android_kernel_motorola_sm6375/qcom/sdxlemur-rcm-rc.dtsi

#include "sdxlemur-pmic-overlay.dtsi"
#include "pm7250b.dtsi"
#include <dt-bindings/iio/qti_power_supply_iio.h>
#include <dt-bindings/spmi/spmi.h>
#include "sdxlemur-cnss.dtsi"

&pm7250b_clkdiv {
	clocks = <&rpmhcc RPMH_CXO_CLK>;
	clock-names = "xo";
};

&soc {
	rcm_batterydata: qcom,battery-data {
		qcom,batt-id-range-pct = <15>;
		#include "qg-batterydata-alium-3600mah.dtsi"
	};
};

&spmi_debug_bus {
	qcom,pm7250b-debug@2 {
		compatible = "qcom,spmi-pmic";
		reg = <2 SPMI_USID>;
		#address-cells = <2>;
		#size-cells = <0>;
		qcom,can-sleep;
	};
};

&pcie0 {
	qcom,boot-option = <0x1>;
	qcom,l1-2-th-scale = <2>; /* 1us */
	qcom,l1-2-th-value = <70>;
};

&qnand_1 {
	status = "ok"
};

&sdhc_1 {
	status = "ok"

	vdd-supply = <&vreg_sd_vdd>;
	qcom,vdd-voltage-level = <2950000 2950000>;
	qcom,vdd-current-level = <0 800000>;

	vdd-io-supply = <&vreg_vddpx_2>;
	qcom,vdd-io-voltage-level = <1800000 2850000>;
	qcom,vdd-io-current-level = <0 10000>;

	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&sdc2_on>;
	pinctrl-1 = <&sdc2_off>;

	cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
};

&pm7250b_vadc {
	charger_skin_therm {
		reg = <ADC5_AMUX_THM1_100K_PU>;
		label = "charger_skin_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};

	conn_therm {
		reg = <ADC5_AMUX_THM3_100K_PU>;
		label = "conn_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
	};
};

&pm7250b_charger {
	#io-channel-cells = <1>;
	io-channels = <&pm7250b_vadc ADC5_USB_IN_V_16>,
		      <&pm7250b_vadc ADC5_USB_IN_I>,
		      <&pm7250b_vadc ADC5_CHG_TEMP>,
		      <&pm7250b_vadc ADC5_DIE_TEMP>,
		      <&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>,
		      <&pm7250b_vadc ADC5_SBUx>,
		      <&pm7250b_vadc ADC5_VPH_PWR>,
		      <&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>,
		      <&pm7250b_qg PSY_IIO_RESISTANCE_ID>,
		      <&pm7250b_qg PSY_IIO_VOLTAGE_NOW>,
		      <&pm7250b_qg PSY_IIO_TEMP>,
		      <&pm7250b_qg PSY_IIO_CAPACITY>,
		      <&pm7250b_qg PSY_IIO_VOLTAGE_OCV>,
		      <&pm7250b_qg PSY_IIO_VOLTAGE_AVG>,
		      <&pm7250b_qg PSY_IIO_DEBUG_BATTERY>,
		      <&pm7250b_qg PSY_IIO_REAL_CAPACITY>,
		      <&pm7250b_qg PSY_IIO_CC_SOC>,
		      <&pm7250b_qg PSY_IIO_CURRENT_NOW>,
		      <&pm7250b_qg PSY_IIO_VOLTAGE_MAX>,
		      <&pm7250b_qg PSY_IIO_CHARGE_FULL>,
		      <&pm7250b_qg PSY_IIO_CHARGE_COUNTER>,
		      <&pm7250b_qg PSY_IIO_CYCLE_COUNT>,
		      <&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>,
		      <&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>;
	io-channel-names = "usb_in_voltage",
			   "usb_in_current",
			   "chg_temp",
			   "die_temp",
			   "conn_temp",
			   "sbux_res",
			   "vph_voltage",
			   "skin_temp",
			   "resistance_id",
			   "voltage_now",
			   "temp",
			   "capacity",
			   "voltage_ocv",
			   "voltage_avg",
			   "debug_battery",
			   "real_capacity",
			   "cc_soc",
			   "current_now",
			   "voltage_max",
			   "charge_full",
			   "charge_counter",
			   "cycle_count",
			   "charge_full_design",
			   "time_to_full_now";
	qcom,battery-data = <&rcm_batterydata>;
	qcom,auto-recharge-soc = <98>;
	qcom,step-charging-enable;
	qcom,sw-jeita-enable;
	qcom,charger-temp-max = <800>;
	qcom,smb-temp-max = <800>;
	qcom,suspend-input-on-debug-batt;
	qcom,fcc-stepping-enable;
	qcom,fcc-step-delay-ms = <100>;
	qcom,fcc-step-size-ua = <100000>;
	qcom,thermal-mitigation = <3600000 3000000 1500000 1000000 500000>;
	qcom,smb-internal-pull-kohm = <0>;
	qcom,en-skin-therm-mitigation;
	qcom,hvdcp3-standalone-config;
	dpdm-supply = <&usb2_phy>;

	smb5_vbus: qcom,smb5-vbus {
		regulator-name = "smb5-vbus";
	};

	smb5_vconn: qcom,smb5-vconn {
		regulator-name = "smb5-vconn";
	};
};

&pm7250b_qg {
	#io-channel-cells = <1>;
	io-channels = <&pm7250b_vadc ADC5_BAT_THERM_100K_PU>,
		      <&pm7250b_vadc ADC5_BAT_ID_100K_PU>,
		      <&pm7250b_charger PSY_IIO_INPUT_CURRENT_LIMITED>,
		      <&pm7250b_charger PSY_IIO_RECHARGE_SOC>,
		      <&pm7250b_charger PSY_IIO_FORCE_RECHARGE>,
		      <&pm7250b_charger PSY_IIO_CHARGE_DONE>;
	io-channel-names = "batt-therm",
			   "batt-id",
			   "input_current_limited",
			   "recharge_soc",
			   "force_recharge",
			   "charge_done";
	qcom,battery-data = <&rcm_batterydata>;
	qcom,qg-iterm-ma = <150>;
	qcom,hold-soc-while-full;
	qcom,linearize-soc;
	qcom,cl-feedback-on;
	qcom,tcss-enable;
	qcom,fvss-enable;
	qcom,fvss-vbatt-mv = <3300>;
	qcom,bass-enable;
};

&pm7250b_pdphy {
	vdd-pdphy-supply = <&L10B>;
	vbus-supply = <&smb5_vbus>;
	vconn-supply = <&smb5_vconn>;

	#io-channel-cells = <1>;
	io-channels = <&pm7250b_charger PSY_IIO_PD_ACTIVE>,
		      <&pm7250b_charger PSY_IIO_TYPEC_CC_ORIENTATION>,
		      <&pm7250b_charger PSY_IIO_CONNECTOR_TYPE>,
		      <&pm7250b_charger PSY_IIO_TYPEC_POWER_ROLE>,
		      <&pm7250b_charger PSY_IIO_PD_USB_SUSPEND_SUPPORTED>,
		      <&pm7250b_charger PSY_IIO_TYPEC_SRC_RP>,
		      <&pm7250b_charger PSY_IIO_PD_IN_HARD_RESET>,
		      <&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>,
		      <&pm7250b_charger PSY_IIO_PR_SWAP>,
		      <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MIN>,
		      <&pm7250b_charger PSY_IIO_PD_VOLTAGE_MAX>,
		      <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>,
		      <&pm7250b_charger PSY_IIO_TYPEC_MODE>,
		      <&pm7250b_charger PSY_IIO_PE_START>;
	io-channel-names = "pd_active",
			   "typec_cc_orientation",
			   "connector_type",
			   "typec_power_role",
			   "pd_usb_suspend_supported",
			   "typec_src_rp",
			   "pd_in_hard_reset",
			   "pr_current_max",
			   "pr_swap",
			   "pd_voltage_min",
			   "pd_voltage_max",
			   "real_type",
			   "typec_mode",
			   "pe_start";
};