#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/iio/qcom,spmi-adc7-smb139x.h>

#include "pmk8350.dtsi"
#include "pm8350.dtsi"
#include "pm8350c.dtsi"
#include "pm8350b.dtsi"
#include "pmr735a.dtsi"
#include "pmr735b.dtsi"

&pm8350_gpios {
	key_vol_up {
		key_vol_up_default: key_vol_up_default {
			pins = "gpio6";
			function = "normal";
			input-enable;
			bias-pull-up;
			power-source = <1>;
		};
	};

	usb2_vbus_boost {
		usb2_vbus_boost_default: usb2_vbus_boost_default {
			pins = "gpio8";
			function = "normal";
			output-low;
			power-source = <0>;	/* 1.8V input supply */
		};
	};

	usb2_vbus_det {
		usb2_vbus_det_default: usb2_vbus_det_default {
			pins = "gpio9";
			function = "normal";
			input-enable;
			bias-disable;
			power-source = <0>;	/* 1.8V input supply */
		};
	};
};

&pm8350c_gpios {
	lcd_backlight_ctrl {
		lcd_backlight_ctrl_default: lcd_backlight_ctrl_default {
			pins = "gpio9";
			function = "func1";
			input-disable;
			output-enable;
			bias-disable;
			power-source = <1>;	/* 1.8V */
			qcom,drive-strength = <2>;
		};
	};
};

&qupv3_se13_i2c {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "ok";

	pm8008i@8 {
		compatible = "qcom,i2c-pmic";
		reg = <0x8>;
		#address-cells = <1>;
		#size-cells = <0>;

		pinctrl-names = "default";
		pinctrl-0 = <&pm8008i_active>;

		pm8008-chip@900 {
			compatible = "qcom,pm8008-chip";
			reg = <0x900>;

			PM8008I_EN: qcom,pm8008-chip-en {
				regulator-name = "pm8008i-chip-en";
			};
		};

		qcom,revid@100 {
			compatible = "qcom,qpnp-revid";
			reg = <0x100>;
		};
	};

	pm8008i@9 {
		compatible = "qcom,i2c-pmic";
		reg = <0x9>;
		#address-cells = <1>;
		#size-cells = <0>;

		qcom,pm8008i-regulator {
			compatible = "qcom,pm8008-regulator";
			#address-cells = <1>;
			#size-cells = <0>;

			pm8008_en-supply = <&PM8008I_EN>;
			vdd_l1_l2-supply = <&S12B>;
			vdd_l3_l4-supply = <&BOB>;
			vdd_l5-supply = <&S1C>;
			vdd_l6-supply = <&BOB>;
			vdd_l7-supply = <&BOB>;

			L1I: pm8008i_l1: regulator@4000 {
				reg = <0x4000>;
				regulator-name = "pm8008i_l1";
				regulator-min-microvolt = <1000000>;
				regulator-max-microvolt = <1104000>;
				qcom,min-dropout-voltage = <224000>;
				qcom,hpm-min-load = <0>;
			};

			L2I: pm8008i_l2: regulator@4100 {
				reg = <0x4100>;
				regulator-name = "pm8008i_l2";
				regulator-min-microvolt = <944000>;
				regulator-max-microvolt = <1152000>;
				qcom,min-dropout-voltage = <150000>;
				qcom,hpm-min-load = <0>;
			};

			L3I: pm8008i_l3: regulator@4200 {
				reg = <0x4200>;
				regulator-name = "pm8008i_l3";
				regulator-min-microvolt = <2696000>;
				regulator-max-microvolt = <3000000>;
				qcom,min-dropout-voltage = <200000>;
				qcom,hpm-min-load = <0>;
			};

			L4I: pm8008i_l4: regulator@4300 {
				reg = <0x4300>;
				regulator-name = "pm8008i_l4";
				regulator-min-microvolt = <2696000>;
				regulator-max-microvolt = <2904000>;
				qcom,min-dropout-voltage = <200000>;
				qcom,hpm-min-load = <0>;
			};

			L5I: pm8008i_l5: regulator@4400 {
				reg = <0x4400>;
				regulator-name = "pm8008i_l5";
				regulator-min-microvolt = <1696000>;
				regulator-max-microvolt = <1800000>;
				qcom,min-dropout-voltage = <70000>;
				qcom,hpm-min-load = <0>;
			};

			L6I: pm8008i_l6: regulator@4500 {
				reg = <0x4500>;
				regulator-name = "pm8008i_l6";
				regulator-min-microvolt = <2696000>;
				regulator-max-microvolt = <2904000>;
				qcom,min-dropout-voltage = <200000>;
				qcom,hpm-min-load = <0>;
			};

			L7I: pm8008i_l7: regulator@4600 {
				reg = <0x4600>;
				regulator-name = "pm8008i_l7";
				regulator-min-microvolt = <2696000>;
				regulator-max-microvolt = <3000000>;
				qcom,min-dropout-voltage = <200000>;
				qcom,hpm-min-load = <0>;
			};
		};
	};

	pm8008j@c {
		compatible = "qcom,i2c-pmic";
		reg = <0xc>;
		#address-cells = <1>;
		#size-cells = <0>;

		pinctrl-names = "default";
		pinctrl-0 = <&pm8008j_active>;

		pm8008-chip@900 {
			compatible = "qcom,pm8008-chip";
			reg = <0x900>;

			PM8008J_EN: qcom,pm8008-chip-en {
				regulator-name = "pm8008j-chip-en";
			};
		};

		qcom,revid@100 {
			compatible = "qcom,qpnp-revid";
			reg = <0x100>;
		};
	};

	pm8008j@d {
		compatible = "qcom,i2c-pmic";
		reg = <0xd>;
		#address-cells = <1>;
		#size-cells = <0>;

		qcom,pm8008j-regulator {
			compatible = "qcom,pm8008-regulator";
			#address-cells = <1>;
			#size-cells = <0>;

			pm8008_en-supply = <&PM8008J_EN>;
			vdd_l1_l2-supply = <&S12B>;
			vdd_l3_l4-supply = <&S1C>;
			vdd_l5-supply = <&BOB>;
			vdd_l6-supply = <&BOB>;
			vdd_l7-supply = <&BOB>;

			L1J: pm8008j_l1: regulator@4000 {
				reg = <0x4000>;
				regulator-name = "pm8008j_l1";
				regulator-min-microvolt = <944000>;
				regulator-max-microvolt = <1152000>;
				qcom,min-dropout-voltage = <100000>;
				qcom,hpm-min-load = <0>;
			};

			L2J: pm8008j_l2: regulator@4100 {
				reg = <0x4100>;
				regulator-name = "pm8008j_l2";
				regulator-min-microvolt = <944000>;
				regulator-max-microvolt = <1056000>;
				qcom,min-dropout-voltage = <225000>;
				qcom,hpm-min-load = <0>;
			};

			L3J: pm8008j_l3: regulator@4200 {
				reg = <0x4200>;
				regulator-name = "pm8008j_l3";
				regulator-min-microvolt = <1728000>;
				regulator-max-microvolt = <1800000>;
				qcom,min-dropout-voltage = <70000>;
				qcom,hpm-min-load = <0>;
			};

			L4J: pm8008j_l4: regulator@4300 {
				reg = <0x4300>;
				regulator-name = "pm8008j_l4";
				regulator-min-microvolt = <1728000>;
				regulator-max-microvolt = <1800000>;
				qcom,min-dropout-voltage = <70000>;
				qcom,hpm-min-load = <0>;
			};

			L5J: pm8008j_l5: regulator@4400 {
				reg = <0x4400>;
				regulator-name = "pm8008j_l5";
				regulator-min-microvolt = <2696000>;
				regulator-max-microvolt = <2904000>;
				qcom,min-dropout-voltage = <200000>;
				qcom,hpm-min-load = <0>;
			};

			L6J: pm8008j_l6: regulator@4500 {
				reg = <0x4500>;
				regulator-name = "pm8008j_l6";
				regulator-min-microvolt = <2800000>;
				regulator-max-microvolt = <2800000>;
				qcom,min-dropout-voltage = <200000>;
				qcom,hpm-min-load = <0>;
			};

			L7J: pm8008j_l7: regulator@4600 {
				reg = <0x4600>;
				regulator-name = "pm8008j_l7";
				regulator-min-microvolt = <2808000>;
				regulator-max-microvolt = <3600000>;
				qcom,min-dropout-voltage = <200000>;
				qcom,hpm-min-load = <0>;
			};
		};
	};
};

&pm8350_gpios {
	pm8350_rear_tof_therm {
		pm8350_rear_tof_therm_default: pm8350_rear_tof_therm_default {
			pins = "gpio1";
			bias-high-impedance;
		};
	};
};

&pmk8350_vadc {
	pinctrl-names = "default";
	pinctrl-0 = <&pm8350_rear_tof_therm_default>;

	pm8350_msm_therm {
		reg = <PM8350_ADC7_AMUX_THM1_100K_PU>;
		label = "pm8350_msm_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	pm8350_cam_flash_therm {
		reg = <PM8350_ADC7_AMUX_THM2_100K_PU>;
		label = "pm8350_cam_flash_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	pm8350_hot_pocket_therm {
		reg = <PM8350_ADC7_AMUX_THM3_100K_PU>;
		label = "pm8350_hot_pocket_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	pm8350_wide_rfc_therm {
		reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
		label = "pm8350_wide_rfc_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	pm8350_rear_tof_therm {
		reg = <PM8350_ADC7_AMUX_THM5_100K_PU>;
		label = "pm8350_rear_tof_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	pm8350b_usb_conn_therm {
		reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
		label = "pm8350b_usb_conn_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	pm8350b_wl_chg_therm {
		reg = <PM8350B_ADC7_GPIO2_100K_PU>;
		label = "pm8350b_wl_chg_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	pm8350b_chg_temp {
		reg = <PM8350B_ADC7_CHG_TEMP>;
		label = "pm8350b_chg_temp";
		qcom,pre-scaling = <1 1>;
	};

	pm8350b_iin_fb {
		reg = <PM8350B_ADC7_IIN_FB>;
		label = "pm8350b_iin_fb";
		qcom,pre-scaling = <32 100>;
	};

	pm8350b_ichg_fb {
		reg = <PM8350B_ADC7_ICHG_FB>;
		label = "pm8350b_ichg_fb";
		qcom,pre-scaling = <1000 305185>;
	};

	smb139x_1_smb_temp {
		reg = <SMB139x_1_ADC7_SMB_TEMP>;
		label = "smb139x_1_smb_temp";
		qcom,pre-scaling = <1 1>;
	};

	smb139x_1_ichg_smb {
		reg = <SMB139x_1_ADC7_ICHG_SMB>;
		label = "smb139x_1_ichg_smb";
		qcom,pre-scaling = <16 100>;
	};

	smb139x_1_iin_smb {
		reg = <SMB139x_1_ADC7_IIN_SMB>;
		label = "smb139x_1_iin_smb";
		qcom,pre-scaling = <32 100>;
	};

	smb139x_2_smb_temp {
		reg = <SMB139x_2_ADC7_SMB_TEMP>;
		label = "smb139x_2_smb_temp";
		qcom,pre-scaling = <1 1>;
	};

	smb139x_2_ichg_smb {
		reg = <SMB139x_2_ADC7_ICHG_SMB>;
		label = "smb139x_2_ichg_smb";
		qcom,pre-scaling = <16 100>;
	};

	smb139x_2_iin_smb {
		reg = <SMB139x_2_ADC7_IIN_SMB>;
		label = "smb139x_2_iin_smb";
		qcom,pre-scaling = <32 100>;
	};
};

&pm8350_tz {
	io-channels = <&pmk8350_vadc PM8350_ADC7_DIE_TEMP>;
	io-channel-names = "thermal";
};

&pm8350b_tz {
	io-channels = <&pmk8350_vadc PM8350B_ADC7_DIE_TEMP>;
	io-channel-names = "thermal";
};

&pmk8350_sdam_2 {
	hap_cl_brake: cl_brake@7c {
		reg = <0x7c 0x1>;
		bits = <0 8>;
	};
};

&pm8350b_haptics {
	nvmem-cell-names = "hap_cl_brake";
	nvmem-cells = <&hap_cl_brake>;
	nvmem-names = "hap_cfg_sdam";
	nvmem = <&pmk8350_sdam_46>;
	qcom,pbs-client = <&pm8350b_pbs2>;
};

&pmr735a_tz {
	io-channels = <&pmk8350_vadc PMR735A_ADC7_DIE_TEMP>;
	io-channel-names = "thermal";
};

&pmr735b_tz {
	io-channels = <&pmk8350_vadc PMR735B_ADC7_DIE_TEMP>;
	io-channel-names = "thermal";
};

&pmk8350_adc_tm {
	io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU>,
			<&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU>,
			<&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU>,
			<&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>,
			<&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU>,
			<&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>,
			<&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>,
			<&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;

	pm8350_msm_therm {
		reg = <PM8350_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	pm8350_cam_flash_therm {
		reg = <PM8350_ADC7_AMUX_THM2_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	pm8350_hot_pocket_therm {
		reg = <PM8350_ADC7_AMUX_THM3_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	pm8350_wide_rfc_therm {
		reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	pm8350_rear_tof_therm {
		reg = <PM8350_ADC7_AMUX_THM5_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	pm8350b_usb_conn_therm {
		reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	pm8350b_wl_chg_therm {
		reg = <PM8350B_ADC7_GPIO2_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};

	pmk8350_xo_therm {
		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
	};
};

&thermal_zones {
	skin-msm-therm-usr {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM1_100K_PU>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			active-config1 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	camera-therm-usr {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM2_100K_PU>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	hot-pock-therm-usr {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM3_100K_PU>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	rear-cam-therm-usr {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM4_100K_PU>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	tof-therm-usr {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM5_100K_PU>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	conn-therm-usr {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pmk8350_adc_tm PM8350B_ADC7_AMUX_THM4_100K_PU>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	wlc-therm-usr {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pmk8350_adc_tm PM8350B_ADC7_GPIO2_100K_PU>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	xo-therm-usr {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;
		wake-capable-sensor;
		trips {
			active-config0 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};

			active-config1 {
				temperature = <125000>;
				hysteresis = <1000>;
				type = "passive";
			};
		};
	};

	xo-therm-step {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;

		trips {
			xo_config0: active-config0 {
				temperature = <78000>;
				hysteresis = <8000>;
				type = "passive";
			};

			xo_config1: active-config1 {
				temperature = <80000>;
				hysteresis = <10000>;
				type = "passive";
			};
		};
	};
};

&soc {
	reboot_reason {
		compatible = "qcom,reboot-reason";
		nvmem-cells = <&restart_reason>;
		nvmem-cell-names = "restart_reason";
	};
};

&soc {
	pmic-pon-log {
		compatible = "qcom,pmic-pon-log";
		nvmem = <&pmk8350_sdam_5>;
		nvmem-names = "pon_log";
	};
};