android_kernel_motorola_sm6375/qcom/sa8155-pmic-overlay.dtsi

#include "pm8150.dtsi"

pm8150_1_tz: &pm8150_tz {
};

pm8150_1_clkdiv: &pm8150_clkdiv {
	clock-output-names = "pm8150_1_div_clk1", "pm8150_1_div_clk2";
};

pm8150_1_rtc: &pm8150_rtc {
	disable-alarm-wakeup;
};

pm8150_1_gpios: &pm8150_gpios {
};

/* PM8150_2: */
&spmi_bus {
	#address-cells = <2>;
	#size-cells = <0>;
	interrupt-controller;
	#interrupt-cells = <4>;

	qcom,pm8150@4 {
		compatible = "qcom,spmi-pmic";
		reg = <4 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <0>;

		pm8150_2_tz: qcom,temp-alarm@2400 {
			compatible = "qcom,spmi-temp-alarm";
			reg = <0x2400>;
			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
			io-channels = <&pm8150_2_vadc ADC5_DIE_TEMP>;
			io-channel-names = "thermal";
			#thermal-sensor-cells = <0>;
		};

		qcom,power-on@800 {
			compatible = "qcom,qpnp-power-on";
			reg = <0x800>;
		};

		pm8150_2_clkdiv: clock-controller@5b00 {
			compatible = "qcom,spmi-clkdiv";
			reg = <0x5b00>;
			#clock-cells = <1>;
			qcom,num-clkdivs = <2>;
			clock-output-names = "pm8150_2_div_clk1",
						"pm8150_2_div_clk2";
			clocks = <&rpmhcc RPMH_CXO_CLK>;
			clock-names = "xo";
		};

		pm8150_2_gpios: pinctrl@c000 {
			compatible = "qcom,pm8150-gpio";
			reg = <0xc000>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		pm8150_2_vadc: vadc@3100 {
			compatible = "qcom,spmi-adc5";
			reg = <0x3100>;
			#address-cells = <1>;
			#size-cells = <0>;
			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "eoc-int-en-set";
			#io-channel-cells = <1>;
			io-channel-ranges;

			/* Channel node */
			ref_gnd {
				reg = <ADC5_REF_GND>;
				label = "ref_gnd";
				qcom,pre-scaling = <1 1>;
			};

			vref_1p25 {
				reg = <ADC5_1P25VREF>;
				label = "vref_1p25";
				qcom,pre-scaling = <1 1>;
			};

			die_temp {
				reg = <ADC5_DIE_TEMP>;
				label = "die_temp";
				qcom,pre-scaling = <1 1>;
			};
		};
	};

	qcom,pm8150@5 {
		compatible ="qcom,spmi-pmic";
		reg = <5 SPMI_USID>;
		#address-cells = <1>;
		#size-cells = <1>;
	};
};

/* PMIC GPIO pin control configurations: */
&pm8150_1_gpios {
	key_home {
		key_home_default: key_home_default {
			pins = "gpio1";
			function = "normal";
			input-enable;
			bias-pull-up;
			power-source = <0>;
		};
	};

	storage_sd_detect {
		storage_cd_default: storage_cd_default {
			pins = "gpio4";
			function = "normal";
			input-enable;
			bias-pull-up;
			power-source = <0>;
		};
	};

	key_vol_up {
		key_vol_up_default: key_vol_up_default {
			pins = "gpio6";
			function = "normal";
			input-enable;
			bias-pull-up;
			power-source = <1>;
		};
	};
};

#include <dt-bindings/thermal/thermal_qti.h>

&thermal_zones {
	pm8150_2_temp_alarm: pm8150_2_tz {
		polling-delay-passive = <100>;
		polling-delay = <0>;
		thermal-governor = "step_wise";
		thermal-sensors = <&pm8150_2_tz>;

		trips {
			pm8150_2_trip0: trip0 {
				temperature = <105000>;
				hysteresis = <0>;
				type = "passive";
			};

			pm8150_2_trip1: trip1 {
				temperature = <125000>;
				hysteresis = <0>;
				type = "critical";
			};

			trip2 {
				temperature = <155000>;
				hysteresis = <0>;
				type = "critical";
			};
		};

		cooling-maps {
			trip0_cpu0 {
				trip = <&pm8150_2_trip0>;
				cooling-device =
					<&CPU0 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};

			trip0_cpu1 {
				trip = <&pm8150_2_trip0>;
				cooling-device = <&cpu1_isolate 1 1>;
			};

			trip0_cpu2 {
				trip = <&pm8150_2_trip0>;
				cooling-device = <&cpu2_isolate 1 1>;
			};

			trip0_cpu3 {
				trip = <&pm8150_2_trip0>;
				cooling-device = <&cpu3_isolate 1 1>;
			};

			trip0_cpu4 {
				trip = <&pm8150_2_trip0>;
				cooling-device = <&cpu4_isolate 1 1>;
			};

			trip0_cpu5 {
				trip = <&pm8150_2_trip0>;
				cooling-device = <&cpu5_isolate 1 1>;
			};

			trip0_cpu6 {
				trip = <&pm8150_2_trip0>;
				cooling-device = <&cpu6_isolate 1 1>;
			};

			trip0_cpu7 {
				trip = <&pm8150_2_trip0>;
				cooling-device = <&cpu7_isolate 1 1>;
			};
		};
	};

	pm8150_tz {
		cooling-maps {
			trip0_cpu0 {
				trip = <&pm8150_trip0>;
				cooling-device =
					<&CPU0 THERMAL_MAX_LIMIT
						THERMAL_MAX_LIMIT>;
			};

			trip0_cpu1 {
				trip = <&pm8150_trip0>;
				cooling-device = <&cpu1_isolate 1 1>;
			};

			trip0_cpu2 {
				trip = <&pm8150_trip0>;
				cooling-device = <&cpu2_isolate 1 1>;
			};

			trip0_cpu3 {
				trip = <&pm8150_trip0>;
				cooling-device = <&cpu3_isolate 1 1>;
			};

			trip0_cpu4 {
				trip = <&pm8150_trip0>;
				cooling-device = <&cpu4_isolate 1 1>;
			};

			trip0_cpu5 {
				trip = <&pm8150_trip0>;
				cooling-device = <&cpu5_isolate 1 1>;
			};

			trip0_cpu6 {
				trip = <&pm8150_trip0>;
				cooling-device = <&cpu6_isolate 1 1>;
			};

			trip0_cpu7 {
				trip = <&pm8150_trip0>;
				cooling-device = <&cpu7_isolate 1 1>;
			};
		};
	};
};