Sascha Hauer
0d3c3938ff
[ARM] 4995/1: <IMX UART>: Do not use URXD_CHARRDY for polling
...
Do not use the URXD_CHARRDY bit for polling for new characters. This works
on i.MX1, but on MX31 the datasheet states that this bit should not be
used for polling. On MX27 it is even worse, here we get a bus error when
we access the read FIFO when no character is present.
Instead, use USR2_RDR (receive data ready) bit.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-17 16:18:20 +01:00
..
cpm_uart
Remove pointless casts from void pointers
2008-02-06 10:41:01 -08:00
jsm
jsm: Remove further unneeded crud
2007-10-17 08:42:52 -07:00
8250.c
8250: enable rate reporting via termios
2008-02-08 09:22:25 -08:00
8250.h
8250_accent.c
8250_acorn.c
8250_au1x00.c
8250_boca.c
8250_early.c
8250_early: coding style
2008-02-08 09:22:25 -08:00
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c
8250_gsc: coding style
2008-02-08 09:22:25 -08:00
8250_hp300.c
8250_hp300: coding style
2008-02-08 09:22:25 -08:00
8250_hub6.c
8250_hub6: codding style
2008-02-08 09:22:25 -08:00
8250_mca.c
8250_pci.c
8250_pci: coding style
2008-02-08 09:22:25 -08:00
8250_pnp.c
serial: add PNP ID GVC0303 for Archtek 3334BRV ISA modem
2008-03-04 16:35:09 -08:00
21285.c
[ARM] 21285 serial: fix build error
2008-02-04 13:14:06 +00:00
68328serial.c
Char: char/serial, remove SERIAL_TYPE_NORMAL redefines
2008-02-07 08:42:33 -08:00
68328serial.h
68360serial.c
amba-pl010.c
amba-pl011.c
amba-pl011, rename BIT macro
2007-10-19 11:53:42 -07:00
atmel_serial.c
atmel_serial: fix interrupt handler return value
2008-02-23 17:12:14 -08:00
bfin_5xx.c
Blackfin Serial Driver: Fix bug - Only insert UART rx char in timer task.
2008-02-29 12:08:42 +08:00
clps711x.c
crisv10.c
Char: char/serial, remove SERIAL_TYPE_NORMAL redefines
2008-02-07 08:42:33 -08:00
crisv10.h
CRISv10 serial driver rewrite
2007-11-14 18:45:46 -08:00
dz.c
dz.c: Resource management
2008-02-07 08:42:24 -08:00
dz.h
dz: clean up and improve the setup of termios settings
2008-02-07 08:42:24 -08:00
icom.c
kobject: convert icom to use kref, not kobject
2008-01-24 20:40:09 -08:00
icom.h
Coding style fix drivers/serial/icom.h
2008-02-03 14:47:38 +02:00
imx.c
[ARM] 4995/1: <IMX UART>: Do not use URXD_CHARRDY for polling
2008-04-17 16:18:20 +01:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
IP22ZILOG: fix lockup and sysrq
2007-11-29 09:24:53 -08:00
ip22zilog.h
Kconfig
atmel_serial: add DMA support
2008-02-08 09:22:37 -08:00
m32r_sio.c
drivers/serial/m32r_sio.c: correct use of ! and &
2008-03-04 16:35:16 -08:00
m32r_sio.h
m32r: serial: remove M32R_SIO_SHARE_IRQS
2007-10-16 09:43:04 -07:00
m32r_sio_reg.h
Makefile
SC26XX: New serial driver for SC2681 uarts
2008-02-06 10:41:06 -08:00
mcf.c
m68knommu: use ARRAY_SIZE in ColdFire serial driver
2008-02-05 09:44:21 -08:00
mcfserial.c
mcfserial.h
mpc52xx_uart.c
[POWERPC] mpc52xx: fix compile error introduce when rebasing patch
2008-02-06 22:29:25 -07:00
mpsc.c
serial: MPSC: set baudrate when BRG divider is set.
2008-02-05 09:44:10 -08:00
mux.c
drivers/serial/: Spelling fixes
2008-02-03 17:29:25 +02:00
netx-serial.c
of_serial.c
of_serial: fix section mismatch warnings
2008-03-10 18:01:17 -07:00
pmac_zilog.c
[POWERPC] Optionally use new device number for pmac_zilog
2007-09-22 14:49:21 +10:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c
[ARM] 4662/1: Fix PXA serial driver compilation if SERIAL_PXA_CONSOLE is disabled
2007-11-26 14:39:12 +00:00
s3c2410.c
drivers/serial/s3c2410.c: remove dead config symbols
2008-02-05 09:44:09 -08:00
sa1100.c
sb1250-duart.c
BCM1480 serial build fix
2007-09-11 17:21:19 -07:00
sc26xx.c
SC26XX: New serial driver for SC2681 uarts
2008-02-06 10:41:06 -08:00
serial_core.c
fs/char_dev.c: chrdev_open marked static and removed from fs.h
2008-02-08 09:22:42 -08:00
serial_cs.c
pcmcia: replace kio_addr_t with unsigned int everywhere
2008-02-05 09:44:08 -08:00
serial_ks8695.c
serial_lh7a40x.c
serial_txx9.c
serial: fix serial_txx9 console initialization
2007-10-30 08:06:55 -07:00
sh-sci.c
serial: sh-sci: Fix fifo stall on SH7760/SH7780/SH7785 SCIF.
2008-03-11 13:58:50 +09:00
sh-sci.h
serial: sh-sci: Fix up SH-5 build.
2008-02-14 14:22:12 +09:00
sn_console.c
suncore.c
[SERIAL]: Fix section mismatches in Sun serial console drivers.
2007-12-29 01:19:49 -08:00
suncore.h
[SERIAL] sparc: Infrastructure to fix section mismatch bugs.
2007-12-12 07:36:34 -08:00
sunhv.c
[SERIAL] sparc: Infrastructure to fix section mismatch bugs.
2007-12-12 07:36:34 -08:00
sunsab.c
[SERIAL] sparc: Infrastructure to fix section mismatch bugs.
2007-12-12 07:36:34 -08:00
sunsab.h
sunsu.c
[SERIAL] sparc: Infrastructure to fix section mismatch bugs.
2007-12-12 07:36:34 -08:00
sunzilog.c
[SERIAL] sparc: Infrastructure to fix section mismatch bugs.
2007-12-12 07:36:34 -08:00
sunzilog.h
uartlite.c
Merge branch 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
2008-02-07 09:02:26 -08:00
ucc_uart.c
[POWERPC] qe-uart: add support for Freescale QUICCEngine UART
2008-01-23 19:34:12 -06:00
v850e_uart.c
vr41xx_siu.c
serial: fix vr41xx_siu serial console support
2007-07-31 15:39:41 -07:00
zs.c
zs.h