Hans de Goede
2a221c0422
iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines
...
Commit 5ec6486daa ("iio:imu: inv_mpu6050: support more interrupt types")
causes inv_mpu_core_probe() to fail if the IRQ does not have a
trigger-type setup.
This happens on machines where the mpu6050 is enumerated through ACPI and
an older Interrupt type ACPI resource is used for the interrupt, rather
then a GpioInt type type, causing the mpu6050 driver to no longer work
there. This happens on e.g. the Asus T100TA.
This commits makes the mpu6050 fallback to the old IRQF_TRIGGER_RISING
default if the irq-type is not setup, fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes: 5ec6486daa ("iio:imu: inv_mpu6050: support more interrupt types")
Reviewed-by: Martin Kelly <mkelly@xevo.com>
Reviewed-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-24 14:50:52 +01:00
..
accel
iio: mma8452: Fix ignoring MMA8452_INT_DRDY
2018-06-24 14:22:41 +01:00
adc
treewide: devm_kzalloc() -> devm_kcalloc()
2018-06-12 16:19:22 -07:00
afe
iio: afe: rescale: new driver
2018-04-28 18:03:22 +01:00
amplifiers
iio: amplifiers: ad8366: move channel init before iio_device_register()
2018-05-22 18:13:45 +01:00
buffer
iio:kfifo_buf: check for uint overflow
2018-03-30 11:16:12 +01:00
chemical
1st round of IIO new device support, features and cleanup for the 4.18 cycle
2018-05-11 09:50:04 +02:00
common
Staging/IIO patches for 4.18-rc1
2018-06-09 10:32:39 -07:00
counter
iio: Change ISA_BUS_API dependency to selection
2018-02-22 16:13:41 +01:00
dac
treewide: devm_kzalloc() -> devm_kcalloc()
2018-06-12 16:19:22 -07:00
dummy
iio:dummy: Add extra paragraphs on Kconfig
2018-03-03 15:20:16 +00:00
frequency
gyro
iio: Replace occurrences of magic number 0 by IIO_CHAN_INFO_RAW
2018-03-07 20:14:36 +00:00
health
humidity
imu
iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines
2018-06-24 14:50:52 +01:00
light
iio: tsl2x7x/tsl2772: avoid potential division by zero
2018-06-24 14:22:38 +01:00
magnetometer
iio: magnetometer: mag3110: Add ability to run in continuous mode
2018-05-12 11:01:59 +01:00
multiplexer
treewide: devm_kzalloc() -> devm_kcalloc()
2018-06-12 16:19:22 -07:00
orientation
potentiometer
iio: potentiometer: mcp4531: switch to using .probe_new
2018-04-15 18:12:51 +01:00
potentiostat
iio: potentiostat: lmp91000: add LMP91002 support
2018-05-12 11:02:44 +01:00
pressure
iio: pressure: bmp280: fix relative humidity unit
2018-06-24 14:22:35 +01:00
proximity
Second set of new device support, features and cleanup for IIO in the 4.17 cycle
2018-03-14 12:32:11 +01:00
resolver
staging: iio: ad2s1200: Move driver out of staging
2018-05-20 12:17:48 +01:00
temperature
iio temperature/mlx90632: silence a static checker warning
2018-02-24 13:32:05 +00:00
trigger
iio_core.h
iio_core_trigger.h
industrialio-buffer.c
industrialio-configfs.c
industrialio-core.c
industrialio-event.c
industrialio-sw-device.c
industrialio-sw-trigger.c
industrialio-trigger.c
industrialio-triggered-event.c
inkern.c
treewide: kzalloc() -> kcalloc()
2018-06-12 16:19:22 -07:00
Kconfig
staging: iio: ad2s1200: Move driver out of staging
2018-05-20 12:17:48 +01:00
Makefile
staging: iio: ad2s1200: Move driver out of staging
2018-05-20 12:17:48 +01:00