The WLAN LED on the Linksys WRT54GSv1 is active low, but the software
treats it as active high. Fix the inverted logic.
Fixes: 7bb26b1691 ("MIPS: BCM47xx: Fix LEDs on WRT54GS V1.0")
Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
Looks-ok-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.17+
Patchwork: https://patchwork.linux-mips.org/patch/16071/
Signed-off-by: James Hogan <jhogan@kernel.org>
ASC1 is available on every Lantiq SoC (also AmazonSE) and should be
enabled like the other generic xway clocks instead of ASC0, which is
only available for AR9 and Danube.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16145/
[jhogan@kernel.org: Drop braces]
Signed-off-by: James Hogan <jhogan@kernel.org>
Since it can take a while before a specific thread gets scheduled, it
is better to just implement a first come first served queue mechanism.
That way, if a thread is already scheduled and is idle, it can pick up
the work to do from the queue.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If a delegation has been revoked by the server, operations using that
delegation should error out with NFS4ERR_DELEG_REVOKED in the >4.1
case, and NFS4ERR_BAD_STATEID otherwise.
The server needs NFSv4.1 clients to explicitly free revoked delegations.
If the server returns NFS4ERR_DELEG_REVOKED, the client will do that;
otherwise it may just forget about the delegation and be unable to
recover when it later sees SEQ4_STATUS_RECALLABLE_STATE_REVOKED set on a
SEQUENCE reply. That can cause the Linux 4.1 client to loop in its
stage manager.
Signed-off-by: Andrew Elble <aweits@rit.edu>
Reviewed-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I noticed the server was sometimes not closing the connection after
a flushed Send. For example, if the client responds with an RNR NAK
to a Reply from the server, that client might be deadlocked, and
thus wouldn't send any more traffic. Thus the server wouldn't have
any opportunity to notice the XPT_CLOSE bit has been set.
Enqueue the transport so that svcxprt notices the bit even if there
is no more transport activity after a flushed completion, QP access
error, or device removal event.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Publishing of net pointer is not safe,
let's use nfs->ns.inum instead
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It would be kinder to WARN() and recover in several spots here instead
of BUG()ing.
Also, it looks like the read_u32_from_xdr_buf() call could actually
fail, though it might require a broken (or malicious) client, so convert
that to just an error return.
Reported-by: Weston Andros Adamson <dros@monkey.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
do_gettimeofday() is deprecated and we should generally use time64_t
based functions instead.
In case of nfsd, all three users of nfssvc_boot only use the initial
time as a unique token, and are not affected by it overflowing, so they
are not affected by the y2038 overflow.
This converts the structure to timespec64 anyway and adds comments
to all uses, to document that we have thought about it and avoid
having to look at it again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nfs4_file.fi_ref is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nfs4_cntl_odstate.co_odcount is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nfs4_stid.sc_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
lockd_up() can call lockd_unregister_notifiers twice:
inside lockd_start_svc() when it calls lockd_svc_exit_thread()
and then in error path of lockd_up()
Patch forces lockd_start_svc() to unregister notifiers in all error cases
and removes extra unregister in error path of lockd_up().
Fixes: cb7d224f82 "lockd: unregister notifier blocks if the service ..."
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The spec allows us to return NFS4ERR_SEQ_FALSE_RETRY if we notice that
the client is making a call that matches a previous (slot, seqid) pair
but that *isn't* actually a replay, because some detail of the call
doesn't actually match the previous one.
Catching every such case is difficult, but we may as well catch a few
easy ones. This also handles the case described in the previous patch,
in a different way.
The spec does however require us to catch the case where the difference
is in the rpc credentials. This prevents somebody from snooping another
user's replies by fabricating retries.
(But the practical value of the attack is limited by the fact that the
replies with the most sensitive data are READ replies, which are not
normally cached.)
Tested-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently our handling of 4.1+ requests without "cachethis" set is
confusing and not quite correct.
Suppose a client sends a compound consisting of only a single SEQUENCE
op, and it matches the seqid in a session slot (so it's a retry), but
the previous request with that seqid did not have "cachethis" set.
The obvious thing to do might be to return NFS4ERR_RETRY_UNCACHED_REP,
but the protocol only allows that to be returned on the op following the
SEQUENCE, and there is no such op in this case.
The protocol permits us to cache replies even if the client didn't ask
us to. And it's easy to do so in the case of solo SEQUENCE compounds.
So, when we get a solo SEQUENCE, we can either return the previously
cached reply or NFSERR_SEQ_FALSE_RETRY if we notice it differs in some
way from the original call.
Currently, we're returning a corrupt reply in the case a solo SEQUENCE
matches a previous compound with more ops. This actually matters
because the Linux client recently started doing this as a way to recover
from lost replies to idempotent operations in the case the process doing
the original reply was killed: in that case it's difficult to keep the
original arguments around to do a real retry, and the client no longer
cares what the result is anyway, but it would like to make sure that the
slot's sequence id has been incremented, and the solo SEQUENCE assures
that: if the server never got the original reply, it will increment the
sequence id. If it did get the original reply, it won't increment, and
nothing else that about the reply really matters much. But we can at
least attempt to return valid xdr!
Tested-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The function _svc_create_xprt is local to the source and
does not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol '_svc_create_xprt' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Function vega10_apply_state_adjust_rules() only initializes
stable_pstate_sclk_dpm_percentage when
data->registry_data.stable_pstate_sclk_dpm_percentage is not between 1
and 100. The variable is then used to compute stable_pstate_sclk, which
therefore uses an uninitialized value.
Fix this by initializing stable_pstate_sclk_dpm_percentage to
data->registry_data.stable_pstate_sclk_dpm_percentage.
This issue has been found while building the kernel with clang. The
compiler reported a -Wsometimes-uninitialized warning.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: f83a999164 ("drm/amd/powerplay: add Vega10 powerplay support (v5)")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Tested-and-Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reported by smartch:
amdgpu_dm_commit_planes() error: double unlock 'spin_lock:&crtc->dev->event_lock'
amdgpu_dm_commit_planes() error: double unlock 'irqsave:flags'
The error path doesn't return so we only need a single unlock.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From smatch:
error: we previously assumed X could be null
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More "warn: inconsistent indenting" fixes from smatch.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes all the current smatch:
warn: inconsistent indenting
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smatch reported:
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce80/command_table_helper_dce80.c:351:71: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce80_get_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce110/command_table_helper_dce110.c:361:72: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce110_get_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce112/command_table_helper_dce112.c:415:72: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce112_get_table'
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/dce112/command_table_helper2_dce112.c:415:73: warning: non-ANSI function declaration of function 'dal_cmd_tbl_helper_dce112_get_table2'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_surface.c:148:34: warning: non-ANSI function declaration of function 'dc_create_gamma'
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_surface.c:178:50: warning: non-ANSI function declaration of function 'dc_create_transfer_func'
This fixes them.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We assign "v_init = asic_blank_start;" a few lines earlier so there is
no need to do it again inside the if statements. Also "v_init" is
unsigned so it can't be less than zero.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
backlight_device_register() never returns NULL, it returns error
pointers on error so the check here is wrong.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis tools get annoyed that we don't indent this if
statement. Actually, the if statement isn't required because kfree()
can handle NULL pointers just fine. The DCE110STRENC_FROM_STRENC()
macro is a wrapper around container_of() but it's basically a no-op or a
cast. Anyway, it's not really appropriate here so it should be removed
as well.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While the current kernel code in drivers/of/ allows developers to be
sloppy and use the status value "ok", the current DTSpec 0.1 makes it
clear that the only officially proper spelling is "okay", so adjust
the very small number of DTS files under arch/mips/.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17227/
Signed-off-by: James Hogan <jhogan@kernel.org>
Now that the SPDX tag is in all debugfs files, that identifies the
license in a specific and legally-defined manner. So the extra GPL text
wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the debugfs files files with the correct SPDX license identifier
based on the license text in the file itself. The SPDX identifier is a
legally binding shorthand, which can be used instead of the full boiler
plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, __debugfs_create_file allocates one struct debugfs_fsdata
instance for every file created. However, there are potentially many
debugfs file around, most of which are never touched by userspace.
Thus, defer the allocations to the first usage, i.e. to the first
debugfs_file_get().
A dentry's ->d_fsdata starts out to point to the "real", user provided
fops. After a debugfs_fsdata instance has been allocated (and the real
fops pointer has been moved over into its ->real_fops member),
->d_fsdata is changed to point to it from then on. The two cases are
distinguished by setting BIT(0) for the real fops case.
struct debugfs_fsdata's foremost purpose is to track active users and to
make debugfs_remove() block until they are done. Since no debugfs_fsdata
instance means no active users, make debugfs_remove() return immediately
in this case.
Take care of possible races between debugfs_file_get() and
debugfs_remove(): either debugfs_remove() must see a debugfs_fsdata
instance and thus wait for possible active users or debugfs_file_get() must
see a dead dentry and return immediately.
Make a dentry's ->d_release(), i.e. debugfs_release_dentry(), check whether
->d_fsdata is actually a debugfs_fsdata instance before kfree()ing it.
Similarly, make debugfs_real_fops() check whether ->d_fsdata is actually
a debugfs_fsdata instance before returning it, otherwise emit a warning.
The set of possible error codes returned from debugfs_file_get() has grown
from -EIO to -EIO and -ENOMEM. Make open_proxy_open() and full_proxy_open()
pass the -ENOMEM onwards to their callers.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current implementation of debugfs_real_fops() relies on a
debugfs_fsdata instance to be installed at ->d_fsdata.
With future patches introducing lazy allocation of these, this requirement
will be guaranteed to be fullfilled only inbetween a
debugfs_file_get()/debugfs_file_put() pair.
The full proxies' fops implemented by debugfs happen to be the only
offenders. Fix them up by moving their debugfs_real_fops() calls past those
to debugfs_file_get().
full_proxy_release() is special as it doesn't invoke debugfs_file_get() at
all. Leave it alone for now.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Purge the SRCU based file removal race protection in favour of the new,
refcount based debugfs_file_get()/debugfs_file_put() API.
Fixes: 49d200deaa ("debugfs: prevent access to removed files' private data")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert all calls to the now obsolete debugfs_use_file_start() and
debugfs_use_file_finish() to the new debugfs_file_get() and
debugfs_file_put() API.
Fixes: 49d200deaa ("debugfs: prevent access to removed files' private data")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert all calls to the now obsolete debugfs_use_file_start() and
debugfs_use_file_finish() from the debugfs core itself to the new
debugfs_file_get() and debugfs_file_put() API.
Fixes: 49d200deaa ("debugfs: prevent access to removed files' private data")
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, debugfs_real_fops() is annotated with a
__must_hold(&debugfs_srcu) sparse annotation.
With the conversion of the SRCU based protection of users against
concurrent file removals to a per-file refcount based scheme, this becomes
wrong.
Drop this annotation.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 49d200deaa ("debugfs: prevent access to removed files'
private data"), accesses to a file's private data are protected from
concurrent removal by covering all file_operations with a SRCU read section
and sychronizing with those before returning from debugfs_remove() by means
of synchronize_srcu().
As pointed out by Johannes Berg, there are debugfs files with forever
blocking file_operations. Their corresponding SRCU read side sections would
block any debugfs_remove() forever as well, even unrelated ones. This
results in a livelock. Because a remover can't cancel any indefinite
blocking within foreign files, this is a problem.
Resolve this by introducing support for more granular protection on a
per-file basis.
This is implemented by introducing an 'active_users' refcount_t to the
per-file struct debugfs_fsdata state. At file creation time, it is set to
one and a debugfs_remove() will drop that initial reference. The new
debugfs_file_get() and debugfs_file_put(), intended to be used in place of
former debugfs_use_file_start() and debugfs_use_file_finish(), increment
and decrement it respectively. Once the count drops to zero,
debugfs_file_put() will signal a completion which is possibly being waited
for from debugfs_remove().
Thus, as long as there is a debugfs_file_get() not yet matched by a
corresponding debugfs_file_put() around, debugfs_remove() will block.
Actual users of debugfs_use_file_start() and -finish() will get converted
to the new debugfs_file_get() and debugfs_file_put() by followup patches.
Fixes: 49d200deaa ("debugfs: prevent access to removed files' private data")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the user provided fops, "real_fops", are stored directly into
->d_fsdata.
In order to be able to store more per-file state and thus prepare for more
granular file removal protection, wrap the real_fops into a dynamically
allocated container struct, debugfs_fsdata.
A struct debugfs_fsdata gets allocated at file creation and freed from the
newly intoduced ->d_release().
Finally, move the implementation of debugfs_real_fops() out of the public
debugfs header such that struct debugfs_fsdata's declaration can be kept
private.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes for 4.15 merge window:
Just the cherry-picked vc4 fix plus a GFP_NOFAIL annotation (there's
apparently some new options in-flight to change/audit
too-small-to-fail kmalloc semantics or something like that).
* tag 'drm-misc-next-fixes-2017-11-07' of git://anongit.freedesktop.org/drm/drm-misc:
drm/vc4: Fix wrong printk format in vc4_bo_stats_debugfs()
drm: Require __GFP_NOFAIL for the legacy drm_modeset_lock_all
Since commit 632c6e4ede ("drm/vblank: Fix flip event vblank count")
even drivers that don't implement accurate vblank timestamps will end
up using drm_crtc_accurate_vblank_count(). That leads to a WARN every
time drm_crtc_arm_vblank_event() gets called. The could be as often
as every frame for each active crtc.
Considering drm_crtc_accurate_vblank_count() is never any worse than
the drm_vblank_count() we used previously, let's just skip the WARN
unless DRM_UT_VBL is enabled. That way people won't be bothered by
this unless they're debugging vblank code. And let's also change it
to WARN_ONCE() so that even when you're debugging vblank code you
won't get drowned by constant WARNs.
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: "Szyprowski, Marek" <m.szyprowski@samsung.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Fixes: 632c6e4ede ("drm/vblank: Fix flip event vblank count")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171023152540.15364-1-ville.syrjala@linux.intel.com
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make the secondary switch clocks their own clocks. This allows proper
enable reference counting between SAR/XTM and the main switch clocks,
and controlling them individually from drivers.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-mips@linux-mips.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-serial@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Patchwork: https://patchwork.linux-mips.org/patch/17332/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Hogan <jhogan@kernel.org>
Codify using a named clock for the refclk of the uart. This makes it
easier if we might need to add a gating clock (like present on the
BCM6345).
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-mips@linux-mips.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-serial@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Patchwork: https://patchwork.linux-mips.org/patch/17328/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Hogan <jhogan@kernel.org>
