Add sync_state functionality to remove threshold held during initial
boot up and clean up any linger proxy resources that were voted for
from bootloaders.
Change-Id: I8926c80e522a4980a1d3f6f40916f223231e7f58
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Utility factor needs to be applied for aggregated bandwidth
so as to run the bus clock at required frequency.
Change-Id: Ic166f72b0719fa88db4c04b9acdc163483faf538
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Add sync_state functionality to remove threshold held
during initial boot up and clean up any linger proxy
resources that were voted for from bootloaders.
Change-Id: Icb9758075fa2af8f3bb658e8a4b033b213e16545
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Introduce an interconnect L3 driver to set L3 performance
states.
Change-Id: I31b73332429744fe2f04a2d9aa66f7972bbba7c1
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Add USB3 master so that client can vote for bandwidth
on Holi.
Change-Id: I37661eda4febdff619a703f423aca957f91347b5
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Introduce Qualcomm Holi specific provider driver using the
interconnect framework.
Change-Id: I428bd3260c00f5c0e02d37d81935b55badd81305
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
Add SDC1 master port as it is for client to request
the bandwidth.
Change-Id: Ib459a6f156df05f088c0ec5a58b6dbb73cb39a5f
Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
This reverts commit 6ed237072e.
and make icc-rpmh work as a module.
Change-Id: Ib002f15eda6a9ccfe5ef053195d6b485c99db2a6
Signed-off-by: Mukesh Ojha <mojha@codeaurora.org>
Since clk_bulk_prepare_enable function is defined with __must_check option,
add check to return status of clk_bulk_prepare_enable in qcom_icc_set
function.
Change-Id: I69fed5bdda38edfa89af3d899333d6e6f9f939f9
Signed-off-by: Naveen Yadav <naveenky@codeaurora.org>
Update the bcm_div function to use do_div() to prevent compiler
from generating undefined reference to `__aeabi_uldivmod' warnings
on 32bit architecture.
Change-Id: Iba37b5f286e76b0ce903b6e0e0344e9659b0004f
Signed-off-by: Naveen Yadav <naveenky@codeaurora.org>
* refs/heads/tmp-0d3cca0c:
UPSTREAM: driver core: Skip unnecessary work when device doesn't have sync_state()
Linux 5.4.26
net/smc: cancel event worker during device removal
net/smc: check for valid ib_client_data
ipv6: restrict IPV6_ADDRFORM operation
iommu/amd: Fix IOMMU AVIC not properly update the is_run bit in IRTE
i2c: acpi: put device when verifying client fails
iommu/vt-d: Ignore devices with out-of-spec domain number
iommu/vt-d: Fix the wrong printing in RHSA parsing
netfilter: nft_chain_nat: inet family is missing module ownership
netfilter: nf_tables: dump NFTA_CHAIN_FLAGS attribute
netfilter: nft_tunnel: add missing attribute validation for tunnels
netfilter: nft_payload: add missing attribute validation for payload csum flags
netfilter: cthelper: add missing attribute validation for cthelper
perf bench futex-wake: Restore thread count default to online CPU count
nl80211: add missing attribute validation for channel switch
nl80211: add missing attribute validation for beacon report scanning
nl80211: add missing attribute validation for critical protocol indication
i2c: gpio: suppress error on probe defer
iommu/vt-d: Fix RCU-list bugs in intel_iommu_init()
driver code: clarify and fix platform device DMA mask allocation
drm/i915/gvt: Fix unnecessary schedule timer when no vGPU exits
pinctrl: core: Remove extra kref_get which blocks hogs being freed
drm/i915/gvt: Fix dma-buf display blur issue on CFL
virtio_ring: Fix mem leak with vring_new_virtqueue()
pinctrl: imx: scu: Align imx sc msg structs to 4
pinctrl: meson-gxl: fix GPIOX sdio pins
clk: imx8mn: Fix incorrect clock defines
batman-adv: Don't schedule OGM for disabled interface
iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge page
iommu/vt-d: Fix RCU list debugging warnings
iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taint
iommu/dma: Fix MSI reservation allocation
x86/mce: Fix logic and comments around MSR_PPIN_CTL
perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag
mt76: fix array overflow on receiving too many fragments for a packet
i2c: designware-pci: Fix BUG_ON during device removal
efi: Add a sanity check to efivar_store_raw()
efi: Fix a race and a buffer overflow while reading efivars via sysfs
x86/ioremap: Map EFI runtime services data as encrypted for SEV
macintosh: windfarm: fix MODINFO regression
fscrypt: don't evict dirty inodes after removing key
blk-iocost: fix incorrect vtime comparison in iocg_is_idle()
ipmi_si: Avoid spurious errors for optional IRQs
s390/dasd: fix data corruption for thin provisioned devices
fuse: fix stack use after return
ARC: define __ALIGN_STR and __ALIGN symbols for ARC
KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs
KVM: x86: clear stale x86_emulate_ctxt->intercept value
gfs2_atomic_open(): fix O_EXCL|O_CREAT handling on cold dcache
cifs_atomic_open(): fix double-put on late allocation failure
ktest: Add timeout for ssh sync testing
pinctrl: falcon: fix syntax error
mmc: sdhci-pci-gli: Enable MSI interrupt for GL975x
drm/i915: Defer semaphore priority bumping to a workqueue
drm/i915: be more solid in checking the alignment
drm/amd/display: remove duplicated assignment to grph_obj_type
workqueue: don't use wq_select_unbound_cpu() for bound works
netfilter: x_tables: xt_mttg_seq_next should increase position index
netfilter: xt_recent: recent_seq_next should increase position index
netfilter: synproxy: synproxy_cpu_seq_next should increase position index
netfilter: nf_conntrack: ct_cpu_seq_next should increase position index
iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint
virtio-blk: fix hw_queue stopped on arbitrary error
iwlwifi: mvm: Do not require PHY_SKU NVM section for 3168 devices
netfilter: nf_tables: fix infinite loop when expr is not available
cgroup: Iterate tasks that did not finish do_exit()
cgroup: cgroup_procs_next should increase position index
net: phy: Avoid multiple suspends
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
selftests/net/fib_tests: update addr_metric_test for peer route testing
net/ipv6: remove the old peer route if change it to a new one
net/ipv6: need update peer route when modify metric
net: phy: fix MDIO bus PM PHY resuming
net: phy: avoid clearing PHY interrupts twice in irq handler
nfc: add missing attribute validation for vendor subcommand
nfc: add missing attribute validation for deactivate target
nfc: add missing attribute validation for SE API
tipc: add missing attribute validation for MTU property
team: add missing attribute validation for array index
team: add missing attribute validation for port ifindex
net: taprio: add missing attribute validation for txtime delay
net: fq: add missing attribute validation for orphan mask
macsec: add missing attribute validation for port
can: add missing attribute validation for termination
nl802154: add missing attribute validation for dev_type
nl802154: add missing attribute validation
fib: add missing attribute validation for tun_id
devlink: validate length of region addr/len
devlink: validate length of param values
net: memcg: fix lockdep splat in inet_csk_accept()
net: memcg: late association of sock to memcg
cgroup: memcg: net: do not associate sock with unrelated cgroup
bnxt_en: fix error handling when flashing from file
bnxt_en: reinitialize IRQs when MTU is modified
bonding/alb: make sure arp header is pulled before accessing it
taprio: Fix sending packets without dequeueing them
slip: make slhc_compress() more robust against malicious packets
sfc: detach from cb_page in efx_copy_channel()
r8152: check disconnect status after long sleep
net: systemport: fix index check to avoid an array out of bounds access
net: stmmac: dwmac1000: Disable ACS if enhanced descs are not used
net: phy: bcm63xx: fix OOPS due to missing driver name
net/packet: tpacket_rcv: do not increment ring index on drop
net: nfc: fix bounds checking bugs on "pipe"
net: macsec: update SCI upon MAC address change.
netlink: Use netlink header as base to calculate bad attribute offset
net/ipv6: use configured metric when add peer route
net: hns3: fix a not link up issue when fibre port supports autoneg
net: fec: validate the new settings in fec_enet_set_coalesce()
net: dsa: mv88e6xxx: fix lockup on warm boot
net: dsa: fix phylink_start()/phylink_stop() calls
macvlan: add cond_resched() during multicast processing
ipvlan: don't deref eth hdr before checking it's set
ipvlan: do not use cond_resched_rcu() in ipvlan_process_multicast()
ipvlan: do not add hardware address of master to its unicast filter list
ipvlan: add cond_resched_rcu() while processing muticast backlog
ipv6/addrconf: call ipv6_mc_up() for non-Ethernet interface
inet_diag: return classid for all socket types
gre: fix uninit-value in __iptunnel_pull_header
cgroup, netclassid: periodically release file_lock on classid updating
ALSA: hda/realtek - Fixed one of HP ALC671 platform Headset Mic supported
ALSA: hda/realtek - Add Headset Mic supported for HP cPC
ALSA: hda/realtek - More constifications
virtio_balloon: Adjust label in virtballoon_probe
ANDROID: GKI: Revert "mm: unexport free_reserved_area"
ANDROID: Export functions to be used with dma_map_ops in modules
ANDROID: GKI: add android_kabi.h
ANDROID: GKI: update abi due to CONFIG_JUMP_LABEL being enabled
ANDROID: GKI: enable CONFIG_JUMP_LABEL
ANDROID: Add build.config.gki-debug.x86_64
ANDROID: update the abi signatures
ANDROID: Add build.config.gki-debug.aarch64
Revert "ANDROID: drm: edid: add support for additional CEA extension blocks"
Revert "ANDROID: drm: Parse Colorimetry data block from EDID"
ANDROID: Add build.config files for ARM 32-bit
ANDROID: Kconfig.gki: Add FRAME_VECTOR
UPSTREAM: cgroup: Iterate tasks that did not finish do_exit()
ANDROID: gki_defconfig: Enable more USB_CONFIGFS gadgets
Revert "ANDROID: tty: serdev: Fix broken serial console input"
ANDROID: serdev: restrict claim of platform devices
ANDROID: Add TPM support and the vTPM proxy to Cuttlefish.
FROMGIT: ASoC: sprd: Allow the MCDT driver to build into modules
FROMGIT: thermal: sprd: Add Spreadtrum thermal driver support
FROMGIT: dt-bindings: thermal: sprd: Add the Spreadtrum thermal documentation
ANDROID: ABI update due to power supply patches being merged
FROMGIT: pinctrl: sprd: Fix the kconfig warning
FROMGIT: pinctrl: sprd: Allow the SPRD pinctrl driver building into a module
FROMGIT: pinctrl: Export some needed symbols at module load time
FROMGIT: power: reset: sc27xx: Allow the SC27XX poweroff driver building into a module
FROMGIT: power: reset: sc27xx: Change to use cpu_down()
FROMGIT: power: reset: sc27xx: Power off the external subsystems' connection
FROMGIT: power: supply: sc27xx: Add POWER_SUPPLY_PROP_CHARGE_NOW attribute
UPSTREAM: power: supply: sc27xx: Calibrate the resistance of coulomb counter
UPSTREAM: dt-bindings: power: sc27xx: Add a new property to describe the real resistance of coulomb counter chip
UPSTREAM: power: supply: sc27xx: Optimize the battery resistance with measuring temperature
UPSTREAM: power: supply: core: Add battery internal resistance temperature table support
UPSTREAM: dt-bindings: power: Introduce one property to describe the battery resistance with temperature changes
ANDROID: abi_gki_aarch64_whitelist: update after whitelist changes
ANDROID: update abi_gki_aarch64_cuttlefish_whitelist
ANDROID: update abi_gki_aarch64_db845c_whitelist
ANDROID: update abi due to interconnect changes
UPSTREAM: interconnect: Handle memory allocation errors
UPSTREAM: interconnect: Add basic tracepoints
UPSTREAM: interconnect: Add a name to struct icc_path
UPSTREAM: interconnect: Move internal structs into a separate file
Linux 5.4.25
drm/virtio: module_param_named() requires linux/moduleparam.h
csky: Implement copy_thread_tls
block, bfq: remove ifdefs from around gets/puts of bfq groups
block, bfq: get a ref to a group when adding it to a service tree
efi: READ_ONCE rng seed size before munmap
efi/x86: Handle by-ref arguments covering multiple pages in mixed mode
efi/x86: Align GUIDs to their size in the mixed mode runtime wrapper
powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems
EDAC/synopsys: Do not print an error with back-to-back snprintf() calls
bus: ti-sysc: Fix 1-wire reset quirk
arm64: dts: meson: fix gxm-khadas-vim2 wifi
dmaengine: coh901318: Fix a double lock bug in dma_tc_handle()
dma-buf: free dmabuf->name in dma_buf_release()
hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()
ARM: dts: imx7-colibri: Fix frequency for sd/mmc
ARM: dts: dra7xx-clocks: Fixup IPU1 mux clock parent source
ARM: dts: am437x-idk-evm: Fix incorrect OPP node names
ARM: imx: build v7_cpu_resume() unconditionally
IB/hfi1, qib: Ensure RCU is locked when accessing list
RMDA/cm: Fix missing ib_cm_destroy_id() in ib_cm_insert_listen()
regulator: stm32-vrefbuf: fix a possible overshoot when re-enabling
RDMA/core: Fix protection fault in ib_mr_pool_destroy
RDMA/iwcm: Fix iwcm work deallocation
RDMA/siw: Fix failure handling during device creation
RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missing
RDMA/rw: Fix error flow during RDMA context initialization
Revert "RDMA/cma: Simplify rdma_resolve_addr() error flow"
soc: imx-scu: Align imx sc msg structs to 4
firmware: imx: Align imx_sc_msg_req_cpu_start to 4
firmware: imx: scu-pd: Align imx sc msg structs to 4
firmware: imx: misc: Align imx sc msg structs to 4
arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHY
ARM: dts: imx6: phycore-som: fix emmc supply
phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval
phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling
drm/i915/selftests: Fix return in assert_mmap_offset()
drm/i915: Program MBUS with rmw during initialization
drm/sun4i: de2/de3: Remove unsupported VI layer formats
drm/sun4i: Fix DE2 VI layer format support
drm/sun4i: Add separate DE3 VI layer formats
drm: kirin: Revert "Fix for hikey620 display offset problem"
drm/panfrost: Don't try to map on error faults
spi: atmel-quadspi: fix possible MMIO window size overrun
ASoC: dapm: Correct DAPM handling of active widgets during shutdown
ASoC: Intel: Skylake: Fix available clock counter incrementation
ASoC: pcm512x: Fix unbalanced regulator enable call in probe error path
ASoC: pcm: Fix possible buffer overflow in dpcm state sysfs output
powerpc/mm: Fix missing KUAP disable in flush_coherent_icache()
powerpc: Convert flush_icache_range & friends to C
powerpc: define helpers to get L1 icache sizes
ASoC: intel: skl: Fix possible buffer overflow in debug outputs
ASoC: intel: skl: Fix pin debug prints
ASoC: SOF: Fix snd_sof_ipc_stream_posn()
ASoC: topology: Fix memleak in soc_tplg_manifest_load()
ASoC: topology: Fix memleak in soc_tplg_link_elems_load()
drm/virtio: fix resource id creation race
drm/virtio: make resource id workaround runtime switchable.
spi: bcm63xx-hsspi: Really keep pll clk enabled
ARM: dts: ls1021a: Restore MDIO compatible to gianfar
arm64: dts: meson-sm1-sei610: add missing interrupt-names
dm: fix congested_fn for request-based device
dm zoned: Fix reference counter initial value of chunk works
dm writecache: verify watermark during resume
dm: report suspended device during destroy
dm cache: fix a crash due to incorrect work item cancelling
dm integrity: fix invalid table returned due to argument count mismatch
dm integrity: fix a deadlock due to offloading to an incorrect workqueue
dm integrity: fix recalculation when moving from journal mode to bitmap mode
dmaengine: tegra-apb: Prevent race conditions of tasklet vs free list
dmaengine: tegra-apb: Fix use-after-free
dmaengine: imx-sdma: Fix the event id check to include RX event for UART6
dmaengine: imx-sdma: fix context cache
s390/mm: fix panic in gup_fast on large pud
s390/pci: Fix unexpected write combine on resource
x86/pkeys: Manually set X86_FEATURE_OSPKE to preserve existing changes
spi: spidev: Fix CS polarity if GPIO descriptors are used
perf arm-spe: Fix endless record after being terminated
perf cs-etm: Fix endless record after being terminated
perf intel-bts: Fix endless record after being terminated
perf intel-pt: Fix endless record after being terminated
media: v4l2-mem2mem.c: fix broken links
media: vicodec: process all 4 components for RGB32 formats
media: mc-entity.c: use & to check pad flags, not ==
media: hantro: Fix broken media controller links
vt: selection, push sel_lock up
vt: selection, push console lock down
vt: selection, close sel_buffer race
serial: 8250_exar: add support for ACCES cards
tty: serial: fsl_lpuart: free IDs allocated by IDA
tty:serial:mvebu-uart:fix a wrong return
arm: dts: dra76x: Fix mmc3 max-frequency
arm64: dts: socfpga: agilex: Fix gmac compatible
btrfs: fix RAID direct I/O reads with alternate csums
fat: fix uninit-memory access for partial initialized inode
mm, hotplug: fix page online with DEBUG_PAGEALLOC compiled but not enabled
mm: fix possible PMD dirty bit lost in set_pmd_migration_entry()
mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking page tables prot_numa
vgacon: Fix a UAF in vgacon_invert_region
usb: core: port: do error out if usb_autopm_get_interface() fails
usb: core: hub: do error out if usb_autopm_get_interface() fails
usb: core: hub: fix unhandled return by employing a void function
usb: cdns3: gadget: toggle cycle bit before reset endpoint
usb: cdns3: gadget: link trb should point to next request
usb: dwc3: gadget: Update chain bit correctly when using sg list
usb: quirks: add NO_LPM quirk for Logitech Screen Share
usb: storage: Add quirk for Samsung Fit flash
cifs: fix rename() by ensuring source handle opened with DELETE bit
cifs: don't leak -EAGAIN for stat() during reconnect
ALSA: hda/realtek - Enable the headset of ASUS B9450FA with ALC294
ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master
ALSA: hda/realtek - Add Headset Button supported for ThinkPad X1
ALSA: hda/realtek - Add Headset Mic supported
binder: prevent UAF for binderfs devices II
binder: prevent UAF for binderfs devices
firmware: imx: scu: Ensure sequential TX
selftests: forwarding: vxlan_bridge_1d: use more proper tos value
arch/csky: fix some Kconfig typos
csky: Fixup compile warning for three unimplemented syscalls
csky: Fixup ftrace modify panic
csky/smp: Fixup boot failed when CONFIG_SMP
csky: Set regs->usp to kernel sp, when the exception is from kernel
csky/mm: Fixup export invalid_pte_table symbol
net: thunderx: workaround BGX TX Underflow issue
x86/xen: Distribute switch variables for initialization
ice: Don't tell the OS that link is going down
nvme: Fix uninitialized-variable warning
s390/qdio: fill SL with absolute addresses
x86/boot/compressed: Don't declare __force_order in kaslr_64.c
nvme-pci: Use single IRQ vector for old Apple models
nvme/pci: Add sleep quirk for Samsung and Toshiba drives
iommu/amd: Disable IOMMU on Stoney Ridge systems
net/mlx5: DR, Fix matching on vport gvmi
efi: Only print errors about failing to get certs if EFI vars are found
s390: make 'install' not depend on vmlinux
s390/cio: cio_ignore_proc_seq_next should increase position index
watchdog: da9062: do not ping the hw during stop()
net: ethernet: dm9000: Handle -EPROBE_DEFER in dm9000_parse_dt()
net: ks8851-ml: Fix 16-bit IO operation
net: ks8851-ml: Fix 16-bit data access
net: ks8851-ml: Remove 8-bit bus accessors
net: atlantic: check rpc result and wait for rpc address
selftests: forwarding: vxlan_bridge_1d: fix tos value
selftests: forwarding: use proto icmp for {gretap, ip6gretap}_mac testing
drm/msm/dsi/pll: call vco set rate explicitly
drm/msm/dsi: save pll state before dsi host is powered off
scsi: megaraid_sas: silence a warning
drm/modes: Allow DRM_MODE_ROTATE_0 when applying video mode parameters
drm/modes: Make sure to parse valid rotation value from cmdline
drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFI
drm/msm/mdp5: rate limit pp done timeout warnings
habanalabs: patched cb equals user cb in device memset
habanalabs: do not halt CoreSight during hard reset
habanalabs: halt the engines before hard-reset
usb: gadget: serial: fix Tx stall after buffer overflow
usb: gadget: ffs: ffs_aio_cancel(): Save/restore IRQ flags
usb: gadget: composite: Support more than 500mA MaxPower
selftests: fix too long argument
serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
ALSA: hda: do not override bus codec_mask in link_get()
blktrace: fix dereference after null check
kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic
kbuild: fix 'No such file or directory' warning when cleaning
RDMA/core: Fix use of logical OR in get_new_pps
RDMA/core: Fix pkey and port assignment in get_new_pps
dm thin metadata: fix lockdep complaint
net: stmmac: fix notifier registration
net: dsa: bcm_sf2: Forcibly configure IMP port for 1Gb/sec
ALSA: hda/realtek - Fix a regression for mute led on Lenovo Carbon X1
block, bfq: do not insert oom queue into position tree
block, bfq: get extra ref to prevent a queue from being freed during a group move
FROMGIT: kallsyms: unexport kallsyms_lookup_name() and kallsyms_on_each_symbol()
FROMGIT: samples/hw_breakpoint: drop use of kallsyms_lookup_name()
FROMGIT: samples/hw_breakpoint: drop HW_BREAKPOINT_R when reporting writes
UPSTREAM: fscrypt: don't evict dirty inodes after removing key
ANDROID: ABI/Whitelist: update whitelist of unisoc upstream code
ANDROID: gki_defconfig: Enable CONFIG_VM_EVENT_COUNTERS
ANDROID: gki_defconfig: Enable CONFIG_CLEANCACHE
ANDROID: arm64: update the abi with the new gki_defconfig
ANDROID: gki_defconfig: disable CONFIG_DEBUG_DEVRES
ANDROID: Update the abi xml file
ANDROID: GKI: arm64: reserve space in cpu_hwcaps and cpu_hwcap_keys arrays
FROMGIT: power: supply: Allow charger manager can be built as a module
ANDROID: arm64: gki_defconfig: disable CONFIG_DEBUG_PREEMPT
ANDROID: iommu/iova: Fix to use __alloc_and_insert_iova_best_fit
ANDROID: enable CONFIG_WATCHDOG_CORE=y
ANDROID: kbuild: align UNUSED_KSYMS_WHITELIST with upstream
FROMLIST: f2fs: fix wrong check on F2FS_IOC_FSSETXATTR
ANDROID: gki_defconfig: enable CONFIG_TYPEC
UPSTREAM: scsi: ufs: ufs-mediatek: add waiting time for reference clock
UPSTREAM: scsi: ufs: introduce common function to disable host TX LCC
UPSTREAM: scsi: ufs: ufs-mediatek: fix TX LCC disabling timing
UPSTREAM: scsi: ufs: ufs-mediatek: gate ref-clk during Auto-Hibern8
UPSTREAM: scsi: ufs: fix Auto-Hibern8 error detection
UPSTREAM: scsi: ufs: ufs-mediatek: support linkoff state during suspend
UPSTREAM: scsi: ufs: ufs-mediatek: ensure UniPro is not powered down before linkup
UPSTREAM: scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init()
BACKPORT: scsi: ufs: Split ufshcd_probe_hba() based on its called flow
FROMGIT: driver core: Reevaluate dev->links.need_for_probe as suppliers are added
FROMGIT: driver core: Call sync_state() even if supplier has no consumers
ANDROID: cpufreq: times: Remove per-UID time in state tracking
Revert "ANDROID: proc: Add /proc/uid directory"
Revert "ANDROID: cpufreq: Add time_in_state to /proc/uid directories"
ANDROID: cpufreq: times: Remove /proc/uid_concurrent_{active,policy}_time
ANDROID: drm: Add support for DP 1.4 Compliance edid corruption test
Revert "ANDROID: drm: Add support for DP 1.4 Compliance edid corruption test"
ANDROID: staging: ion: Add an in-kernel interface to request heap info.
FROMLIST: lib: test_stackinit.c: XFAIL switch variable init tests
UPSTREAM: scsi: ufs: Abort gating if clock on request is pending
UPSTREAM: scsi: ufs: Fix irq return code
UPSTREAM: scsi: ufs: Fix register dump caused sleep in atomic context
UPSTREAM: scsi: ufs-qcom: Add reset control support for host controller
UPSTREAM: scsi: ufs: Add device reset in link recovery path
FROMGIT: scsi: ufs-qcom: Delay specific time before gate ref clk
BACKPORT: FROMGIT: scsi: ufs: Add dev ref clock gating wait time support
Revert "FROMLIST: scsi: ufs: Add dev ref clock gating wait time support"
FROMGIT: scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting
Revert "FROMLIST: scsi: ufs-qcom: Adjust bus bandwidth voting and unvoting"
ANDROID: CC_FLAGS_CFI add -fno-sanitize-blacklist
Conflicts:
Documentation/devicetree/bindings
Documentation/devicetree/bindings/power/supply/battery.txt
Documentation/devicetree/bindings/power/supply/sc27xx-fg.txt
drivers/dma-buf/dma-buf.c
drivers/interconnect/core.c
drivers/interconnect/internal.h
drivers/scsi/ufs/ufs-qcom.c
drivers/scsi/ufs/ufs-qcom.h
drivers/scsi/ufs/ufshcd.h
drivers/thermal/Makefile
drivers/usb/dwc3/gadget.c
drivers/usb/gadget/composite.c
drivers/usb/gadget/function/f_fs.c
scripts/gen_autoksyms.sh
Change-Id: Ic3227858328ceef3f34273428d1c4f81b78757b2
Signed-off-by: Blagovest Kolenichev <bkolenichev@codeaurora.org>
Small BW votes that translate to less than a single BCM unit are
currently truncated to zero. Ensure that non-zero BW requests always
result in at least a vote of 1 to BCM.
Change-Id: I144b22c11d19e29bebd19685b4d1a0e2b14a6abd
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
The QUP BCMs expect requests to be made in KHz. However, since we
currently scale client requests by 1000, this requires client requests
to be made in MHz. To align with the rest of the non-HLOS images, to
make things more consistent with other BCMs that use KBps, and to allow
for finer-grained frequency requests, change the scaling factor to 1.
This allows the client requests to be made in KHz.
Change-Id: I5b9e53d3fe2691830f304f909cd3ac0c94dacbcf
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Currently, bcm-voter always assumes requests are made in KBps and that
BCM HW always wants them in Bps, so it always scales the requests by
1000. However, certain use cases and BCMs may use different units.
Thus, add support for BCM-specific scaling factors.
Change-Id: Icb757e5e111f3e9a39e34cce989d076a80a7c79a
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
The current strategy of using macros to define/initialize structures
causes a couple of problems.
One is that it's difficult to navigate the code. Source navigators like
cscope or ctags can't jump to structure definitions since they're buried
inside macros. It's also difficult to see which structure members are
getting initialized to which values, since one has to carefully compare
the argument list with the macro definition to see which argument number
gets assigned to which struct member. This is error prone.
Another more serious problem is that it makes adding additional struct
members to be initialized very difficult. If there's a new struct member
that only needs to be initialized in a small number of cases, then we'd
either need to update the common macro with a new parameter and then
update every invocation of it, or create a new macro and only call the
new macro in places where it's needed. The first method results in
updating way more code than is necessary, especially if there are
multiple old chipsets. The second method results in an explosion of
different macros for each new member that needs initializing.
To simplify this, don't use the macro initializers and instead just
define the structures directly using designated initializers. If a new,
uncommon field needs to be initialized, then one the small subsets of
structures that care need to add the additional designated initializer
and the rest can use sane defaults.
Change-Id: I3a0ae58ba1fb1e838b5b587f94144a1ec1640f98
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Use the correct dt-binding for qnm_pcie in the node lookup array. The
specific array index is only important for the xlate() callback. Using
the wrong binding means of_icc_get() will fail for any clients
attempting to get a phandle to MASTER_ANOC_PCIE_GEM_NOC in devicetree.
However, even with the wrong array index the node will still be
registered and paths through this node will still function properly.
Change-Id: I484461020b39e68c380fa5a26078ed9712c93e4c
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Enable QoS configuration for the the rest of the QoS ports, including
IPA and the second MMNOC ports.
Change-Id: I1ff839f5f1d422eb1170b1bf94a6d375e61eeb5d
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Fix the BCM commit bit not getting set for TCS commands that don't wait
for completion. The current code overloads the commit/wait behavior
using the same "commit" argument to tcs_cmd_gen(), which means we'll
only commit commands that wait for completion. The commit bit needs to
be set for the last command in each VCD regardless of the wait behavior.
Add a dedicated "wait" parameter to tcs_cmd_gen() to separate this
behavior.
Change-Id: I8d577f24b07de2f37f13365c43690bae954508f4
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
The qcom,lahaina-epss-l3-shared provider currently only defines a single
endpoint: SLAVE_EPSS_L3_SHARED. The framework only calls the set()
callback for pairs of nodes. If there is no valid pair belonging to the
provider, then apply_constraints() and icc_set_bw() will return -EINVAL.
The lahaina-epss-l3-shared provider would need an additional master
endpoint for these requests to work.
However, even if that problem is fixed, there's another problem in
qcom_icc_l3_shared_set() that prevents the requested level from taking
effect in HW. This function writes the required level into the
PERF_STATE_DESIRED register, which is ignored when per-CPU L3 voting is
enabled in HW. When per-CPU L3 voting is enabled, only the L3_VOTE
register is counted.
To fix both of these problems, just remove the separate
qcom,lahaina-epss-l3-shared provider entirely and move
SLAVE_EPSS_L3_SHARED as an endpoint on qcom,lahaina-epss-l3-cpu. The
qcom_icc_l3_cpu_set() function uses the L3_VOTE register and can be used
for the shared L3 vote as-is. The only reason we'd ever need to use
PERF_STATE_DESIRED is if per-CPU L3 voting is disabled, but that will
likely never happen. All use cases can already be supported with per-CPU
voting enabled (per-CPU, shared, or a mix of both).
Change-Id: Ia67aadf26896a3a819aba8f2e4196d78d0c5c1f5
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Move the QoS configuration to happen on the first non-zero bandwidth
request from the consumer driver. This allows configuring QoS also
for consumers like IPA, which can probe asynchronously and their clock
should not be touched until the firmware has completed booting.
Change-Id: I2a8e385d99f3c489d920a7c85e9415d540f6df87
Signed-off-by: Georgi Djakov <gdjako@codeaurora.org>
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Currently, when sync_state re-votes to remove the init proxies, it
re-votes each voter for each BCM. However, each BCM is associated with
exactly one voter, so we only need to re-vote using the single voter
associated with the BCM. Not only does this improve performance by
removing unnecessary votes, but it can also fix stability issues when
the voter RSC isn't available yet.
Change-Id: Id2de6959ffb17b10c9e88d31308fd22964c3e456
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
The interconnect graphs can be difficult to understand and the current
"interconnect_summary" file doesn't even display links in any way.
Add a new "interconnect_graph" file to debugfs in the graphviz "dot"
format which describes interconnect providers, nodes and links.
The file is human-readable and can be visualized by piping through
graphviz. Example:
ssh $TARGET cat /sys/kernel/debug/interconnect/interconnect_graph \
| dot -Tsvg > interconnect_graph.svg
Change-Id: I372a284efd67cf02b6791758c0ab836b8f011f7a
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Git-commit: 1a0013c62b33158dcb67a3c11872a03be50711a3
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Georgi Djakov <gdjako@codeaurora.org>
Currently, all bcm-voters follow the same logic for when a tcs_cmd needs
to wait for completion. This logic sets tcs_cmd::wait = true for the
last command in each TCS (AMC, WAKE, and SLEEP). However, this isn't
necessarily the desired behavior for each bcm-voter, so allow which
TCS's require wait-for-completion to be specified in devicetree.
Additionally, change the default behavior to only wait for completion in
AMC and WAKE sets. The SLEEP set generally does not require this, since
in essentially all cases resources are only being disabled in the sleep
set and that can happen asynchronously in parallel with the rest of the
power collapse sequence.
Change-Id: If782f88c2748f018863fe1cdbc8c82ad427c3e9f
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Replace internal bucket/tag macros with those defined in dt-bindings.
Change-Id: Id91dacaeb6b45174ee9e59056fe4bc497951a27a
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
When we allocate memory, kasprintf() can fail and we must check its
return value.
Bug: 151255205
Fixes: 05309830e1f8 ("interconnect: Add a name to struct icc_path")
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20200226110420.5357-2-georgi.djakov@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 3791163602f7140011a8dc1691cfe6ec0cb1ef07)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I3eced73454428bf486e511cb5065f4b75bdfe3c4
The tracepoints can help with understanding the system behavior of a
given interconnect path when the consumer drivers change their bandwidth
demands. This might be interesting when we want to monitor the requested
interconnect bandwidth for each client driver. The paths may share the
same nodes and this will help to understand "who and when is requesting
what". All this is useful for subsystem drivers developers and may also
provide hints when optimizing the power and performance profile of the
system.
Bug: 151255205
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
(cherry picked from commit c46ab9db64979b0875fff79e1b00013343ca8286)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ia2276cc83a2a73c66207bdf14b87402b96d623a7
When debugging interconnect things, it turned out that saving the path
name and including it in the traces is quite useful, especially for
devices with multiple paths.
For the path name we use the one specified in DT, or if we use platform
data, the name is based on the source and destination node names.
Bug: 151255205
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
(cherry picked from commit 05309830e1f869f939e283576dd3684313390062)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I81ef3e94092682e8ca986f4dafce03be46e28218
Move the interconnect framework internal structs into a separate file,
so that it can be included and used by ftrace code. This will allow us
to expose some more useful information in the traces.
Bug: 151255205
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
(cherry picked from commit dd018a9cf9108f9c7d924f6fe09aed745e78a67e)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I913023038160d36c75dec1d04c89cd4671977321
Currently, if tcs_cmd_gen is called with commit=false, then
tcs_cmd::wait is left uninitialized. Since the tcs_cmd structures passed
to this function aren't zero-initialized, then we're left with random
wait values. This results in waiting for completion for more commands
than is necessary, depending on what's on the stack at the time.
Removing the unnecessary if-condition fixes this, but add an explicit
memset of the tcs_cmd structure as well to ensure predictable behavior
if more tcs_cmd members are added in the future.
Change-Id: Ib85f6bd76b5fa3b4295e998b2651485687a558df
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
AMC requests made while the RSC is in solver mode result in a -EBUSY
response from the rpmh driver. This is expected and is a non-issue since
in this case we just need the request to apply to the WAKE set instead.
It's only possible to see this for secondary RSCs like the Display RSC,
since the primary Apps RSC will only be in solver during the power
collapse/restore sequences while SW isn't running. Ignore -EBUSY so we
don't return an error and short-circuit before sending the necessary
WAKE/SLEEP requests.
Change-Id: Id34b91c6e46d282be2522434d3c2b4837291b3b7
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
Now we can have a tag associated with the path. Add this information
to the interconnect_summary file, as the current information in debugfs
is incomplete.
Change-Id: If4629841e3899ea6176d86f5151340f4bacc1002
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Git-commit: 2c5127a7fa0369801e623e8c6e58193f86d31d73
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
