Suman Tripathi
2a0bdff6b9
ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.
...
This patch fixes the dma state machine lockup due to the processing
of IDENTIFY DEVICE PIO mode command. The X-Gene AHCI controller
has an errata in which it cannot clear the BSY bit after the PIO setup
FIS. The dma state machine enters CMFatalErrorUpdate state and locks
up. This patch also removes the dma restart workaround from the read_id
function as the read_id function is only called by libata layer for
ATA_INTERNAL commands. But for some cases eg: PORT MULTIPLIER
and udev, the framework will enumerate using SCSI commands and it will
not call read_id function.
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-08 11:46:05 -04:00
..
acard-ahci.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
ahci.c
Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
2014-06-09 14:58:36 -07:00
ahci.h
libahci: export ahci_qc_issue() and ahci_start_fix_rx()
2014-07-08 11:46:05 -04:00
ahci_da850.c
libahci_platform: add host_flags parameter in ahci_platform_init_host()
2014-05-14 13:07:10 -04:00
ahci_imx.c
ata: ahci_imx: warn when disabling ahci link
2014-06-24 17:58:14 -04:00
ahci_mvebu.c
libahci_platform: add host_flags parameter in ahci_platform_init_host()
2014-05-14 13:07:10 -04:00
ahci_platform.c
ahci: disable ncq feature for hisilicon sata
2014-06-24 16:54:23 -04:00
ahci_st.c
libahci_platform: add host_flags parameter in ahci_platform_init_host()
2014-05-14 13:07:10 -04:00
ahci_sunxi.c
libahci_platform: add host_flags parameter in ahci_platform_init_host()
2014-05-14 13:07:10 -04:00
ahci_xgene.c
ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.
2014-07-08 11:46:05 -04:00
ata_generic.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
ata_piix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
Kconfig
Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
2014-06-09 14:58:36 -07:00
libahci.c
libahci: export ahci_qc_issue() and ahci_start_fix_rx()
2014-07-08 11:46:05 -04:00
libahci_platform.c
libahci_platform: Fail when PHY required but PHY support disabled
2014-06-17 12:10:59 -04:00
libata-acpi.c
ACPI and power management updates for 3.15-rc1
2014-04-01 12:48:54 -07:00
libata-core.c
libata: Blacklist queued trim for Crucial M500
2014-06-02 16:59:25 -07:00
libata-eh.c
libata, libsas: kill pm_result and related cleanup
2014-03-18 16:08:38 -04:00
libata-pmp.c
ata: enable quirk from jmicron JMB350 for JMB394
2014-01-31 07:05:44 -05:00
libata-scsi.c
ata: SATL compliance for Inquiry Product Revision
2014-05-02 10:57:47 -04:00
libata-sff.c
libata-sff: remove dead code
2014-05-04 15:01:42 -04:00
libata-transport.c
libata-transport.h
libata-zpodd.c
libata: zpodd: eliminate odd_can_poweroff
2014-03-14 11:23:47 -04:00
libata.h
Makefile
ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
2014-05-04 15:28:59 -04:00
pata_acpi.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ali.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_amd.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_arasan_cf.c
pata_arasan_cf: fix ata_host_activate() failure handling
2014-04-14 13:50:03 -04:00
pata_artop.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_at32.c
pata_at91.c
pata_at91: fix ata_host_activate() failure handling
2014-04-02 13:17:31 -04:00
pata_atiixp.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_atp867x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_bf54x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cmd64x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cmd640.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5520.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5530.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5535.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5536.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cypress.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_efar.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ep93xx.c
ata: ep93xx: use dmaengine_prep_slave_sg api instead of internal callback
2014-05-27 09:33:22 -04:00
pata_hpt3x2n.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_hpt3x3.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_hpt37x.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_hpt366.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_icside.c
pata_imx.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_isapnp.c
pata_it821x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_it8213.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c
pata_jmicron.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_legacy.c
pata_legacy: Remove dead code
2014-03-11 08:30:53 -04:00
pata_macio.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_marvell.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_mpc52xx.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_mpiix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_netcell.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ninja32.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ns87410.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ns87415.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_octeon_cf.c
pata_octeon_cf: use devm_kzalloc() to allocate cf_port
2014-04-14 13:33:28 -04:00
pata_of_platform.c
pata_oldpiix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_opti.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_optidma.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_palmld.c
pata_pcmcia.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_pdc202xx_old.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_pdc2027x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_piccolo.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_platform.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_pxa.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_radisys.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_rb532_cf.c
pata_rdc.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_rz1000.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_samsung_cf.c
Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
2014-06-09 14:58:36 -07:00
pata_sc1200.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_scc.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sch.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_serverworks.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sil680.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sis.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sl82c105.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_triflex.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_via.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pdc_adma.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_dwc_460ex.c
ata: remove superfluous casts
2014-03-26 12:36:53 -04:00
sata_fsl.c
sata_fsl: remove check for CONFIG_MPC8315_DS
2014-05-21 15:36:22 -04:00
sata_highbank.c
ata: sata_highbank: remove superfluous cast
2014-03-26 11:42:01 -04:00
sata_inic162x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_mv.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_nv.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_promise.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_promise.h
sata_qstor.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_rcar.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_sil.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_sil24.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_sis.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_svw.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_sx4.c
ata: remove superfluous casts
2014-03-26 12:36:53 -04:00
sata_uli.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_via.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_vsc.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sis.h