No description
  • C 98.2%
  • Assembly 1%
  • Makefile 0.3%
  • Shell 0.2%
  • Python 0.1%
Find a file
Repository files (latest commit first)
Filename Latest commit message Latest commit date
Greg Kroah-Hartman 2abce4ec2a Merge 5.4.149 into android11-5.4-lts
Changes in 5.4.149
	PCI: pci-bridge-emul: Fix big-endian support
	PCI: aardvark: Indicate error in 'val' when config read fails
	PCI: pci-bridge-emul: Add PCIe Root Capabilities Register
	PCI: aardvark: Fix reporting CRS value
	PCI/ACPI: Add Ampere Altra SOC MCFG quirk
	KVM: remember position in kvm->vcpus array
	console: consume APC, DM, DCS
	s390/pci_mmio: fully validate the VMA before calling follow_pte()
	ARM: Qualify enabling of swiotlb_init()
	apparmor: remove duplicate macro list_entry_is_head()
	ARM: 9077/1: PLT: Move struct plt_entries definition to header
	ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link()
	ARM: 9079/1: ftrace: Add MODULE_PLTS support
	ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE
	sctp: validate chunk size in __rcv_asconf_lookup
	sctp: add param size validation for SCTP_PARAM_SET_PRIMARY
	staging: rtl8192u: Fix bitwise vs logical operator in TranslateRxSignalStuff819xUsb()
	um: virtio_uml: fix memory leak on init failures
	dmaengine: acpi: Avoid comparison GSI with Linux vIRQ
	thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
	9p/trans_virtio: Remove sysfs file on probe failure
	prctl: allow to setup brk for et_dyn executables
	nilfs2: use refcount_dec_and_lock() to fix potential UAF
	profiling: fix shift-out-of-bounds bugs
	pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered
	phy: avoid unnecessary link-up delay in polling mode
	net: stmmac: reset Tx desc base address before restarting Tx
	Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
	thermal/core: Fix thermal_cooling_device_register() prototype
	drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
	parisc: Move pci_dev_is_behind_card_dino to where it is used
	dmaengine: sprd: Add missing MODULE_DEVICE_TABLE
	dmaengine: ioat: depends on !UML
	dmaengine: xilinx_dma: Set DMA mask for coherent APIs
	ceph: request Fw caps before updating the mtime in ceph_write_iter
	ceph: lockdep annotations for try_nonblocking_invalidate
	btrfs: fix lockdep warning while mounting sprout fs
	nilfs2: fix memory leak in nilfs_sysfs_create_device_group
	nilfs2: fix NULL pointer in nilfs_##name##_attr_release
	nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
	nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
	nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
	nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
	pwm: img: Don't modify HW state in .remove() callback
	pwm: rockchip: Don't modify HW state in .remove() callback
	pwm: stm32-lp: Don't modify HW state in .remove() callback
	blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
	rtc: rx8010: select REGMAP_I2C
	drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV
	Linux 5.4.149

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic55297fb43e33c9ff518898479a7313aafeb9375
2021-10-01 14:07:54 +02:00
android Merge branch 'android11-5.4' into 'android11-5.4-lts' 2021-09-17 08:43:49 +02:00
arch Merge 5.4.149 into android11-5.4-lts 2021-10-01 14:07:54 +02:00
block Merge 5.4.149 into android11-5.4-lts 2021-10-01 14:07:54 +02:00
certs certs: Trigger creation of RSA module signing key if it's not an RSA key 2021-09-15 09:47:29 +02:00
crypto This is the 5.4.132 stable release 2021-07-14 17:12:58 +02:00
Documentation This is the 5.4.148 stable release 2021-09-25 14:41:58 +02:00
drivers Merge 5.4.149 into android11-5.4-lts 2021-10-01 14:07:54 +02:00
fs Merge 5.4.149 into android11-5.4-lts 2021-10-01 14:07:54 +02:00
include Merge 5.4.149 into android11-5.4-lts 2021-10-01 14:07:54 +02:00
init kbuild: add CONFIG_LD_IS_LLD 2021-06-30 08:47:44 -04:00
ipc
kernel Merge 5.4.149 into android11-5.4-lts 2021-10-01 14:07:54 +02:00
lib Merge 5.4.149 into android11-5.4-lts 2021-10-01 14:07:54 +02:00
LICENSES
mm This is the 5.4.148 stable release 2021-09-25 14:41:58 +02:00
net Merge 5.4.149 into android11-5.4-lts 2021-10-01 14:07:54 +02:00
samples This is the 5.4.148 stable release 2021-09-25 14:41:58 +02:00
scripts This is the 5.4.148 stable release 2021-09-25 14:41:58 +02:00
security Merge 5.4.149 into android11-5.4-lts 2021-10-01 14:07:54 +02:00
sound This is the 5.4.148 stable release 2021-09-25 14:41:58 +02:00
tools This is the 5.4.148 stable release 2021-09-25 14:41:58 +02:00
usr
virt KVM: remember position in kvm->vcpus array 2021-09-26 14:07:05 +02:00
.clang-format
.cocciconfig
.get_maintainer.ignore
.gitattributes
.gitignore
.mailmap
build.config.aarch64
build.config.allmodconfig
build.config.allmodconfig.aarch64
build.config.allmodconfig.arm
build.config.allmodconfig.x86_64
build.config.arm
build.config.common ANDROID: clang: update to 12.0.5 2021-04-27 23:07:16 -07:00
build.config.db845c ANDROID: db845c: Use FRAGMENT_CONFIG 2021-03-08 19:14:48 +00:00
build.config.gki
build.config.gki-debug.aarch64
build.config.gki-debug.x86_64
build.config.gki.aarch64 ANDROID: GKI: Add FCNT KMI symbol list 2021-08-10 15:36:50 +00:00
build.config.gki.x86_64
build.config.gki_kasan
build.config.gki_kasan.aarch64
build.config.gki_kasan.x86_64
build.config.gki_kprobes ANDROID: Adding kprobes build configs for Cuttlefish 2021-03-04 18:00:16 +00:00
build.config.gki_kprobes.aarch64 ANDROID: Adding kprobes build configs for Cuttlefish 2021-03-04 18:00:16 +00:00
build.config.gki_kprobes.x86_64 ANDROID: Adding kprobes build configs for Cuttlefish 2021-03-04 18:00:16 +00:00
build.config.hikey960
build.config.x86_64
COPYING
CREDITS
Kbuild
Kconfig
MAINTAINERS UPSTREAM: HID: playstation: initial DualSense USB support. 2021-03-12 17:11:35 -08:00
Makefile Merge 5.4.149 into android11-5.4-lts 2021-10-01 14:07:54 +02:00
OWNERS ANDROID: Add OWNERS files referring to the respective android-mainline OWNERS 2021-04-01 13:45:14 +00:00
README
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry-picked from ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
    - then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry-picked from c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry-picked from ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry-picked from c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [ Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
    - then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)