 requires the 'name' file to be
present.
To fix the regression, this patch creates new kobjects for each display,
allowing us to create sysfs directories for the displays. This way we
have the whole directory for omapdss, and there will be no sysfs file
clashes with the underlying display device's sysfs files.
We can thus add the 'name' sysfs file back.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: NeilBrown <neilb@suse.de>
we were dereferencing edid first and the NULL check was after
accessing that. now we are using edid only if we know that
it is not NULL.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This patch add a missing check on the return value of devm_kzalloc,
which would cause a NULL pointer dereference in a OOM situation.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This patch fixes faulty behaviour in a setup where the input clock for the
SRG is fed through the CLKR/CLKX pin but the McBSP is configured to be
master (SND_SOC_DAIFMT_CBS_CFS). In that case of course CLKR/CLKX must
not be configured as output pin. Otherwise the input clock is messed up
horribly.
This patch makes it possible to use the CLKR/CLKX pin rather than CLKS to
inject a reference clock in setups where McBSP is master and not both
rx and tx are used. However for this to work it has to be ensured that
set_dai_sysclk() is called after set_dai_fmt().
This was tested on a beagleboard-xm using McBSP1 to drive a i2s DAC through
the tx lines (CLKX,FSX,DX). Using this patch the CLKR pin is used to inject
an external reference clock.
Signed-off-by: Thomas Niederprüm <niederp@physik.uni-kl.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Additionally to the current DMA transfer the PDC allows to set up a next DMA
transfer. This is useful for larger SPI transfers.
The driver currently waits for ENDRX as end of the transfer. But ENDRX is set
when the current DMA transfer is done (RCR = 0), i.e. it doesn't include the
next DMA transfer.
Thus a subsequent SPI transfer could be started although there is currently a
transfer in progress. This can cause invalid accesses to the SPI slave devices
and to SPI transfer errors.
This issue has been observed on a hardware with a M25P128 SPI NOR flash.
So instead of ENDRX we should wait for RXBUFF. This flag is set if there is
no more DMA transfer in progress (RCR = RNCR = 0).
Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The commit d297933cc7 (spi: dw: Fix detecting FIFO depth) tries to fix the
logic of the FIFO detection based on the description on the comments. However,
there is a slight difference between numbers in TX Level and TX FIFO size.
So, by specification the FIFO size would be in a range 2-256 bytes. From TX
Level prospective it means we can set threshold in the range 0-(FIFO size - 1)
bytes. Hence there are currently two issues:
a) FIFO size 2 bytes is actually skipped since TX Level is 1 bit and could be
either 0 or 1 byte;
b) FIFO size is incorrectly decreased by 1 which already done by meaning of
TX Level register.
This patch fixes it eventually right.
Fixes: d297933cc7 (spi: dw: Fix detecting FIFO depth)
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The patch corrects the routing paths of that after IF1/2 DACx Mux
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the parent device so that udev can show the full hierarchy. This avoids
the device showing up under /devices/virtual/input instead of the i2c bus
it is actually attached to.
Signed-off-by: Stefan Sauer <ensonic@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The IRQF_NO_SUSPEND flag is intended to be used for interrupts required
to be enabled during the suspend-resume cycle. This mostly consists of
IPIs and timer interrupts, potentially including chained irqchip
interrupts if these are necessary to handle timers or IPIs. If an
interrupt does not fall into one of the aforementioned categories,
requesting it with IRQF_NO_SUSPEND is likely incorrect.
Using IRQF_NO_SUSPEND does not guarantee that the interrupt can wake the
system from a suspended state. For an interrupt to be able to trigger a
wakeup, it may be necessary to program various components of the system.
In these cases it is necessary to use {enable,disabled}_irq_wake.
Unfortunately, several drivers assume that IRQF_NO_SUSPEND ensures that
an IRQ can wake up the system, and the documentation can be read
ambiguously w.r.t. this property.
This patch updates the documentation regarding IRQF_NO_SUSPEND to make
this caveat explicit, hopefully making future misuse rarer. Cleanup of
existing misuse will occur as part of later patch series.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-02-24
This series contains updates to i40e and i40evf only, which bumps their
versions to i40e 1.2.9 and i40evf 1.2.3.
Paul fixes i40e_debug_aq() for big endian machines by adding the
appropriate LExx_TO_CPU wrappers.
Catherine adds a requested speed variable to the link_status to store the
last speeds we requested from the firmware and use the advertised speed
settings in get_settings in ethtool now that we have it. Due to the
new code addition, she also refactors get_settings to improve readability
and to accommodate some of the longer lines of code by adding two
functions i40e_get_settings_link_up() and i40e_get_settings_link_down().
Carolyn adds a struct to the VSI struct to keep track of RXNFC settings
done via ethtool. Adds more information to the interrupt vector
names, specifically to the VF misc vector name so that we can distinguish
between all the interrupts.
Ashish enables the i40evf driver to enable debug prints via ethtool.
Mitch updates i40e to enable packet split only when IOMMU is in use,
since it shows a distinct advantage over the single-buffer path
because it minimizes DMA mapping and unmapping. Also adds the receive
routine in use to the features log message to be able to print the
receive packet split status.
Greg adds the ability to get, set and commit permanently the NPAR
partition BW configuration through configfs. Enables an application
to query the i40e driver's private flags to get the status of NPAR
enablement via ethtool.
Neerav adds support for bridge offload ndo_ops getlink and setlink
to enable bridge hardware mode as per the mode set via IFLA_BRIDGE_MODE.
The support is only enabled in the case of a PF VSI and not available for
any other VSI type.
Kevin fixes i40e by ensuring the BUF and FLAG_RD flags are set for
indirect admin queue command.
Vasu updates the driver to setup FCoE netdev device type as "fcoe", so that
it shows up in sysfs as FCoE device.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To avoid race conditions when using the ds->ports[] array,
we need to check if the accessed port has been initialized.
Introduce and use helper function dsa_is_port_initialized
for that purpose and use it where needed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
net: dsa: integration with SWITCHDEV for HW bridging
This patch set provides the DSA and SWITCHDEV integration bits together and
modifies the bcm_sf2 driver accordingly such that it works properly with HW
bridging.
Changes in v3:
- add back the null pointer check in dsa_slave_br_port_mask from Guenter
- slightly rework patch 1 commit message not to mention the function name
we add in patch 2
Changes in v2:
- avoid a race condition in how DSA network devices are created, patch from
Guenter Roeck
- provide a consistent and work STP state once a port leaves the bridge
- retain a bridge device pointer to properly flag port/bridge membership
- properly flush the ARL (Address Resolution Logic) in bcm_sf2.c
- properly retain port membership when individually bringing devices up/down
while they are members of a bridge
We discussed on the mailing-list the possibility of standardizing a "fdb_flush"
operation for DSA switch drivers, looking at the Marvell and Broadcom switches,
I am not convinced this is practical or diserable as the terminologies vary
here, but there is nothing preventing us from doing it later.
Many thanks to Guenter and Andrew for both testing and providing feedback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the bridge join, leave and set_stp callbacks by making that
we do the following:
- when a port joins the bridge, all existing ports in the bridge get
their VLAN control register updated with that joining port
- the joining port is including all existing bridge ports in its own
VLAN control register
The leave operation is fairly similar, special care must be taken to
make sure that port leaving the bridging is not removing itself from its
own VLAN control register.
Since the various BR_* states apply directly to our HW semantics, we
just need to translate these constants into their corresponding HW
settings, and voila!
We make sure to trigger a fast-ageing process for ports that are
joining/leaving the bridge and transition from incompatible states, this
is equivalent to triggering an ARL flush for that port.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to support bridging offloads in DSA switch drivers, select
NET_SWITCHDEV to get access to the port_stp_update and parent_get_id
NDOs that we are required to implement.
To facilitate the integratation at the DSA driver level, we implement 3
types of operations:
- port_join_bridge
- port_leave_bridge
- port_stp_update
DSA will resolve which switch ports that are currently bridge port
members as some Switch hardware/drivers need to know about that to limit
the register programming to just the relevant registers (especially for
slow MDIO buses).
We also take care of setting the correct STP state when slave network
devices are brought up/down while being bridge members.
Finally, when a port is leaving the bridge, we make sure we set in
BR_STATE_FORWARDING state, otherwise the bridge layer would leave it
disabled as a result of having left the bridge.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
A network device notifier can be called for one or more of the created
slave devices before all slave devices have been registered. This can
result in a mismatch between ds->phys_port_mask and the registered devices
by the time the call is made, and it can result in a slave device being
added to a bridge before its entry in ds->ports[] has been initialized.
Rework the initialization code to initialize entries in ds->ports[] in
dsa_slave_create. With this change, dsa_slave_create no longer needs
to return slave_dev but can return an error code instead.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
I have been signing off on patches with this address so I'll change it.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PHY requires different settings for the Decision Feedback Analyzer
(DFE) when running in KX mode vs. KR mode. Update the code to change
these settings when changing modes in order to provide a more stable
link.
Additionally, adjust the 10GbE PQ skew default setting to a more sane
value.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We were enabling DP secondary streams even if the monitor
didn't support them. Fixes display problems on some DP
monitors.
Tested-by: Jim Boz <jim876@xs4all.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The atom aux param interface only supports 4 bits for
the total write transfer size (header + payload). This
limits us to 12 bytes of payload rather than 16. Add a
check for this. Reads are not affected.
v2: switch to WARN_ON_ONCE
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The logic was reversed from what the hw actually exposed.
Fixes graphics corruption in certain harvest configurations.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Dump the whole IB if we run into an invalid packet.
This makes things much easier to debug.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=89148
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit b7bc596ebb ("drm/radeon: disable native
backlight control on pre-r6xx asics (v2)") accidently
broke backlight control on old mac laptops that use the
on-GPU backlight controller.
Signed-off-by: Nathan-J. Hirschauer <nathanhi@deepserve.info>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The recent build changes cause perf to not compile for sparc64 since the
arch/sparc64/Build file does not exist:
/home/dahern/kernels/linux.git/tools/build/Makefile.build:40: arch/sparc64/Build: No such file or directory
Fix by converting the sparc64 RAW_ARCH to sparc ARCH -- similar to what
is done for x86_64.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1424306222-96843-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
4886f2ca19 added an arm-64 check, but the EM_AARCH64 macro is not
defined in older releases (e.g., RHEL6). Define if it is not defined.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Link: http://lkml.kernel.org/r/1424306017-96797-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf-top is terminating due to SIGBUS on sparc64. git bisect points to:
commit 8239698603
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Mon Sep 8 13:26:35 2014 -0300
perf evlist: Refcount mmaps
We need to know how many fds are using a perf mmap via
PERF_EVENT_IOC_SET_OUTPUT, so that we can know when to ditch an mmap,
refcount it.
This commit added 'int refcnt' to struct perf_mmap and the addition makes the
event_copy element no longer 8-byte aligned.
Fix by adding __attribute__((aligned(8))) to the event_copy struct
member.
Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1424304198-92028-1-git-send-email-david.ahern@oracle.com
[ Switched from 'int pad;' to using __attribute__, David tested/acked that ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit f6edb53c49 converted the probe to
a CPU wide event first (pid == -1). For kernels that do not support
the PERF_FLAG_FD_CLOEXEC flag the probe fails with EINVAL. Since this
errno is not handled pid is not reset to 0 and the subsequent use of
pid = -1 as an argument brings in an additional failure path if
perf_event_paranoid > 0:
$ perf record -- sleep 1
perf_event_open(..., 0) failed unexpectedly with error 13 (Permission denied)
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.007 MB /tmp/perf.data (11 samples) ]
Also, ensure the fd of the confirmation check is closed and comment why
pid = -1 is used.
Needs to go to 3.18 stable tree as well.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Based-on-patch-by: David Ahern <david.ahern@oracle.com>
Acked-by: David Ahern <david.ahern@oracle.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/54EC610C.8000403@intel.com
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
changes for this set:
- Fix wrong DMA properties for dma to avoid them getting
copied wrong again before we start actually using them
- USB fixes to revert the extcon changes as the driver did not
get merged yet and cause issues
- Omap5 and dra7 fixes to boot from sata
- Fix few am437x issues for i2c and pinctrl
- Fix beaglebone for hardwared USB configuration
- Defconfig changes for NAND, SATA and TPS62362
- Fix n900 i2c numbering for legacy user space and smc91x
register offset so it works also for qemu
- Fix incomplete USB configuration for dm816x
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oG7A
-----END PGP SIGNATURE-----
Merge tag 'fixes-v4.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for various omap devices. It's all dts and defconfig
changes for this set:
- Fix wrong DMA properties for dma to avoid them getting
copied wrong again before we start actually using them
- USB fixes to revert the extcon changes as the driver did not
get merged yet and cause issues
- Omap5 and dra7 fixes to boot from sata
- Fix few am437x issues for i2c and pinctrl
- Fix beaglebone for hardwared USB configuration
- Defconfig changes for NAND, SATA and TPS62362
- Fix n900 i2c numbering for legacy user space and smc91x
register offset so it works also for qemu
- Fix incomplete USB configuration for dm816x
* tag 'fixes-v4.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-bone*: usb0 is hardwired for peripheral
ARM: dts: dra7x-evm: beagle-x15: Fix USB Host
ARM: omap2plus_defconfig: Fix SATA boot
ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver
ARM: dts: dra7: Correct the dma controller's property names
ARM: dts: omap5: Correct the dma controller's property names
ARM: dts: omap4: Correct the dma controller's property names
ARM: dts: omap3: Correct the dma controller's property names
ARM: dts: omap2: Correct the dma controller's property names
ARM: dts: am437x-idk: fix sleep pinctrl state
ARM: omap2plus_defconfig: enable TPS62362 regulator
ARM: dts: am437x-idk: fix TPS62362 i2c bus
ARM: dts: n900: Fix offset for smc91x ethernet
ARM: dts: n900: fix i2c bus numbering
ARM: dts: Fix USB dts configuration for dm816x
ARM: dts: OMAP5: Fix SATA PHY node
ARM: dts: DRA7: Fix SATA PHY node
Commit 5d425c1865 ("arm64: kernel: add support for cpu cache
information") adds cacheinfo support for ARM64. Since there's no
architectural way of detecting the cpus that share particular cache,
device tree can be used and the core cacheinfo already supports the
same.
This patch adds the L2 cache topology on Juno board, FVP/RTSM and
foundation models.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Feature detection for pthread_attr_setaffinity_np was failing, producing
this error:
In file included from bench/futex-hash.c:17:0:
bench/futex.h:73:19: error: conflicting types for ‘pthread_attr_setaffinity_np’
static inline int pthread_attr_setaffinity_np(pthread_attr_t *attr,
^
In file included from bench/futex.h:72:0,
from bench/futex-hash.c:17:
/usr/include/pthread.h:407:12: note: previous declaration of ‘pthread_attr_setaffinity_np’ was here
extern int pthread_attr_setaffinity_np (pthread_attr_t *__attr,
^
make[3]: *** [bench/futex-hash.o] Error 1
make[2]: *** [bench] Error 2
make[2]: *** Waiting for unfinished jobs....
This was because compiling test-pthread-attr-setaffinity-np.c
failed due to the function arguments:
test-pthread-attr-setaffinity-np.c: In function ‘main’:
test-pthread-attr-setaffinity-np.c:11:2: warning: null argument where non-null required (argument 3) [-Wnonnull]
ret = pthread_attr_setaffinity_np(&thread_attr, 0, NULL);
^
So fix the arguments.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1424774766-24194-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The man page for pthread_attr_set_affinity_np states that _GNU_SOURCE
must be defined before pthread.h is included in order to get the proper
function declaration. Define this in the Makefile.
Without this defined, the feature check fails on a Fedora system with
gcc5 and then the perf build later fails with conflicting prototypes for
the function.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/20150211162404.GA15522@hansolo.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull clockevents driver fixes from Daniel Lezcano:
- Fix the Kconfig to prevent the asm9260 timer to be compiled with
allyesconfig with sparc/sparc64 (Daniel Lezcano)
- Reorder the mtk driver init sequence in order to prevent a potential race
when the clock is registered before the irq handler is set (Matthias Brugger)
- Fix a section mismatch for the pxa driver (Robert Jarzmik)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As pxa_timer_common_init() is only called in init context, mark it as
such, and quiesce the compiler warnings :
WARNING: vmlinux.o(.text.unlikely+0x45d4): Section mismatch in reference
from the function pxa_timer_common_init() to the function
.init.text:sched_clock_register()
WARNING: vmlinux.o(.text.unlikely+0x4610): Section mismatch in reference
from the function pxa_timer_common_init() to the function
.init.text:clocksource_mmio_init()
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We have two race conditions in the probe code which could lead to a null
pointer dereference in the interrupt handler.
The interrupt handler accesses the clockevent device, which may not yet be
registered.
First race condition happens when the interrupt handler gets registered before
the interrupts get disabled. The second race condition happens when the
interrupts get enabled, but the clockevent device is not yet registered.
Fix that by disabling the interrupts before we register the interrupt and enable
the interrupts after the clockevent device got registered.
Reported-by: Gongbae Park <yongbae2@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The Kconfig options for the asm9260 timer is wrong as it can be selected by
another platform with allyes config and thus leading to a compilation failure
as some non arch related code is pulled by the compilation.
Fix this by having the platform Kconfig to select the timer as it is done for
the others drivers.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Oleksij Rempel <linux@rempel-privat.de>
Conflicts:
drivers/clocksource/Kconfig
