Greg Kroah-Hartman
2c68888f1d
Second set of IIO fixes for the 4.13 cycle. ...
Given the late stage of this series, some more involved fixes have been
held back for the upcoming merge window.
The hid-sensor issue has been causing problems for a long time so it
is great to have that one finally fixed! No more bug reports for the
userspace guys (well about that anyway).
* documentation
- some warning fixes due to missing colons in kernel-doc.
* adis16480
- fix accel scale factor.
* bmp280
- properly initialize the device for humidity readings - without this
the humidity readings may be skipped and a magic value of 0x8000 returned.
* hid-sensor-strigger
- fix a race with user space when powering up the sensor.
* ina291
- Avoid an underflow for the sleeping time as a result of supporting the
fastest rates.
* st-magnetometer
- Fix the status register address for hte LSM303AGR,
- Remove the ihl property for LSM303AGR as the sensor doesn't support
active low for the dataready line.
* stm32-adc
- Fix use of a common clock rate.
* stm32-timer
- fix the quadrature mode get routine to account for the magic 0 value.
set on boot.
- fix the return value of write_raw,
- fix the get/set down count direction as the enum value was not being
converted to the relevant bit field,
- add an enable attribute to actually turn it on when in encoder mode,
- missing mask when reading the trigger mode.
-----BEGIN PGP SIGNATURE-----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=1ota
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-4.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Second set of IIO fixes for the 4.13 cycle.
Given the late stage of this series, some more involved fixes have been
held back for the upcoming merge window.
The hid-sensor issue has been causing problems for a long time so it
is great to have that one finally fixed! No more bug reports for the
userspace guys (well about that anyway).
* documentation
- some warning fixes due to missing colons in kernel-doc.
* adis16480
- fix accel scale factor.
* bmp280
- properly initialize the device for humidity readings - without this
the humidity readings may be skipped and a magic value of 0x8000 returned.
* hid-sensor-strigger
- fix a race with user space when powering up the sensor.
* ina291
- Avoid an underflow for the sleeping time as a result of supporting the
fastest rates.
* st-magnetometer
- Fix the status register address for hte LSM303AGR,
- Remove the ihl property for LSM303AGR as the sensor doesn't support
active low for the dataready line.
* stm32-adc
- Fix use of a common clock rate.
* stm32-timer
- fix the quadrature mode get routine to account for the magic 0 value.
set on boot.
- fix the return value of write_raw,
- fix the get/set down count direction as the enum value was not being
converted to the relevant bit field,
- add an enable attribute to actually turn it on when in encoder mode,
- missing mask when reading the trigger mode.
2017-08-20 10:45:54 -07:00
libceph: make RECOVERY_DELETES feature create a new interval
2017-08-01 16:46:45 +02:00
libceph: fallback for when there isn't a pool-specific choose_arg
2017-08-01 16:46:44 +02:00
firmware /meson
PATCH] iio: Fix some documentation warnings
2017-08-20 15:21:46 +01:00
net/mlx4_en: Fix wrong indication of Wake-on-LAN (WoL) support
2017-08-02 10:44:09 -07:00
Third set of -rc fixes for 4.13 cycle
2017-08-08 11:42:33 -07:00
mtd: nand: Declare tBERS, tR and tPROG as u64 to avoid integer overflow
2017-08-02 10:26:42 +02:00
drivers/perf: arm_pmu: Request PMU SPIs with IRQF_PER_CPU
2017-07-27 13:43:22 +01:00
pinctrl: generic: update references to Documentation/pinctrl.txt
2017-08-07 15:26:34 +02:00
staging/iio fixes for 4.13-rc5
2017-08-13 12:30:17 -07:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
USB fixes for 4.13-rc2
2017-07-22 08:55:16 -07:00
tty: pl011: fix initialization order of QDF2400 E44
2017-07-30 07:53:44 -07:00
bpf: fix mixed signed/unsigned derived min/max value bounds
2017-07-20 15:20:27 -07:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
scsi: bnx2i: Simplify cpu hotplug code
2017-07-26 21:51:25 -04:00
cpuset: fix a deadlock due to incomplete patching of cpusets_enabled()
2017-08-02 17:16:12 -07:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
dm, dax: Make sure dm_dax_flush() is called if device supports it
2017-07-26 15:55:44 -04:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
pinctrl: generic: update references to Documentation/pinctrl.txt
2017-08-07 15:26:34 +02:00
dma-coherent: introduce interface for default DMA pool
2017-07-20 16:09:10 +02:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
trace: fix the errors caused by incompatible type of RCU variables
2017-07-20 09:27:29 -04:00
i2c: rephrase explanation of I2C_CLASS_DEPRECATED
2017-07-31 17:33:53 +02:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
udp6: fix jumbogram reception
2017-07-31 22:01:21 -07:00
genirq/cpuhotplug: Revert "Set force affinity flag on hotplug migration"
2017-07-27 15:40:02 +02:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
kthread: fix documentation build warning
2017-08-02 16:34:47 -07:00
KVM: avoid using rcu_dereference_protected
2017-08-02 22:41:02 +02:00
llist: clang: introduce member_address_is_nonnull()
2017-07-19 15:33:50 -07:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem
2017-08-10 15:54:07 -07:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
NFS: Store the raw NFS access mask in the inode's access cache
2017-07-21 11:51:19 -04:00
NFSv4: Fix EXCHANGE_ID corrupt verifier issue
2017-08-01 16:28:55 -04:00
nvmet_fc: add defer_req callback for deferment of cmd buffer return
2017-08-10 11:06:38 +02:00
nvme-fc: revise TRADDR parsing
2017-07-25 18:05:25 +02:00
nvme: fabrics commands should use the fctype field for data direction
2017-07-25 17:58:32 +02:00
mm: allow page_cache_get_speculative in interrupt context
2017-08-02 17:16:13 -07:00
PCI: Add pci_reset_function_locked()
2017-08-01 20:11:02 -05:00
net: phy: Remove trailing semicolon in macro definition
2017-07-25 12:33:43 -07:00
ptp: introduce ptp auxiliary worker
2017-08-01 15:22:55 -07:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
dma-buf/sync_file: Allow multiple sync_files to wrap a single dma-fence
2017-07-31 10:55:24 -03:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
trace: fix the errors caused by incompatible type of RCU variables
2017-07-20 09:27:29 -04:00
Now that IPC and other changes have landed, enable manual markings for
2017-07-19 08:55:18 -07:00
uuid: remove uuid_be
2017-07-24 17:50:37 +02:00
include/linux/vfio.h: Guard powerpc-specific functions with CONFIG_VFIO_SPAPR_EEH
2017-07-26 13:30:23 -06:00
sched/wait: Clean up some documentation warnings
2017-07-25 11:17:02 +02:00
workqueue: implicit ordered attribute should be overridable
2017-07-25 13:28:56 -04:00
