#include <dt-bindings/input/input.h>
#include <dt-bindings/input/qcom,qpnp-power-on.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/iio/qcom,spmi-adc5-gen3-pm5100.h>

&spmi_bus {
	#address-cells = <2>;
	#size-cells = <0>;
	interrupt-controller;
	#interrupt-cells = <4>;

	qcom,pm5100@0 {
		compatible = "qcom,spmi-pmic";
		reg = <0 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;

		pon_hlos@1300 {
			compatible = "qcom,qpnp-power-on";
			reg = <0x1300>;
			interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>,
				     <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
			interrupt-names = "kpdpwr", "resin";

			qcom,pon_1 {
				qcom,pon-type = <PON_POWER_ON_TYPE_KPDPWR>;
				linux,code = <KEY_POWER>;
			};

			qcom,pon_2 {
				qcom,pon-type = <PON_POWER_ON_TYPE_RESIN>;
				linux,code = <KEY_VOLUMEDOWN>;
			};
		};

		pm5100_tz: qcom,temp-alarm@a00 {
			compatible = "qcom,spmi-temp-alarm";
			reg = <0xa00>;
			interrupts = <0x0 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
			io-channels = <&pm5100_adc PM5100_ADC5_GEN3_DIE_TEMP>;
			io-channel-names = "thermal";
			#thermal-sensor-cells = <0>;
		};

		pm5100_adc: vadc@8000 {
			compatible = "qcom,spmi-adc5-gen3";
			reg = <0x8000>, <0x8300>;
			reg-names = "adc5-gen3-base", "adc5-gen3-debug-base";
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <0x0 0x80 0x1 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "adc";
			#io-channel-cells = <1>;
			status = "disabled";

			pm5100_ref_gnd {
				reg = <PM5100_ADC5_GEN3_OFFSET_REF>;
				label = "pm5100_ref_gnd";
				qcom,pre-scaling = <1 1>;
			};

			pm5100_vref_1p25 {
				reg = <PM5100_ADC5_GEN3_1P25VREF>;
				label = "pm5100_vref_1p25";
				qcom,pre-scaling = <1 1>;
			};

			pm5100_die_temp {
				reg = <PM5100_ADC5_GEN3_DIE_TEMP>;
				label = "pm5100_die_temp";
				qcom,pre-scaling = <1 1>;
			};

			pm5100_xo_therm {
				reg = <PM5100_ADC5_GEN3_AMUX1_THM_100K_PU>;
				label = "pm5100_xo_therm";
				qcom,ratiometric;
				qcom,hw-settle-time = <700>;
				qcom,pre-scaling = <1 1>;
			};

			pm5100_usb_in_i_uv {
				reg = <PM5100_ADC5_GEN3_USB_IN_I>;
				label = "pm5100_usb_in_i_uv";
				qcom,pre-scaling = <1 1>;
				qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_GEN3_USB_IN_I>;
			};

			pm5100_chg_temp {
				reg = <PM5100_ADC5_GEN3_CHG_TEMP>;
				label = "pm5100_chg_temp";
				qcom,pre-scaling = <1 1>;
				qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_CHG_TEMP>;
			};

			pm5100_usb_in_v {
				reg = <PM5100_ADC5_GEN3_USB_SNS_V_16>;
				label = "pm5100_usb_in_v";
				qcom,pre-scaling = <1 16>;
			};

			pm5100_boost_out_v {
				reg = <PM5100_ADC5_GEN3_VIN_DIV16_MUX>;
				label = "pm5100_boost_out_v";
				qcom,pre-scaling = <1 6>;
			};

			pm5100_bat_therm {
				reg = <PM5100_ADC5_GEN3_BATT_THM_100K_PU>;
				label = "pm5100_bat_therm";
				qcom,ratiometric;
				qcom,hw-settle-time = <200>;
				qcom,pre-scaling = <1 1>;
				qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_GEN3_BATT_THERM_100K>;
			};

			pm5100_bat_id {
				reg = <PM5100_ADC5_GEN3_BAT_ID_100K_PU>;
				label = "pm5100_bat_id";
				qcom,ratiometric;
				qcom,hw-settle-time = <200>;
				qcom,pre-scaling = <1 1>;
				qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_GEN3_BATT_ID_100K>;
			};

			pm5100_vph_pwr {
				reg = <PM5100_ADC5_GEN3_VPH_PWR>;
				label = "pm5100_vph_pwr";
				qcom,pre-scaling = <1 3>;
			};

			pm5100_vbat_sns {
				reg = <PM5100_ADC5_GEN3_VBAT_SNS_QBG>;
				label = "pm5100_vbat_sns";
				qcom,pre-scaling = <1 3>;
			};
		};

		pm5100_gpios: pinctrl@8800 {
			compatible = "qcom,pm5100-gpio";
			reg = <0x8800>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		pm5100_rtc: rtc@6400 {
			compatible = "qcom,pm5100-rtc";
			reg = <0x6400>, <0x6500>;
			reg-names = "rtc", "alarm";
			interrupts = <0x0 0x65 0x1 IRQ_TYPE_EDGE_RISING>;
		};

		pm5100_cdc: qcom,pm5100-cdc {
			compatible = "qcom,pm5100-spmi";
		};

		pm5100_bcl: bcl@4700 {
			compatible = "qcom,bcl-v5";
			reg = <0x4700 0x100>;
			interrupts = <0x0 0x47 0x0 IRQ_TYPE_NONE>,
					<0x0 0x47 0x1 IRQ_TYPE_NONE>,
					<0x0 0x47 0x2 IRQ_TYPE_NONE>;
			interrupt-names = "bcl-lvl0",
						"bcl-lvl1",
						"bcl-lvl2";
			qcom,pmic7-threshold;
			qcom,ibat-ccm-hw-support;
			#thermal-sensor-cells = <1>;
		};

		bcl_soc:bcl-soc {
			compatible = "qcom,msm-bcl-soc";
			#thermal-sensor-cells = <0>;
		};
	};
};

&thermal_zones {
	pm5100-tz {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm5100_tz>;

		trips {
			pm5100_trip0: trip0 {
				temperature = <95000>;
				hysteresis = <0>;
				type = "passive";
			};

			pm5100_trip1: trip1 {
				temperature = <115000>;
				hysteresis = <0>;
				type = "critical";
			};

			pm5100_trip2: trip2 {
				temperature = <145000>;
				hysteresis = <0>;
				type = "critical";
			};
		};
	};

	pm5100-ibat-lvl0 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm5100_bcl 0>;

		trips {
			ibat_lvl0:ibat-lvl0 {
				temperature = <1100>;
				hysteresis = <200>;
				type = "passive";
			};
		};
	};

	pm5100-ibat-lvl1 {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm5100_bcl 1>;

		trips {
			ibat_lvl1:ibat-lvl1 {
				temperature = <1500>;
				hysteresis = <200>;
				type = "passive";
			};
		};
	};

	pm5100-bcl-lvl0 {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm5100_bcl 5>;

		trips {
			bcl_lvl0: bcl-lvl0 {
				temperature = <1>;
				hysteresis = <1>;
				type = "passive";
			};
		};
	};

	pm5100-bcl-lvl1 {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm5100_bcl 6>;

		trips {
			bcl_lvl1: bcl-lvl1 {
				temperature = <1>;
				hysteresis = <1>;
				type = "passive";
			};
		};
	};

	pm5100-bcl-lvl2 {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm5100_bcl 7>;

		trips {
			bcl_lvl2: bcl-lvl2 {
				temperature = <1>;
				hysteresis = <1>;
				type = "passive";
			};
		};
	};

	socd {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&bcl_soc>;

		trips {
			socd_trip:socd-trip {
				temperature = <90>;
				hysteresis = <0>;
				type = "passive";
			};
		};
	};
};

&thermal_zones {
	pm5100_tz {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm5100_tz>;
		wake-capable-sensor;

		trips {
			pm5100_trip0: trip0 {
				temperature = <95000>;
				hysteresis = <0>;
				type = "passive";
			};

			pm5100_trip1: trip1 {
				temperature = <115000>;
				hysteresis = <0>;
				type = "critical";
			};

			trip2 {
				temperature = <145000>;
				hysteresis = <0>;
				type = "critical";
			};
		};
	};
};

&pm5100_gpios {
	pmx_sde: pmx_sde {
		sde_dsi_active: sde_dsi_active {
			mux {
				pins = "gpio1", "gpio2";
				function = "gpio";
			};

			config {
				pins = "gpio1", "gpio2";
				drive-strength = <8>;
				bias-disable = <0>;
			};
		};

		sde_dsi_suspend: sde_dsi_suspend {
			mux {
				pins = "gpio1", "gpio2";
				function = "gpio";
			};

			config {
				pins = "gpio1", "gpio2";
				drive-strength = <2>;
				bias-pull-down;
			};
		};
	};
};