Russell King
0425a14213
[MMC] mmci: allow small data transfers
...
If a data transfer is small (less than a FIFO size) we would
hang waiting for the data to be read due to the PIO interrupt
not occuring. We allowed for this in our PIO interrupt handler,
but not when setting up a data transfer.
Apply the "fix" when setting up a data transfer as well.
Signed-off-by: Russell King <[email protected] >
2006-02-16 16:48:31 +00:00
..
au1xmmc.c
[MMC] Add MMC command type flags
2006-02-02 12:23:12 +00:00
au1xmmc.h
Au1[12]00 mmc driver. Only tested on the Au1200 at this point though
2005-10-29 19:32:26 +01:00
Kconfig
[MMC] Remove extra character in AU1XXX MMC Kconfig entry
2006-02-08 22:23:05 +00:00
Makefile
Au1[12]00 mmc driver. Only tested on the Au1200 at this point though
2005-10-29 19:32:26 +01:00
mmc.c
[MMC] Add MMC command type flags
2006-02-02 12:23:12 +00:00
mmc.h
[MMC] Add MMC class devices
2005-08-19 09:41:24 +01:00
mmc_block.c
[MMC] Add MMC command type flags
2006-02-02 12:23:12 +00:00
mmc_queue.c
mmc_queue.h
mmc_sysfs.c
[PATCH] Add mmc_bus_type probe and remove methods
2006-01-13 11:26:08 -08:00
mmci.c
[MMC] mmci: allow small data transfers
2006-02-16 16:48:31 +00:00
mmci.h
[MMC] mmci: kunmap_atomic() unmaps virtual address, not page
2006-01-05 10:31:23 +00:00
pxamci.c
[MMC] Add MMC command type flags
2006-02-02 12:23:12 +00:00
pxamci.h
wbsd.c
[MMC] Add MMC command type flags
2006-02-02 12:23:12 +00:00
wbsd.h
[MMC] Remove unused timer.
2005-09-12 20:35:54 +01:00