#include<dt-bindings/pinctrl/qcom,pmic-gpio.h>

&soc {
	tlmm_pinmux: pinctrl@1000000 {
		compatible = "qcom,sdxnightjar-pinctrl";
		reg = <0x1000000 0x300000>;
		interrupts = <0 208 IRQ_TYPE_LEVEL_HIGH>;
		gpio-controller;
		#gpio-cells = <2>;
		interrupt-controller;
		#interrupt-cells = <2>;
		wakeup-parent = <&wakegic>;

		uart1_console_active: uart1_console_active {
			mux {
				pins = "gpio0", "gpio1";
				function = "blsp_uart1";
			};

			config {
				pins = "gpio0", "gpio1";
				drive-strength = <2>;
				bias-disable;
			};
		};

		trigout_a: trigout_a {
			mux {
				pins = "gpio92";
				function = "qdss_cti";
			};

			config {
				pins = "gpio92";
				drive-strength = <2>;
				bias-disable;
			};
		};

		uart2_console_active: uart2_console_active {
			mux {
				pins = "gpio4", "gpio5";
				function = "blsp_uart2";
			};

			config {
				pins = "gpio4", "gpio5";
				drive-strength = <2>;
				bias-disable;
			};
		};

		uart3_console_active: uart3_console_active {
			mux {
				pins = "gpio8", "gpio9";
				function = "blsp_uart3";
			};

			config {
				pins = "gpio8", "gpio9";
				drive-strength = <2>;
				bias-disable;
			};
		};

		uart3_console_sleep: uart3_console_sleep {
			mux {
				pins = "gpio8", "gpio9";
				function = "gpio";
			};

			config {
				pins = "gpio8", "gpio9";
				drive-strength = <2>;
				bias-disable;
			};
		};

		/* I2C CONFIGURATION */
		i2c_1 {
			i2c_1_active: i2c_1_active {
				mux {
					pins = "gpio2", "gpio3";
					function = "blsp_i2c1";
				};

				config {
					pins = "gpio2", "gpio3";
					drive-strength = <2>;
					bias-disable;
				};
			};

			i2c_1_sleep: i2c_1_sleep {
				mux {
					pins = "gpio2", "gpio3";
					function = "blsp_i2c1";
				};

				config {
					pins = "gpio2", "gpio3";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		i2c_2 {
			i2c_2_active: i2c_2_active {
				mux {
					pins = "gpio6", "gpio7";
					function = "blsp_i2c2";
				};

				config {
					pins = "gpio6", "gpio7";
					drive-strength = <2>;
					bias-disable;
				};
			};

			i2c_2_sleep: i2c_2_sleep {
				mux {
					pins = "gpio6", "gpio7";
					function = "blsp_i2c2";
				};

				config {
					pins = "gpio6", "gpio7";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		i2c_3 {
			i2c_3_active: i2c_3_active {
				mux {
					pins = "gpio10", "gpio11";
					function = "blsp_i2c3";
				};

				config {
					pins = "gpio10", "gpio11";
					drive-strength = <2>;
					bias-disable;
				};
			};

			i2c_3_sleep: i2c_3_sleep {
				mux {
					pins = "gpio10", "gpio11";
					function = "blsp_i2c3";
				};

				config {
					pins = "gpio10", "gpio11";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		i2c_4 {
			i2c_4_active: i2c_4_active {
				mux {
					pins = "gpio14", "gpio15";
					function = "blsp_i2c4";
				};

				config {
					pins = "gpio14", "gpio15";
					drive-strength = <2>;
					bias-disable;
				};
			};

			i2c_4_sleep: i2c_4_sleep {
				mux {
					pins = "gpio14", "gpio15";
					function = "blsp_i2c4";
				};

				config {
					pins = "gpio14", "gpio15";
					drive-strength = <2>;
					bias-pull-up;
				};
			};
		};

		bmi160_int1_default: bmi160_int1_default {
			     mux {
				     pins = "gpio0";
				     function = "gpio";
			     };

			     config {
				     pins = "gpio0";
				     drive-strength = <12>;
				     bias-pull-down;
			     };
		};

		bmi160_int2_default: bmi160_int2_default {
			     mux {
				     pins = "gpio1";
				     function = "gpio";
			     };

			     config {
				     pins = "gpio1";
				     drive-strength = <12>;
				     bias-pull-down;
			     };
		};

		cnss_pins {
			cnss_wlan_en_active: cnss_wlan_en_active {
				mux {
					pins = "gpio95";
					function = "gpio";
				};

				config {
					pins = "gpio95";
					drive-strength = <16>;
					output-high;
					bias-pull-up;
				};
			};

			cnss_wlan_en_sleep: cnss_wlan_en_sleep {
				mux {
					pins = "gpio95";
					function = "gpio";
				};

				config {
					pins = "gpio95";
					drive-strength = <2>;
					output-low;
					bias-pull-down;
				};
			};

			cnss_sdio_active: cnss_sdio_active {
				mux {
					pins = "gpio37";
					function = "gpio";
				};

				config {
					pins = "gpio37";
					drive-strength = <16>;
					output-high;
					bias-pull-up;
				};
			};

			cnss_sdio_sleep: cnss_sdio_sleep {
				mux {
					pins = "gpio37";
					function = "gpio";
				};

				config {
					pins = "gpio37";
					drive-strength = <2>;
					output-low;
					bias-pull-down;
				};
			};
		};

		/* SPI CONFIGURATION */
		spi_1 {
			spi_1_active: spi_1_active {
				mux {
					pins = "gpio0", "gpio1", "gpio2",
						"gpio3";
					function = "blsp_spi1";
				};

				config {
					pins = "gpio0", "gpio1", "gpio2",
						"gpio3";
					drive-strength = <6>;
					bias-disable;
				};
			};

			spi_1_sleep: spi_1_sleep {
				mux {
					pins = "gpio0", "gpio1", "gpio2",
						"gpio3";
					function = "blsp_spi1";
				};

				config {
					pins = "gpio0", "gpio1", "gpio2",
						"gpio3";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		spi_2 {
			spi_2_active: spi_2_active {
				mux {
					pins = "gpio4", "gpio5", "gpio6",
						"gpio7";
					function = "blsp_spi2";
				};

				config {
					pins = "gpio4", "gpio5", "gpio6",
						"gpio7";
					drive-strength = <6>;
					bias-disable;
				};
			};

			spi_2_sleep: spi_2_sleep {
				mux {
					pins = "gpio4", "gpio5", "gpio6",
						"gpio7";
					function = "blsp_spi2";
				};

				config {
					pins = "gpio4", "gpio5", "gpio6",
						"gpio7";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		spi_3 {
			spi_3_active: spi_3_active {
				mux {
					pins = "gpio8", "gpio9", "gpio10",
						"gpio11";
					function = "blsp_spi3";
				};

				config {
					pins = "gpio8", "gpio9", "gpio10",
						"gpio11";
					drive-strength = <6>;
					bias-disable;
				};
			};

			spi_3_sleep: spi_3_sleep {
				mux {
					pins = "gpio8", "gpio9", "gpio10",
						"gpio11";
					function = "blsp_spi3";
				};

				config {
					pins = "gpio8", "gpio9", "gpio10",
						"gpio11";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		spi_4 {
			spi_4_active: spi_4_active {
				mux {
					pins = "gpio16", "gpio17", "gpio18",
						"gpio19";
					function = "blsp_spi4";
				};

				config {
					pins = "gpio16", "gpio17", "gpio18",
						"gpio19";
					drive-strength = <6>;
					bias-disable;
				};
			};

			spi_4_sleep: spi_4_sleep {
				mux {
					pins = "gpio16", "gpio17", "gpio18",
						"gpio19";
					function = "blsp_spi4";
				};

				config {
					pins = "gpio16", "gpio17", "gpio18",
						"gpio19";
					drive-strength = <6>;
					bias-disable;
				};
			};
		};

		sdc2_on: sdc2_on {
			clk {
				pins = "sdc1_clk";
				bias-disable;
				drive-strength = <16>;
			};

			cmd {
				pins = "sdc1_cmd";
				bias-pull-up;
				drive-strength = <10>;
			};

			data {
				pins = "sdc1_data";
				bias-pull-up;
				drive-strength = <10>;
			};
		};

		sdc2_off: sdc2_off {
			clk {
				pins = "sdc1_clk";
				bias-disable;
				drive-strength = <2>;
			};

			cmd {
				pins = "sdc1_cmd";
				bias-pull-up;
				drive-strength = <2>;
			};

			data {
				pins = "sdc1_data";
				bias-pull-up;
				drive-strength = <2>;
			};
		};

		sdc2_wlan_gpio {
			sdc2_wlan_gpio_active: sdc2_wlan_gpio_active {
				mux {
					pins = "gpio80";
					function  = "gpio";
				};

				config {
					pins  = "gpio80";
					output-high;
					drive-strength = <8>;
					bias-pull-up;
				};
			};

			sdc2_wlan_gpio_sleep: sdc2_wlan_gpio_sleep {
				mux {
					pins = "gpio80";
					function  = "gpio";
				};

				config {
					pins  = "gpio80";
					drive-strength = <2>;
					bias-pull-down;
					output-low;
				};
			};
		};

		/* SMB CONFIGURATION */
		pmx_smb_stat {
			smb_stat_active: smb_stat_active {
				mux {
					pins = "gpio83";
					function = "gpio";
				};

				config {
					pins = "gpio83";
					drive-strength = <2>;
					bias-disable;
				};
			};
		};

		pcie0 {
			pcie0_clkreq_default: pcie0_clkreq_default {
				mux {
					pins = "gpio64";
					function = "pcie_clkreq";
				};

				config {
					pins = "gpio64";
					drive-strength = <2>;
					bias-pull-up;
				};
			};

			pcie0_perst_default: pcie0_perst_default {
				mux {
					pins = "gpio60";
					function = "gpio";
				};

				config {
					pins = "gpio60";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			pcie0_wake_default: pcie0_wake_default {
				mux {
					pins = "gpio61";
					function = "gpio";
				};

				config {
					pins = "gpio61";
					drive-strength = <2>;
					bias-disable;
				};
			};

			pcie0_mdm2apstatus_default: pcie0_mdm2apstatus_default {
				mux {
					pins = "gpio16";
					function = "gpio";
				};

				config {
					pins = "gpio16";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			pcie_ep_perst_default: pcie_ep_perst_default {
				mux {
					pins = "gpio65";
					function = "gpio";
				};

				config {
					pins = "gpio65";
					drive-strength = <2>;
					bias-pull-down;
				};
			};

			pcie_ep_wake_default: pcie_ep_wake_default {
				mux {
					pins = "gpio61";
					function = "gpio";
				};

				config {
					pins = "gpio61";
					drive-strength = <2>;
					bias-pull-down;
				};
			};
		};

		/* UART HS CONFIGURATION */
		blsp1_uart1_active: blsp1_uart1_active {
			mux {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				function = "blsp_uart1";
			};

			config {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				drive-strength = <2>;
				bias-disable;
			};
		};

		blsp1_uart1_sleep: blsp1_uart1_sleep {
			mux {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				function = "gpio";
			};

			config {
				pins = "gpio0", "gpio1", "gpio2", "gpio3";
				drive-strength = <2>;
				bias-disable;
			};
		};

		blsp1_uart2_active: blsp1_uart2_active {
			mux {
				pins = "gpio4", "gpio5", "gpio6", "gpio7";
				function = "blsp_uart2";
			};

			config {
				pins = "gpio4", "gpio5", "gpio6", "gpio7";
				drive-strength = <2>;
				bias-disable;
			};
		};

		blsp1_uart2_sleep: blsp1_uart2_sleep {
			mux {
				pins = "gpio4", "gpio5", "gpio6", "gpio7";
				function = "gpio";
			};

			config {
				pins = "gpio4", "gpio5", "gpio6", "gpio7";
				drive-strength = <2>;
				bias-disable;
			};
		};

		blsp1_uart3_active: blsp1_uart3_active {
			mux {
				pins = "gpio8", "gpio9", "gpio10", "gpio11";
				function = "blsp_uart3";
			};

			config {
				pins = "gpio8", "gpio9", "gpio10", "gpio11";
				drive-strength = <2>;
				bias-disable;
			};
		};

		blsp1_uart3_sleep: blsp1_uart3_sleep {
			mux {
				pins = "gpio8", "gpio9", "gpio10", "gpio11";
				function = "gpio";
			};

			config {
				pins = "gpio8", "gpio9", "gpio10", "gpio11";
				drive-strength = <2>;
				bias-disable;
			};
		};

		blsp1_uart4_active: blsp1_uart4_active {
			mux {
				pins = "gpio12", "gpio13", "gpio14", "gpio15";
				function = "blsp_uart4";
			};

			config {
				pins = "gpio12", "gpio13", "gpio14", "gpio15";
				drive-strength = <2>;
				bias-disable;
			};
		};

		blsp1_uart4_sleep: blsp1_uart4_sleep {
			mux {
				pins = "gpio12", "gpio13", "gpio14", "gpio15";
				function = "gpio";
			};

			config {
				pins = "gpio12", "gpio13", "gpio14", "gpio15";
				drive-strength = <2>;
				bias-disable;
			};
		};

		blsp1_uart4b_active: blsp1_uart4b_active {
			mux {
				pins = "gpio16", "gpio17", "gpio18", "gpio19";
				function = "blsp_uart4";
			};

			config {
				pins = "gpio16", "gpio17", "gpio18", "gpio19";
				drive-strength = <2>;
				bias-disable;
			};
		};

		blsp1_uart4b_sleep: blsp1_uart4b_sleep {
			mux {
				pins = "gpio16", "gpio17", "gpio18", "gpio19";
				function = "gpio";
			};

			config {
				pins = "gpio16", "gpio17", "gpio18", "gpio19";
				drive-strength = <2>;
				bias-disable;
			};
		};

		mdss_cs_active: mdss_cs_active {
			mux {
				pins = "gpio21";
				function = "ebi2_lcd";
			};

			config {
				pins = "gpio21";
				drive-strength = <10>; /* 10 mA */
				bias-disable; /* NO pull */
			};
		};

		mdss_cs_sleep: mdss_cs_sleep {
			mux {
				pins = "gpio21";
				function = "ebi2_lcd";
			};

			config {
				pins = "gpio21";
				drive-strength = <2>; /* 2 mA */
				bias-disable; /* NO pull */
			};
		};

		mdss_te_active: mdss_te_active {
			mux {
				pins = "gpio22";
				function = "ebi2_lcd";
			};

			config {
				pins = "gpio22";
				drive-strength = <10>; /* 10 mA */
				bias-disable; /* NO pull */
			};
		};

		mdss_te_sleep: mdss_te_sleep {
			mux {
				pins = "gpio22";
				function = "ebi2_lcd";
			};

			config {
				pins = "gpio22";
				drive-strength = <2>; /* 2 mA */
				bias-disable; /* NO pull */
			};
		};

		mdss_rs_active: mdss_rs_active {
			mux {
				pins = "gpio23";
				function = "ebi2_lcd";
			};

			config {
				pins = "gpio23";
				drive-strength = <10>; /* 10 mA */
				bias-disable; /* NO pull */
			};
		};

		mdss_rs_sleep: mdss_rs_sleep {
			mux {
				pins = "gpio23";
				function = "ebi2_lcd";
			};

			config {
				pins = "gpio23";
				drive-strength = <2>; /* 2 mA */
				bias-disable; /* NO pull */
			};
		};

		mdss_ad_active: mdss_ad_active {
			mux {
				pins = "gpio20";
				function = "ebi2_a";
			};

			config {
				pins = "gpio20";
				drive-strength = <10>; /* 10 mA */
				bias-disable; /* NO pull */
			};
		};

		mdss_ad_sleep: mdss_ad_sleep {
			mux {
				pins = "gpio20";
				function = "ebi2_a";
			};

			config {
				pins = "gpio20";
				drive-strength = <2>; /* 2 mA */
				bias-disable; /* NO pull */
			};
		};

		mdss_bl_active: mdss_bl_active {
			mux {
				pins = "gpio68";
				function = "gpio";
			};

			config {
				pins = "gpio68";
				drive-strength = <10>; /* 10 mA */
				bias-disable; /* NO pull */
				output-high;
			};
		};

		mdss_bl_sleep: mdss_bl_sleep {
			mux {
				pins = "gpio68";
				function = "gpio";
			};

			config {
				pins = "gpio68";
				drive-strength = <2>; /* 2 mA */
				bias-disable; /* NO pull */
				output-low;
			};
		};

		wcd9xxx_intr {
			wcd_intr_default: wcd_intr_default {
				mux {
					pins = "gpio94";
					function = "gpio";
				};

				config {
					pins = "gpio94";
					drive-strength = <2>; /* 2 mA */
					bias-pull-down; /* pull down */
					input-enable;
				};
			};
		};

		spkr_1_wcd {
			spkr_1_wcd_en_active: spkr_1_wcd_en_active {
				mux {
					pins = "gpio81";
					function = "gpio";
				};

				config {
					pins = "gpio81";
					drive-strength = <16>;   /* 16 mA */
					bias-disable;
					output-high;
				};
			};

			spkr_1_wcd_en_sleep: spkr_1_wcd_en_sleep {
				mux {
					pins = "gpio81";
					function = "gpio";
				};

				config {
					pins = "gpio81";
					drive-strength = <2>;   /* 2 mA */
					bias-pull-down;
					input-enable;
				};
			};
		};

		i2s_mclk {
			i2s_mclk_sleep: i2s_mclk_sleep {
				mux {
					pins = "gpio71";
					function = "i2s_mclk";
				};

				config {
					pins = "gpio71";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
				};
			};

			i2s_mclk_active: i2s_mclk_active {
				mux {
					pins = "gpio71";
					function = "i2s_mclk";
				};

				config {
					pins = "gpio71";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
					output-high;
				};
			};

		};

		pmx_pri_mi2s_aux {
			pri_ws_sleep: pri_ws_sleep {
				mux {
					pins = "gpio12";
					function = "gpio";
				};

				config {
					pins = "gpio12";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			pri_sck_sleep: pri_sck_sleep {
				mux {
					pins = "gpio15";
					function = "gpio";
				};

				config {
					pins = "gpio15";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			pri_dout_sleep: pri_dout_sleep {
				mux {
					pins = "gpio14";
					function = "gpio";
				};

				config {
					pins = "gpio14";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			pri_ws_active_master: pri_ws_active_master {
				mux {
					pins = "gpio12";
					function = "pri_mi2s_ws_a";
				};

				config {
					pins = "gpio12";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
					output-high;
				};
			};

			pri_sck_active_master: pri_sck_active_master {
				mux {
					pins = "gpio15";
					function = "pri_mi2s_sck_a";
				};

				config {
					pins = "gpio15";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
					output-high;
				};
			};

			pri_ws_active_slave: pri_ws_active_slave {
				mux {
					pins = "gpio12";
					function = "pri_mi2s_ws_a";
				};

				config {
					pins = "gpio12";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
				};
			};

			pri_sck_active_slave: pri_sck_active_slave {
				mux {
					pins = "gpio15";
					function = "pri_mi2s_sck_a";
				};

				config {
					pins = "gpio15";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
				};
			};

			pri_dout_active: pri_dout_active {
				mux {
					pins = "gpio14";
					function = "pri_mi2s_data1_a";
				};

				config {
					pins = "gpio14";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
					output-high;
				};
			};
		};

		pmx_pri_mi2s_aux_din {
			pri_din_sleep: pri_din_sleep {
				mux {
					pins = "gpio13";
					function = "gpio";
				};

				config {
					pins = "gpio13";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			pri_din_active: pri_din_active {
				mux {
					pins = "gpio13";
					function = "pri_mi2s_data0_a";
				};

				config {
					pins = "gpio13";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL */
				};
			};
		};

		pmx_sec_mi2s_aux {
			sec_ws_sleep: sec_ws_sleep {
				mux {
					pins = "gpio16";
					function = "gpio";
				};

				config {
					pins = "gpio16";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			sec_sck_sleep: sec_sck_sleep {
				mux {
					pins = "gpio19";
					function = "gpio";
				};

				config {
					pins = "gpio19";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			sec_dout_sleep: sec_dout_sleep {
				mux {
					pins = "gpio18";
					function = "gpio";
				};

				config {
					pins = "gpio18";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			sec_ws_active_master: sec_ws_active_master {
				mux {
					pins = "gpio16";
					function = "sec_mi2s_ws_a";
				};

				config {
					pins = "gpio16";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
					output-high;
				};
			};

			sec_sck_active_master: sec_sck_active_master {
				mux {
					pins = "gpio19";
					function = "sec_mi2s_sck_a";
				};

				config {
					pins = "gpio19";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
					output-high;
				};
			};

			sec_ws_active_slave: sec_ws_active_slave {
				mux {
					pins = "gpio16";
					function = "sec_mi2s_ws_a";
				};

				config {
					pins = "gpio16";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
				};
			};

			sec_sck_active_slave: sec_sck_active_slave {
				mux {
					pins = "gpio19";
					function = "sec_mi2s_sck_a";
				};

				config {
					pins = "gpio19";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
				};
			};

			sec_dout_active: sec_dout_active {
				mux {
					pins = "gpio18";
					function = "sec_mi2s_data1_a";
				};

				config {
					pins = "gpio18";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
					output-high;
				};
			};
		};

		pmx_sec_mi2s_aux_din {
			sec_din_sleep: sec_din_sleep {
				mux {
					pins = "gpio17";
					function = "gpio";
				};

				config {
					pins = "gpio17";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			sec_din_active: sec_din_active {
				mux {
					pins = "gpio17";
					function = "sec_mi2s_data0_a";
				};

				config {
					pins = "gpio17";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL */
				};
			};
		};

		pmx_sec_mi2s_b_aux {
			sec_ws_b_sleep: sec_ws_b_sleep {
				mux {
					pins = "gpio20";
					function = "gpio";
				};

				config {
					pins = "gpio20";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			sec_sck_b_sleep: sec_sck_b_sleep {
				mux {
					pins = "gpio23";
					function = "gpio";
				};

				config {
					pins = "gpio23";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			sec_dout_b_sleep: sec_dout_b_sleep {
				mux {
					pins = "gpio22";
					function = "gpio";
				};

				config {
					pins = "gpio22";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			sec_ws_b_active_master: sec_ws_b_active_master {
				mux {
					pins = "gpio20";
					function = "sec_mi2s_ws_b";
				};

				config {
					pins = "gpio20";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
					output-high;
				};
			};

			sec_sck_b_active_master: sec_sck_b_active_master {
				mux {
					pins = "gpio23";
					function = "sec_mi2s_sck_b";
				};

				config {
					pins = "gpio23";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
					output-high;
				};
			};

			sec_ws_b_active_slave: sec_ws_b_active_slave {
				mux {
					pins = "gpio20";
					function = "sec_mi2s_ws_b";
				};

				config {
					pins = "gpio20";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
				};
			};

			sec_sck_b_active_slave: sec_sck_b_active_slave {
				mux {
					pins = "gpio23";
					function = "sec_mi2s_sck_b";
				};

				config {
					pins = "gpio23";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
				};
			};

			sec_dout_b_active: sec_dout_b_active {
				mux {
					pins = "gpio22";
					function = "sec_mi2s_data1_b";
				};

				config {
					pins = "gpio22";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL*/
					output-high;
				};
			};
		};

		pmx_sec_mi2s_b_aux_din {
			sec_din_b_sleep: sec_din_b_sleep {
				mux {
					pins = "gpio21";
					function = "gpio";
				};

				config {
					pins = "gpio21";
					drive-strength = <2>;	/* 2 mA */
					bias-pull-down;		/* PULL DOWN */
					input-enable;
				};
			};

			sec_din_b_active: sec_din_b_active {
				mux {
					pins = "gpio21";
					function = "sec_mi2s_data0_b";
				};

				config {
					pins = "gpio21";
					drive-strength = <8>;	/* 8 mA */
					bias-disable;		/* NO PULL */
				};
			};
		};

		sdc1_clk_on: sdc1_clk_on {
			config {
				pins = "sdc1_clk";
				bias-disable;		/* NO pull */
				drive-strength = <16>;	/* 16 MA */
			};
		};

		sdc1_clk_off: sdc1_clk_off {
			config {
				pins = "sdc1_clk";
				bias-disable;		/* NO pull */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		cdc_reset_ctrl {
			cdc_reset_sleep: cdc_reset_sleep {
				mux {
					pins = "gpio90";
					function = "gpio";
				};

				config {
					pins = "gpio90";
					drive-strength = <2>;
					bias-disable;
					output-low;
				};
			};

			cdc_reset_active:cdc_reset_active {
				mux {
					pins = "gpio90";
					function = "gpio";
				};

				config {
					pins = "gpio90";
					drive-strength = <8>;
					bias-pull-down;
					output-high;
				};
			};
		};


		sdc1_cmd_on: sdc1_cmd_on {
			config {
				pins = "sdc1_cmd";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc1_cmd_off: sdc1_cmd_off {
			config {
				pins = "sdc1_cmd";
				num-grp-pins = <1>;
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc1_data_on: sdc1_data_on {
			config {
				pins = "sdc1_data";
				bias-pull-up;		/* pull up */
				drive-strength = <10>;	/* 10 MA */
			};
		};

		sdc1_data_off: sdc1_data_off {
			config {
				pins = "sdc1_data";
				bias-pull-up;		/* pull up */
				drive-strength = <2>;	/* 2 MA */
			};
		};

		sdc1_wlan_gpio {
			sdc1_wlan_gpio_active: sdc1_wlan_gpio_active {
				mux {
					pins = "gpio80";
					function  = "gpio";
				};

				config {
					pins  = "gpio80";
					output-high;
					drive-strength = <8>;
					bias-pull-up;
				};
			};

			sdc1_wlan_gpio_sleep: sdc1_wlan_gpio_sleep {
				mux {
					pins = "gpio80";
					function  = "gpio";
				};

				config {
					pins  = "gpio80";
					drive-strength = <2>;
					bias-pull-down;
					output-low;
				};
			};
		};

		pinctrl_pps: ppsgrp {
			mux {
				pins = "gpio39";
				function = "nav_dr";
			};

			config {
				pins = "gpio39";
				bias-pull-down;
			};
		};

		can_reset {
			can_rst_on: rst_on {
				mux {
					pins = "gpio68";
					function = "gpio";
				};


				config {
					pins = "gpio68";
					drive-strength = <2>; /* 2 mA */
					bias-pull-up;
				};
			};

			can_rst_off: rst_off {
				mux {
					pins = "gpio68";
					function = "gpio";
				};

				config {
					pins = "gpio68";
					drive-strength = <2>; /* 2 mA */
					bias-pull-up;
					output-high;
				};
			};
		};
	};
};

&pmd9650_gpios {
	gpio@c100 { /* GPIO 2 - VADC */
		/* GPIO should be left off, and in the high
		 * impedance state when the pin is used with the VADC
		 */
		pins = "gpio2";
		function = "normal";
		bias-high-impedance;   /* DISABLE GPIO */
	};

	gpio@c200 { /* GPIO 3 - LED */
		pins = "gpio3";
		function = "normal";
		bias-high-impedance;   /* DISABLE GPIO */
	};

	usb_id_detect: gpio@c400 { /* GPIO 5 - USB_ID */
		pins = "gpio5";
		function = "normal";
		input-enable;        /* Digital input */
		bias-pull-up;
		qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_1P5>;	/* Pull up 1.5 uA */
		power-source = <1>;     /* 1.8 V */
	};

	gpio@c500 { /* GPIO 6 - Rome 3.3V control */
		status = "ok";
		qcom,mode = <1>;		/* Digital output*/
		qcom,output-type = <0>;		/* CMOS logic */
		qcom,invert = <1>;		/* Output high */
		qcom,vin-sel = <0>;		/* VPH_PWR */
		qcom,src-sel = <0>;		/* Constant */
		qcom,out-strength = <1>;	/* High drive strength */
		qcom,master-en = <1>;		/* Enable GPIO */
	};
};