A-Team_Digital_Solutions/android_kernel_motorola_sm6375
Watch
2
0
Fork
You've already forked android_kernel_motorola_sm6375
 0
mirror of https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git synced 2026-10-28 02:32:09 -04:00
Code Issues Projects Releases Packages Wiki Activity
android_kernel_motorola_sm6375/qcom/holi-pmic-overlay-pm6125.dtsi
Ashish Chavan 570a6d1c71 ARM: dts: msm: Enable KPDPWR status logging 
Enable  KPDPWR status logging for holi-pm6125 and blair platforms.

Change-Id: I68f0db9943f879a0347ec5a1aa57dd0cf5a7b05a
2021-09-27 14:26:24 +05:30

499 lines
10 KiB
Devicetree
Raw Blame History

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "pm6125.dtsi"
#include "pmr735a.dtsi"
#define PMK8350_SID 6
#include "pmk8350.dtsi"
&pmr735a_gpios {
key_vol_up {
key_vol_up_default: key_vol_up_default {
pins = "gpio1";
function = "normal";
input-enable;
bias-pull-up;
power-source = <1>;
};
};
};
&spmi_bus {
qcom,pmr735a@4 {
/* Example configuration to enable PMR735A VADC in standalone mode */
pmr735a_vadc: vadc@3600 {
compatible = "qcom,spmi-adc7-sw-calib";
reg = <0x3600>, <0x3900>;
reg-names = "adc5-sw-calib-pbs-base", "adc5-sw-calib-cmn-base";
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0x4 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "eoc";
#io-channel-cells = <1>;
io-channel-ranges;
status = "disabled";
/* PMR735a Channel nodes */
pmr735a_ref_gnd {
reg = <ADC7_REF_GND>;
label = "pmr735a_ref_gnd";
qcom,pre-scaling = <1 1>;
qcom,no-cal;
};
pmr735a_vref_1p25 {
reg = <ADC7_1P25VREF>;
label = "pmr735a_vref_1p25";
qcom,pre-scaling = <1 1>;
qcom,no-cal;
};
pmr735a_vref_vdd {
reg = <ADC7_VREF_VADC>;
label = "pmr735a_vref_vdd";
qcom,pre-scaling = <1 1>;
qcom,no-cal;
};
pmr735a_die_temp {
reg = <ADC7_DIE_TEMP>;
label = "pmr735a_die_temp";
qcom,pre-scaling = <1 1>;
};
};
};
};
&pm6125_vadc {
pinctrl-names = "default";
pinctrl-0 = <
&pa_therm2_default
&msm_therm_default
&rfc_cam_therm_default
&rear_cam_flash_therm_default>;
/delete-node/ xo_therm;
pa_therm1 {
reg = <ADC5_AMUX_THM1_100K_PU>;
label = "pa_therm1";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
quiet_therm {
reg = <ADC5_AMUX_THM2_100K_PU>;
label = "quiet_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pa_therm2 {
reg = <ADC5_GPIO4_100K_PU>;
label = "pa_therm2";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
msm_therm {
reg = <ADC5_GPIO1_100K_PU>;
label = "msm_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
rfc_cam_therm {
reg = <ADC5_GPIO2_100K_PU>;
label = "rfc_cam_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
rear_cam_flash_therm {
reg = <ADC5_GPIO3_100K_PU>;
label = "rear_cam_flash_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pm6125_gpios {
pa_therm2 {
pa_therm2_default: pa_therm2_default {
pins = "gpio7";
bias-high-impedance;
};
};
msm_therm {
msm_therm_default: msm_therm_default {
pins = "gpio3";
bias-high-impedance;
};
};
rfc_cam_therm {
rfc_cam_therm_default: rfc_cam_therm_default {
pins = "gpio4";
bias-high-impedance;
};
};
rear_cam_flash_therm {
rear_cam_flash_therm_default: rear_cam_flash_therm_default {
pins = "gpio6";
bias-high-impedance;
};
};
};
&pm6125_adc_tm {
io-channels = <&pm6125_vadc ADC5_GPIO4_100K_PU>,
<&pm6125_vadc ADC5_AMUX_THM1_100K_PU>,
<&pm6125_vadc ADC5_GPIO3_100K_PU>,
<&pm6125_vadc ADC5_AMUX_THM2_100K_PU>;
/* Channel nodes */
pa_therm2 {
reg = <ADC5_GPIO4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pa_therm1 {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
rear_cam_flash_therm {
reg = <ADC5_GPIO3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
quiet_therm {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&spmi_bus {
qcom,pm6125@0 {
pm6125_adc_tm_iio: adc_tm@3400 {
compatible = "qcom,adc-tm5-iio";
reg = <0x3400>;
#thermal-sensor-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
io-channels = <&pm6125_vadc ADC5_GPIO1_100K_PU>,
<&pm6125_vadc ADC5_GPIO2_100K_PU>;
msm_therm {
reg = <ADC5_GPIO1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
rfc_cam_therm {
reg = <ADC5_GPIO2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
};
};
&pmk8350 {
reg = <6 SPMI_USID>;
pon_pbs@800 {
status = "disabled";
};
pon_hlos@1300 {
status = "disabled";
};
};
&pmk8350_rtc {
interrupts = <0x6 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
};
&pmk8350_vadc {
interrupts = <0x6 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
/delete-node/ pm8350_ref_gnd;
/delete-node/ pm8350_vref_1p25;
/delete-node/ pm8350_die_temp;
/delete-node/ pm8350_vph_pwr;
/delete-node/ pm8350b_ref_gnd;
/delete-node/ pm8350b_vref_1p25;
/delete-node/ pm8350b_die_temp;
/delete-node/ pm8350b_vph_pwr;
/delete-node/ pm8350b_vbat_sns;
/delete-node/ pmr735a_ref_gnd;
/delete-node/ pmr735a_vref_1p25;
/delete-node/ pmr735a_die_temp;
/delete-node/ pmr735b_ref_gnd;
/delete-node/ pmr735b_vref_1p25;
/delete-node/ pmr735b_die_temp;
};
&pmk8350_adc_tm {
interrupts = <0x6 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
xo_therm {
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&thermal_zones {
sdm-skin-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm6125_adc_tm_iio ADC5_GPIO1_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
rear-cam-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm6125_adc_tm_iio ADC5_GPIO2_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
camera-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm6125_adc_tm ADC5_GPIO3_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
quiet-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm6125_adc_tm ADC5_AMUX_THM2_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
pa-therm0-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm6125_adc_tm ADC5_AMUX_THM1_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
pa-therm1-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm6125_adc_tm ADC5_GPIO4_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
xo-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
/*
* Each QUP device that's a parent to PMIC must be listed as a critical device
* to GCC
*/
&gcc {
qcom,critical-devices = <&qupv3_se10_i2c>;
};
&qupv3_se10_i2c {
#address-cells = <1>;
#size-cells = <0>;
status = "ok"
qcom,leica-used-i2c;
pm8008_8: qcom,pm8008@8 {
compatible = "qcom,i2c-pmic";
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pm8008_active>;
pm8008_chip: qcom,pm8008-chip@900 {
compatible = "qcom,pm8008-chip";
reg = <0x900>;
PM8008_EN: qcom,pm8008-chip-en {
regulator-name = "pm8008-chip-en";
};
};
qcom,revid@100 {
compatible = "qcom,qpnp-revid";
reg = <0x100>;
};
};
pm8008_9: qcom,pm8008@9 {
compatible = "qcom,i2c-pmic";
reg = <0x9>;
#address-cells = <1>;
#size-cells = <0>;
pm8008_regulators: qcom,pm8008-regulator {
compatible = "qcom,pm8008-regulator";
#address-cells = <1>;
#size-cells = <0>;
pm8008_en-supply = <&PM8008_EN>;
vdd_l1_l2-supply = <&S6A>;
vdd_l6-supply = <&S7A>;
L1P: qcom,pm8008-l1@4000 {
reg = <0x4000>;
regulator-name = "pm8008_l1";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
qcom,min-dropout-voltage = <56000>;
qcom,hpm-min-load = <0>;
};
L2P: qcom,pm8008-l2@4100 {
reg = <0x4100>;
regulator-name = "pm8008_l2";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1150000>;
qcom,min-dropout-voltage = <96000>;
qcom,hpm-min-load = <0>;
};
L3P: qcom,pm8008-l3@4200 {
reg = <0x4200>;
regulator-name = "pm8008_l3";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2900000>;
qcom,min-dropout-voltage = <168000>;
qcom,hpm-min-load = <0>;
};
L4P: qcom,pm8008-l4@4300 {
reg = <0x4300>;
regulator-name = "pm8008_l4";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2900000>;
qcom,min-dropout-voltage = <136000>;
qcom,hpm-min-load = <0>;
};
L5P: qcom,pm8008-l5@4400 {
reg = <0x4400>;
regulator-name = "pm8008_l5";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2900000>;
qcom,min-dropout-voltage = <240000>;
qcom,hpm-min-load = <0>;
};
L6P: qcom,pm8008-l6@4400 {
reg = <0x4500>;
regulator-name = "pm8008_l6";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1900000>;
qcom,min-dropout-voltage = <48000>;
qcom,hpm-min-load = <0>;
};
L7P: qcom,pm8008-l7@4400 {
reg = <0x4600>;
regulator-name = "pm8008_l7";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2900000>;
qcom,min-dropout-voltage = <96000>;
qcom,hpm-min-load = <0>;
};
};
};
};
&pm6125_pon {
qcom,log-kpd-event;
};
Reference in a new issue View git blame Copy permalink