android_kernel_motorola_sm6375/qcom/direwolf-vm-usb.dtsi

#include <dt-bindings/phy/qcom,usb3-5nm-qmp-combo.h>

&soc {
	usb0: ssusb@a600000 {
		compatible = "qcom,dwc-usb3-msm";
		reg = <0xa600000 0x100000>;
		reg-names = "core_base";

		iommus = <&apps_smmu 0x0820 0x0>;
		qcom,iommu-dma = "bypass";

		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		dma-ranges;

		interrupts-extended = <&pdc 14 IRQ_TYPE_EDGE_RISING>,
					<&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
					<&pdc 138 IRQ_TYPE_LEVEL_HIGH>,
					<&pdc 15 IRQ_TYPE_EDGE_RISING>;

		interrupt-names = "dp_hs_phy_irq", "pwr_event_irq",
				"ss_phy_irq", "dm_hs_phy_irq";
		qcom,use-pdc-interrupts;

		USB3_GDSC-supply = <&gcc_usb30_prim_gdsc>;
		clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
			<&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
			<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
			<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
			<&gcc GCC_USB30_PRIM_SLEEP_CLK>;
		clock-names = "core_clk", "iface_clk", "bus_aggr_clk",
					"utmi_clk", "sleep_clk";

		resets = <&gcc GCC_USB30_PRIM_BCR>;
		reset-names = "core_reset";

		qcom,core-clk-rate = <200000000>;
		qcom,core-clk-rate-hs = <66666667>;

		qcom,dwc-usb3-msm-tx-fifo-size = <27696>;

		status = "disabled";

		dwc3@a600000 {
			compatible = "snps,dwc3";
			reg = <0xa600000 0xd93c>;
			interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
			usb-phy = <&usb2_phy0>, <&usb_nop_phy>;
			linux,sysdev_is_parent;
			snps,disable-clk-gating;
			snps,has-lpm-erratum;
			snps,hird-threshold = /bits/ 8 <0x0>;
			snps,ssp-u3-u0-quirk;
			snps,is-utmi-l1-suspend;
			snps,dis-u1-entry-quirk;
			snps,dis-u2-entry-quirk;
			tx-fifo-resize;
			maximum-speed = "high-speed";
			dr_mode = "otg";
		};
	};

	/* Primary USB port related High Speed PHY */
	usb2_phy0: hsphy@88e5000 {
		compatible = "qcom,usb-hsphy-snps-femto";
		reg = <0x088e5000 0x120>;
		reg-names = "hsusb_phy_base";

		vdd-supply = <&L5A0>;
		vdda18-supply = <&L7A0>;
		vdda33-supply = <&L13A0>;

		qcom,vdd-voltage-level = <0 912000 912000>;

		clocks = <&dummycc RPMH_CXO_CLK>;
		clock-names = "ref_clk_src";

		resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
		reset-names = "phy_reset";
		status = "disabled";
	};

	usb_nop_phy: usb_nop_phy {
		compatible = "usb-nop-xceiv";
	};

	usb1: ssusb@a800000 {
		compatible = "qcom,dwc-usb3-msm";
		reg = <0xa800000 0x100000>;
		reg-names = "core_base";

		iommus = <&apps_smmu 0x0860 0x0>;
		qcom,iommu-dma = "bypass";

		#address-cells = <1>;
		#size-cells = <1>;
		ranges;
		dma-ranges;

		interrupts-extended = <&pdc 12 IRQ_TYPE_EDGE_RISING>,
					<&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
					<&pdc 136 IRQ_TYPE_LEVEL_HIGH>,
					<&pdc 13 IRQ_TYPE_EDGE_RISING>;

		interrupt-names = "dp_hs_phy_irq", "pwr_event_irq",
				"ss_phy_irq", "dm_hs_phy_irq";
		qcom,use-pdc-interrupts;

		USB3_GDSC-supply = <&gcc_usb30_sec_gdsc>;
		clocks = <&gcc GCC_USB30_SEC_MASTER_CLK>,
			<&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
			<&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
			<&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
			<&gcc GCC_USB30_SEC_SLEEP_CLK>;
		clock-names = "core_clk", "iface_clk", "bus_aggr_clk",
					"utmi_clk", "sleep_clk";

		resets = <&gcc GCC_USB30_SEC_BCR>;
		reset-names = "core_reset";

		qcom,core-clk-rate = <200000000>;
		qcom,core-clk-rate-hs = <66666667>;

		qcom,dwc-usb3-msm-tx-fifo-size = <27696>;

		qcom,default-mode-host;
		status = "disabled";

		dwc3@a800000 {
			compatible = "snps,dwc3";
			reg = <0xa800000 0xd93c>;
			interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
			usb-phy = <&usb2_phy1>, <&usb_nop_phy>;
			linux,sysdev_is_parent;
			snps,disable-clk-gating;
			snps,has-lpm-erratum;
			snps,hird-threshold = /bits/ 8 <0x0>;
			snps,ssp-u3-u0-quirk;
			snps,is-utmi-l1-suspend;
			snps,dis-u1-entry-quirk;
			snps,dis-u2-entry-quirk;
			tx-fifo-resize;
			maximum-speed = "high-speed";
			dr_mode = "otg";
		};
	};

	/* Secondary USB port related High Speed PHY */
	usb2_phy1: hsphy@8902000 {
		compatible = "qcom,usb-hsphy-snps-femto";
		reg = <0x08902000 0x120>;
		reg-names = "hsusb_phy_base";

		vdd-supply = <&L1C0>;
		vdda18-supply = <&L7C0>;
		vdda33-supply = <&L2C0>;

		qcom,vdd-voltage-level = <0 912000 912000>;

		clocks = <&dummycc RPMH_CXO_CLK>;
		clock-names = "ref_clk_src";

		resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
		reset-names = "phy_reset";
		status = "disabled";
	};
};