#include "holi-audio-overlay.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include "holi-pm7250b.dtsi"
#include "holi-pmic-overlay-pm6125.dtsi"
#include "holi-thermal-overlay-pm6125.dtsi"
#include "display/holi-sde-display-cdp-pm6125.dtsi"
#include <dt-bindings/iio/qti_power_supply_iio.h>
#include "display/blair-sde-display-cdp.dtsi"

&pm6125_pwm {
	status = "ok";
};

&wcd938x_codec {
	cdc-vdd-rxtx-supply = <&L9A>;
	cdc-vddio-supply = <&L9A>;
	qcom,cdc-static-supplies = "cdc-vdd-rxtx",
				   "cdc-vddio";
	/*
	 * Overriding cdc-vdd-mic-bias-supply to dummy value
	 * to avoid compilation errors as BOB is not definied
	 * for pm6125
	 */
	cdc-vdd-mic-bias-supply = <>;
};

&wcd937x_codec {
	cdc-vdd-rxtx-supply = <&L9A>;
	cdc-vddpx-supply = <&L9A>;
	qcom,cdc-static-supplies = "cdc-vdd-rxtx",
				   "cdc-vddpx";
	/*
	 * Overriding cdc-vdd-mic-bias-supply to dummy value
	 * to avoid compilation errors as BOB is not definied
	 * for pm6125
	 */
	cdc-vdd-mic-bias-supply = <>;
};

&wsa881x_i2c_e {
	cdc-vdd-1p8-supply = <&L9A>;
};

&wsa881x_i2c_f {
	cdc-vdd-1p8-supply = <&L9A>;
};

/* Dummy LDO reference */
&sdhc_1 {
	status = "ok";

	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&sdc1_on>;
	pinctrl-1 = <&sdc1_off>;

	vdd-supply = <&L24A>;
	qcom,vdd-voltage-level = <2960000 2960000>;
	qcom,vdd-current-level = <0 570000>;

	vdd-io-supply = <&L11A>;
	qcom,vdd-io-always-on;
	qcom,vdd-io-lpm-sup;
	qcom,vdd-io-voltage-level = <1800000 1800000>;
	qcom,vdd-io-current-level = <0 325000>;
};

&sdhc_2 {
	status = "ok";

	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&sdc2_on>;
	pinctrl-1 = <&sdc2_off>;

	vdd-supply = <&L22A>;
	qcom,vdd-voltage-level = <2960000 2960000>;
	qcom,vdd-current-level = <0 800000>;

	vdd-io-supply = <&L5A>;
	qcom,vdd-io-voltage-level = <1800000 2960000>;
	qcom,vdd-io-current-level = <0 22000>;

	cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
};

&ufsphy_mem {
		compatible = "qcom,ufs-phy-qmp-v4-yupik";

		vdda-phy-supply = <&L7A>;
		vdda-pll-supply = <&L4A>;
		vdda-phy-max-microamp = <85700>;
		vdda-pll-max-microamp = <18300>;


		status = "ok";
};

&ufshc_mem {
		vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
		vdd-hba-fixed-regulator;

		vcc-supply = <&L24A>;
		vcc-voltage-level = <2950000 2960000>;
		vcc-max-microamp = <800000>;

		vccq2-supply = <&L11A>;
		vccq2-max-microamp = <800000>;
		vccq2-voltage-level = <1800000 1800000>;

		qcom,vddp-ref-clk-supply = <&L4A>;
		qcom,vddp-ref-clk-max-microamp = <100>;

		status = "ok";
};

&qupv3_se0_i2c {
	status = "ok";
	#address-cells = <1>;
	#size-cells = <0>;
	nq@28 {
		compatible = "qcom,sn-nci";
		reg = <0x28>;
		qcom,sn-irq = <&tlmm 9 0x00>;
		qcom,sn-ven = <&tlmm 6 0x00>;
		qcom,sn-firm = <&tlmm 8 0x00>;
		qcom,sn-clkreq = <&tlmm 7 0x00>;
		qcom,sn-vdd-1p8-supply = <&L9A>;
		qcom,sn-vdd-1p8-voltage = <1800000 1800000>;
		qcom,sn-vdd-1p8-current = <157000>;
		interrupt-parent = <&tlmm>;
		interrupts = <9 0>;
		interrupt-names = "nfc_irq";
		pinctrl-names = "nfc_active", "nfc_suspend";
		pinctrl-0 = <&nfc_int_active &nfc_enable_active>;
		pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;
	};
};

&soc {
	gpio_keys {
		compatible = "gpio-keys";
		label = "gpio-keys";

		pinctrl-names = "default";
		pinctrl-0 = <&key_vol_up_default>;

		vol_up {
			label = "volume_up";
			gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
			linux,input-type = <1>;
			linux,code = <KEY_VOLUMEUP>;
			gpio-key,wakeup;
			debounce-interval = <15>;
			linux,can-disable;
		};
	};
};

&pm7250b_charger {
	status = "ok";
	#io-channel-cells = <1>;
	io-channels = <&pm7250b_vadc ADC5_USB_IN_V_16>,
		      <&pm7250b_vadc ADC5_USB_IN_I>,
		      <&pm7250b_vadc ADC5_CHG_TEMP>,
		      <&pm7250b_vadc ADC5_DIE_TEMP>,
		      <&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>,
		      <&pm7250b_vadc ADC5_SBUx>,
		      <&pm7250b_vadc ADC5_VPH_PWR>,
		      <&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>,
		      <&pm7250b_qg PSY_IIO_RESISTANCE_ID>,
		      <&pm7250b_qg PSY_IIO_VOLTAGE_NOW>,
		      <&pm7250b_qg PSY_IIO_TEMP>,
		      <&pm7250b_qg PSY_IIO_CAPACITY>,
		      <&pm7250b_qg PSY_IIO_VOLTAGE_OCV>,
		      <&pm7250b_qg PSY_IIO_VOLTAGE_AVG>,
		      <&pm7250b_qg PSY_IIO_DEBUG_BATTERY>,
		      <&pm7250b_qg PSY_IIO_REAL_CAPACITY>,
		      <&pm7250b_qg PSY_IIO_CC_SOC>,
		      <&pm7250b_qg PSY_IIO_CURRENT_NOW>,
		      <&pm7250b_qg PSY_IIO_VOLTAGE_MAX>,
		      <&pm7250b_qg PSY_IIO_CHARGE_FULL>,
		      <&pm7250b_qg PSY_IIO_CHARGE_COUNTER>,
		      <&pm7250b_qg PSY_IIO_CYCLE_COUNT>,
		      <&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>,
		      <&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>;
	io-channel-names = "usb_in_voltage",
			   "usb_in_current",
			   "chg_temp",
			   "die_temp",
			   "conn_temp",
			   "sbux_res",
			   "vph_voltage",
			   "skin_temp",
			   "resistance_id",
			   "voltage_now",
			   "temp",
			   "capacity",
			   "voltage_ocv",
			   "voltage_avg",
			   "debug_battery",
			   "real_capacity",
			   "cc_soc",
			   "current_now",
			   "voltage_max",
			   "charge_full",
			   "charge_counter",
			   "cycle_count",
			   "charge_full_design",
			   "time_to_full_now";
	qcom,batteryless-platform;
	qcom,sec-charger-config = <0>;
	qcom,auto-recharge-soc = <98>;
	qcom,step-charging-enable;
	qcom,sw-jeita-enable;
	qcom,charger-temp-max = <800>;
	qcom,smb-temp-max = <800>;
	qcom,suspend-input-on-debug-batt;
};

&pm7250b_qg {
	status = "ok";
	#io-channel-cells = <1>;
	io-channels = <&pm7250b_vadc ADC5_BAT_THERM_100K_PU>,
		      <&pm7250b_vadc ADC5_BAT_ID_100K_PU>,
		      <&pm7250b_charger PSY_IIO_INPUT_CURRENT_LIMITED>,
		      <&pm7250b_charger PSY_IIO_RECHARGE_SOC>,
		      <&pm7250b_charger PSY_IIO_FORCE_RECHARGE>,
		      <&pm7250b_charger PSY_IIO_CHARGE_DONE>;
	io-channel-names = "batt-therm",
			   "batt-id",
			   "input_current_limited",
			   "recharge_soc",
			   "force_recharge",
			   "charge_done";
	qcom,qg-iterm-ma = <100>;
	qcom,hold-soc-while-full;
	qcom,linearize-soc;
	qcom,cl-feedback-on;
	qcom,vbatt-cutoff-mv = <3400>;
	qcom,vbatt-empty-mv = <3200>;
	qcom,vbatt-empty-cold-mv = <3100>;
	qcom,vbatt-low-mv = <3500>;
	qcom,fvss-vbatt-mv = <3500>;
};

&soc {
	touch_avdd: touch_avdd_stub {
		/*
		 * Touch eLDO controlled by gpio#53 is always ON.
		 * Using dummy regulator.
		 */
		compatible = "qcom,stub-regulator";
		regulator-name = "touch_avdd_stub";
		qcom,hpm-min-load = <10000>;
		regulator-min-microvolt = <2700000>;
		regulator-max-microvolt = <3544000>;
	};
};

&qupv3_se8_i2c {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
	qcom,i2c-touch-active= "synaptics,tcm-i2c";

	synaptics_tcm@20 {
		compatible = "synaptics,tcm-i2c";
		reg = <0x20>;
		interrupt-parent = <&tlmm>;
		interrupts = <22 0x2008>;
		pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
					"pmx_ts_release";
		pinctrl-0 = <&ts_active>;
		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
		pinctrl-2 = <&pmx_ts_release>;
		vdd-supply = <&L9A>;
		avdd-supply = <&touch_avdd>;
		synaptics,pwr-reg-name = "avdd";
		synaptics,bus-reg-name = "vdd";
		synaptics,irq-gpio = <&tlmm 22 0x2008>;
		synaptics,irq-on-state = <0>;
		synaptics,reset-gpio = <&tlmm 21 0x00>;
		synaptics,reset-on-state = <0>;
		synaptics,reset-active-ms = <20>;
		synaptics,reset-delay-ms = <200>;
		synaptics,power-delay-ms = <200>;
		synaptics,ubl-i2c-addr = <0x20>;
		synaptics,extend_report;
		synaptics,firmware-name = "synaptics_firmware.img";

		panel = <&dsi_rm69299_visionox_amoled_video
			&dsi_rm69299_visionox_amoled_cmd>;
	};

	focaltech@38 {
		compatible = "focaltech,fts_ts";
		reg = <0x38>;
		interrupt-parent = <&tlmm>;
		interrupts = <22 0x2008>;
		focaltech,reset-gpio = <&tlmm 21 0x00>;
		focaltech,irq-gpio = <&tlmm 22 0x2008>;
		focaltech,max-touch-number = <5>;
		focaltech,display-coords = <0 0 1080 2340>;

		vdd-supply = <&touch_avdd>;

		pinctrl-names = "pmx_ts_active", "pmx_ts_suspend",
				"pmx_ts_release";
		pinctrl-0 = <&ts_active>;
		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
		pinctrl-2 = <&pmx_ts_release>;

		panel = <&dsi_r66451_amoled_cmd
			&dsi_r66451_amoled_video>;
	};

	novatek@62 {
		compatible = "novatek,NVT-ts";
		reg = <0x62>;

		interrupt-parent = <&tlmm>;
		interrupts = <22 0x2008>;

		pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
			"pmx_ts_release";

		pinctrl-0 = <&ts_active>;
		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
		pinctrl-2 = <&pmx_ts_release>;

		novatek,reset-gpio = <&tlmm 21 0x00>;
		novatek,irq-gpio = <&tlmm 22 0x2008>;

		panel = <&dsi_nt36672e_fhd_plus_60_video
			&dsi_nt36672e_fhd_plus_120_video
			&dsi_nt36672e_fhd_plus_144_video>;
	};
};

#include "camera/blair-camera-sensor-cdp.dtsi"

&pm7250b_charger {
	dpdm-supply = <&usb2_phy0>;

	smb5_vbus: qcom,smb5-vbus {
		regulator-name = "smb5-vbus";
	};

	smb5_vconn: qcom,smb5-vconn {
		regulator-name = "smb5-vconn";
	};
};

&pm7250b_pdphy {
	vdd-pdphy-supply = <&L7E>;
	vbus-supply = <&smb5_vbus>;
	vconn-supply = <&smb5_vconn>;

	#io-channel-cells = <1>;
	io-channels = <&pm7250b_charger PSY_IIO_PD_ACTIVE>,
		      <&pm7250b_charger PSY_IIO_TYPEC_CC_ORIENTATION>,
		      <&pm7250b_charger PSY_IIO_CONNECTOR_TYPE>,
		      <&pm7250b_charger PSY_IIO_TYPEC_POWER_ROLE>,
		      <&pm7250b_charger PSY_IIO_PD_USB_SUSPEND_SUPPORTED>,
		      <&pm7250b_charger PSY_IIO_TYPEC_SRC_RP>,
		      <&pm7250b_charger PSY_IIO_PD_IN_HARD_RESET>,
		      <&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>,
		      <&pm7250b_charger PSY_IIO_PR_SWAP>,
		      <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MIN>,
		      <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MAX>,
		      <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>,
		      <&pm7250b_charger PSY_IIO_TYPEC_MODE>,
		      <&pm7250b_charger PSY_IIO_PE_START>;
	io-channel-names = "pd_active",
			   "typec_cc_orientation",
			   "connector_type",
			   "typec_power_role",
			   "pd_usb_suspend_supported",
			   "typec_src_rp",
			   "pd_in_hard_reset",
			   "pr_current_max",
			   "pr_swap",
			   "pd_voltage_min",
			   "pd_voltage_max",
			   "real_type",
			   "typec_mode",
			   "pe_start";
};

&usb0 {
	extcon = <&pm7250b_pdphy>, <&pm7250b_charger>, <&eud>;

	#io-channel-cells = <1>;
	io-channels= <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>;
	io-channel-names = "chg_type";
};

&qupv3_se10_i2c {
	awinic@64 {
		compatible = "awinic,aw2016_led";
		reg = <0x64>;

		awinic,red {
			awinic,name = "red";
			awinic,id = <0>;
			awinic,imax = <2>;
			awinic,led-current = <3>;
			awinic,max-brightness = <255>;
			awinic,rise-time-ms = <6>;
			awinic,hold-time-ms = <0>;
			awinic,fall-time-ms = <6>;
			awinic,off-time-ms = <4>;
		};

		awinic,green {
			awinic,name = "green";
			awinic,id = <1>;
			awinic,imax = <2>;
			awinic,led-current = <3>;
			awinic,max-brightness = <255>;
			awinic,rise-time-ms = <6>;
			awinic,hold-time-ms = <0>;
			awinic,fall-time-ms = <6>;
			awinic,off-time-ms = <4>;
		};

		awinic,blue {
			awinic,name = "blue";
			awinic,id = <2>;
			awinic,imax = <2>;
			awinic,led-current = <3>;
			awinic,max-brightness = <255>;
			awinic,rise-time-ms = <6>;
			awinic,hold-time-ms = <0>;
			awinic,fall-time-ms = <6>;
			awinic,off-time-ms = <4>;
		};

	};
};