Repository files (latest commit first)

Filename	Latest commit message	Latest commit date
Linus Torvalds 0bbddb8cbe Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata ... Pull libata updates from Tejun Heo: - libata has always been limiting the maximum queue depth to 31, with one entry set aside mostly for historical reasons. This didn't use to make much difference but Jens found out that modern hard drives can actually perform measurably better with the extra one queue depth. Jens updated libata core so that it can make use of full 32 queue depth - Damien updated command retry logic in error handling so that it doesn't unnecessarily retry when upper layer (SCSI) is gonna handle them - A couple misc changes * 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_fsl: use the right type for tag bitshift ahci: enable full queue depth of 32 libata: don't clamp queue depth to ATA_MAX_QUEUE - 1 libata: add extra internal command sata_nv: set host can_queue count appropriately libata: remove assumption that ATA_MAX_QUEUE - 1 is the max libata: use ata_tag_internal() consistently libata: bump ->qc_active to a 64-bit type libata: convert core and drivers to ->hw_tag usage libata: introduce notion of separate hardware tags libata: Fix command retry decision libata: Honor RQF_QUIET flag libata: Make ata_dev_set_mode() less verbose libata: Fix ata_err_string() libata: Fix comment typo in ata_eh_analyze_tf() sata_nv: don't use block layer bounce buffer ata: hpt37x: Convert to use match_string() helper		2018-06-05 17:01:41 -07:00
..
acard-ahci.c	libata: convert core and drivers to ->hw_tag usage	2018-05-11 13:10:43 -07:00
ahci.c	ahci: Add PCI ID for Cannon Lake PCH-LP AHCI	2018-05-24 07:03:32 -07:00
ahci.h	Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2018-06-05 17:01:41 -07:00
ahci_brcm.c	ata: ahci_brcm: Recover from failures to identify devices	2018-01-17 07:52:29 -08:00
ahci_ceva.c	ata: ceva: Add SMMU support for SATA IP	2017-10-23 07:09:27 -07:00
ahci_da850.c	sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'	2017-08-16 07:38:27 -07:00
ahci_dm816.c	ata: ahci: add support for DaVinci DM816 SATA controller	2017-03-24 11:40:03 -04:00
ahci_imx.c	ahci: imx: add the imx8qm ahci sata support	2018-03-29 06:43:55 -07:00
ahci_mtk.c	ahci: mtk: Change driver name to ahci-mtk	2017-12-04 12:35:29 -08:00
ahci_mvebu.c	ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI	2018-04-26 11:25:15 -07:00
ahci_octeon.c	Delete redundant return value check of platform_get_resource()	2017-03-06 15:40:59 -05:00
ahci_platform.c	ata: ahci_platform: Add shutdown handler	2017-08-04 13:34:14 -07:00
ahci_qoriq.c	libahci: Allow drivers to override stop_engine	2018-04-26 11:25:04 -07:00
ahci_seattle.c
ahci_st.c
ahci_sunxi.c
ahci_tegra.c	ata: ahci_tegra: Add AHCI support for Tegra210	2018-03-14 08:24:21 -07:00
ahci_xgene.c	libahci: Allow drivers to override stop_engine	2018-04-26 11:25:04 -07:00
ata_generic.c
ata_piix.c	ata_piix: constify pci_bits	2018-01-08 06:15:41 -08:00
Kconfig	Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2018-04-03 17:42:25 -07:00
libahci.c	Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2018-06-05 17:01:41 -07:00
libahci_platform.c	Revert "ata: ahci-platform: add reset control support"	2018-04-09 15:10:50 -07:00
libata-acpi.c
libata-core.c	Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2018-06-05 17:01:41 -07:00
libata-eh.c	Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2018-06-05 17:01:41 -07:00
libata-pmp.c
libata-scsi.c	libata: don't clamp queue depth to ATA_MAX_QUEUE - 1	2018-05-11 13:10:44 -07:00
libata-sff.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
libata-trace.c
libata-transport.c	libata: add refcounting to ata_host	2018-03-13 13:29:10 -07:00
libata-transport.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
libata-zpodd.c	libata: zpodd: small read overflow in eject_tray()	2018-05-29 06:48:54 -07:00
libata.h	libata: add refcounting to ata_host	2018-03-13 13:29:10 -07:00
Makefile	Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2018-04-03 17:42:25 -07:00
pata_acpi.c
pata_ali.c	ata: Deprecate pci_get_bus_and_slot()	2018-01-11 17:23:23 -06:00
pata_amd.c	cs5536: add support for IDE controller variant	2017-08-11 10:35:07 -07:00
pata_arasan_cf.c	pata_arasan_cf: Delete an unnecessary variable initialisation in arasan_cf_probe()	2018-02-18 05:16:35 -08:00
pata_artop.c	ata: pata_artop: remove redundant initialization of pio	2017-09-18 20:24:21 -07:00
pata_atiixp.c	libata:pata_atiixp: Don't use unconnected secondary port on SB600	2018-01-08 04:02:02 -08:00
pata_atp867x.c	ata: mark expected switch fall-throughs	2017-10-23 07:06:09 -07:00
pata_bk3710.c	pata_bk3710: clarify license version and use SPDX header	2018-03-01 13:59:03 -08:00
pata_cmd64x.c
pata_cmd640.c
pata_cs5520.c
pata_cs5530.c
pata_cs5535.c
pata_cs5536.c	cs5536: add support for IDE controller variant	2017-08-11 10:35:07 -07:00
pata_cypress.c
pata_efar.c
pata_ep93xx.c	ata: ep93xx: cut drvdata assignment	2017-05-30 11:54:36 -04:00
pata_falcon.c	pata_falcon: clarify license version and use SPDX header	2018-03-01 13:58:17 -08:00
pata_ftide010.c	ata: ftide010: fix resource printing	2017-06-21 18:06:18 -04:00
pata_gayle.c	ata: add Amiga Gayle PATA controller driver	2018-03-19 07:41:36 -07:00
pata_hpt3x2n.c
pata_hpt3x3.c
pata_hpt37x.c	ata: hpt37x: Convert to use match_string() helper	2018-05-07 08:50:30 -07:00
pata_hpt366.c
pata_icside.c
pata_imx.c	pata: imx: support controller modes up to PIO4	2016-11-09 11:48:58 -05:00
pata_isapnp.c
pata_it821x.c	pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()	2018-02-18 05:26:07 -08:00
pata_it8213.c
pata_ixp4xx_cf.c	ata: pass queued command to ->sff_data_xfer method	2017-01-10 11:11:17 -05:00
pata_jmicron.c
pata_legacy.c	ata: pass queued command to ->sff_data_xfer method	2017-01-10 11:11:17 -05:00
pata_macio.c	pata_macio: Delete an error message for a failed memory allocation in two functions	2018-02-18 05:24:16 -08:00
pata_marvell.c
pata_mpc52xx.c	pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()	2018-02-18 05:23:25 -08:00
pata_mpiix.c
pata_netcell.c
pata_ninja32.c	pata_ninja32: Avoid corrupting status flags	2016-08-30 11:59:47 -04:00
pata_ns87410.c
pata_ns87415.c
pata_octeon_cf.c	pata_octeon_cf: use of_property_read_{bool|u32}()	2017-08-28 10:44:24 -07:00
pata_of_platform.c	ata: constify of_device_id structures	2017-03-06 15:18:01 -05:00
pata_oldpiix.c
pata_opti.c
pata_optidma.c
pata_palmld.c
pata_pcmcia.c	ata: pass queued command to ->sff_data_xfer method	2017-01-10 11:11:17 -05:00
pata_pdc202xx_old.c
pata_pdc2027x.c	ata: pata_pdc2027x: Replace mdelay with msleep	2018-01-25 07:28:31 -08:00
pata_piccolo.c
pata_platform.c
pata_pxa.c
pata_radisys.c
pata_rb532_cf.c	ata: rb532_cf: cut drvdata assignment	2017-05-30 11:54:37 -04:00
pata_rdc.c	ata: declare ata_port_info structures as const	2017-06-12 14:06:34 -04:00
pata_rz1000.c
pata_samsung_cf.c	pata_samsung_cf: Delete an error message for a failed memory allocation in pata_s3c_probe()	2018-02-18 05:20:38 -08:00
pata_sc1200.c
pata_sch.c	ata: declare ata_port_info structures as const	2017-06-12 14:06:34 -04:00
pata_serverworks.c
pata_sil680.c
pata_sis.c
pata_sl82c105.c
pata_triflex.c
pata_via.c
pdc_adma.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_dwc_460ex.c	libata: convert core and drivers to ->hw_tag usage	2018-05-11 13:10:43 -07:00
sata_fsl.c	sata_fsl: use the right type for tag bitshift	2018-05-14 08:14:21 -07:00
sata_gemini.c	ata: sata_gemini: Introduce explicit IDE pin control	2017-08-11 10:32:09 -07:00
sata_gemini.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00
sata_highbank.c	libahci: Allow drivers to override stop_engine	2018-04-26 11:25:04 -07:00
sata_inic162x.c	ata: declare ata_port_info structures as const	2017-06-12 14:06:34 -04:00
sata_mv.c	libata: bump ->qc_active to a 64-bit type	2018-05-11 13:10:43 -07:00
sata_nv.c	sata_nv: set host can_queue count appropriately	2018-05-11 13:10:43 -07:00
sata_promise.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_promise.h	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_qstor.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_rcar.c	ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()	2018-02-13 06:39:38 -08:00
sata_sil.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_sil24.c	Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2018-06-05 17:01:41 -07:00
sata_sis.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_svw.c	ata: Convert to using %pOF instead of full_name	2017-07-18 18:02:36 -04:00
sata_sx4.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_uli.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sata_via.c	sata_via: Enable optional hotplug on VT6420	2017-06-26 16:54:53 -04:00
sata_vsc.c	ata: update references for libata documentation	2017-05-16 11:25:59 -04:00
sis.h	License cleanup: add SPDX GPL-2.0 license identifier to files with no license	2017-11-02 11:10:55 +01:00