mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-29 03:01:39 -04:00
5015d9fc82
1.update params about ibiza sar sensor 2.holi-moto-common-overlay.dtsi Change-Id: Ie877188c9480461fe4fe29257b8f48667cb6e212 Signed-off-by: weimh1 <[email protected]> Reviewed-on: https://gerrit.mot.com/1866709 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Huosheng Liao <[email protected]> Submit-Approved: Jira Key
597 lines
16 KiB
Devicetree
597 lines
16 KiB
Devicetree
/* Copyright (c) 2020, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include "carrier-channel-ids.dtsi"
|
|
|
|
#include "holi-pmic-overlay.dtsi"
|
|
#include "display/holi-sde-display-mtp.dtsi"
|
|
#include "holi-thermal-overlay.dtsi"
|
|
#include <dt-bindings/iio/qti_power_supply_iio.h>
|
|
#include <dt-bindings/moto/moto-mem-reserve.h>
|
|
|
|
&utags {
|
|
compatible = "mmi,utags";
|
|
mmi,main-utags = "/dev/block/bootdevice/by-name/utags";
|
|
mmi,backup-utags = "/dev/block/bootdevice/by-name/utagsBackup";
|
|
};
|
|
|
|
&hw {
|
|
compatible = "mmi,utags";
|
|
mmi,dir-name = "hw";
|
|
mmi,main-utags = "/dev/block/bootdevice/by-name/hw";
|
|
};
|
|
|
|
&reserved_memory {
|
|
ramoops_mem {
|
|
compatible = "ramoops";
|
|
no-map;
|
|
reg = <0x0 RAMOOPS_BASE_ADDR 0x0 RAMOOPS_SIZE>;
|
|
console-size = <RAMOOPS_CONSOLE_SIZE>;
|
|
pmsg-size = <RAMOOPS_PMSG_SIZE>;
|
|
record-size = <RAMOOPS_RECORD_SIZE>;
|
|
no-dump-oops;
|
|
};
|
|
|
|
wdog_cpuctx_mem: wdog_cpuctx_region {
|
|
no-map;
|
|
reg = <0x0 WDOG_CPUCTX_BASE
|
|
0x0 WDOG_CPUCTX_SIZE>;
|
|
};
|
|
|
|
tzlog_dump_mem: tzlog_dump_mem_region {
|
|
no-map;
|
|
reg = <0x0 TZLOG_BCK_BASE
|
|
0x0 TZLOG_BCK_SIZE>;
|
|
};
|
|
|
|
mmi_annotate_mem: mmi_annotate_mem_region {
|
|
no-map;
|
|
reg = <0x0 MMI_ANNOTATE_BASE
|
|
0x0 MMI_ANNOTATE_SIZE>;
|
|
};
|
|
};
|
|
|
|
&sdhc_1 {
|
|
status = "ok"
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc1_on>;
|
|
pinctrl-1 = <&sdc1_off>;
|
|
|
|
vdd-supply = <&L7E>;
|
|
qcom,vdd-voltage-level = <2960000 2960000>;
|
|
qcom,vdd-current-level = <0 570000>;
|
|
|
|
vdd-io-supply = <&L12A>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-lpm-sup;
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
|
qcom,vdd-io-current-level = <0 325000>;
|
|
};
|
|
|
|
&sdhc_2 {
|
|
status = "ok"
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_on>;
|
|
pinctrl-1 = <&sdc2_off>;
|
|
|
|
vdd-supply = <&L9E>;
|
|
qcom,vdd-voltage-level = <2960000 2960000>;
|
|
qcom,vdd-current-level = <0 800000>;
|
|
|
|
vdd-io-supply = <&L6E>;
|
|
qcom,vdd-io-voltage-level = <1800000 2960000>;
|
|
qcom,vdd-io-current-level = <0 22000>;
|
|
|
|
cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&ufsphy_mem {
|
|
compatible = "qcom,ufs-phy-qmp-v3";
|
|
|
|
vdda-phy-supply = <&L18A>;
|
|
vdda-pll-supply = <&L22A>;
|
|
vdda-phy-max-microamp = <62900>;
|
|
vdda-pll-max-microamp = <18300>;
|
|
|
|
status = "ok"
|
|
};
|
|
|
|
&ufshc_mem {
|
|
vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
|
|
vdd-hba-fixed-regulator;
|
|
|
|
vcc-supply = <&L7E>;
|
|
vcc-voltage-level = <2950000 2960000>;
|
|
vcc-max-microamp = <800000>;
|
|
|
|
vccq2-supply = <&L12A>;
|
|
vccq2-max-microamp = <800000>;
|
|
vccq2-voltage-level = <1800000 1800000>;
|
|
|
|
qcom,vddp-ref-clk-supply = <&L22A>;
|
|
qcom,vddp-ref-clk-max-microamp = <100>;
|
|
|
|
status = "ok"
|
|
};
|
|
|
|
&soc {
|
|
mmi_annotate {
|
|
compatible = "mmi,annotate";
|
|
memory-region = <&mmi_annotate_mem>;
|
|
mem-size = <0x20000>;
|
|
};
|
|
|
|
mmi_relay{
|
|
compatible = "mmi,sys-relay";
|
|
};
|
|
|
|
gpio_keys: gpio_keys {
|
|
compatible = "gpio-keys";
|
|
label = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&key_vol_up_default>;
|
|
|
|
vol_up {
|
|
label = "volume_up";
|
|
gpios = <&pm6350_gpios 2 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
|
|
mot_batterydata: qcom,battery-data {
|
|
df-serialnum = "SB18D00294";
|
|
qcom,batt-id-range-pct = <15>;
|
|
#include "qg-batterydata-md50-amperex-5000mah.dtsi"
|
|
};
|
|
};
|
|
|
|
&pm6150a_amoled {
|
|
status = "ok"
|
|
};
|
|
|
|
&pm6150a_l8 {
|
|
regulator-always-on;
|
|
qcom,init-voltage = <1800000>;
|
|
};
|
|
|
|
&tlmm {
|
|
sar_int_default: sar_int_default {
|
|
mux {
|
|
pins = "gpio24";
|
|
function = "gpio";
|
|
};
|
|
config {
|
|
pins = "gpio24";
|
|
num-grp-pins = <1>;
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sar_int_sleep: sar_int_sleep {
|
|
mux {
|
|
pins = "gpio24";
|
|
function = "gpio";
|
|
};
|
|
config {
|
|
pins = "gpio24";
|
|
num-grp-pins = <1>;
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qupv3_se8_i2c {
|
|
status = "okay";
|
|
qcom,i2c-touch-active="synaptics,tcm-i2c";
|
|
|
|
synaptics_tcm@20 {
|
|
compatible = "synaptics,tcm-i2c";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <22 0x2008>;
|
|
pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
|
|
"pmx_ts_release";
|
|
pinctrl-0 = <&ts_active>;
|
|
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
|
pinctrl-2 = <&pmx_ts_release>;
|
|
vdd-supply = <&L11A>;
|
|
avdd-supply = <&L6A>;
|
|
synaptics,pwr-reg-name = "avdd";
|
|
synaptics,bus-reg-name = "vdd";
|
|
synaptics,irq-gpio = <&tlmm 22 0x2008>;
|
|
synaptics,irq-on-state = <0>;
|
|
synaptics,reset-gpio = <&tlmm 21 0x00>;
|
|
synaptics,reset-on-state = <0>;
|
|
synaptics,reset-active-ms = <20>;
|
|
synaptics,reset-delay-ms = <200>;
|
|
synaptics,power-delay-ms = <200>;
|
|
synaptics,ubl-i2c-addr = <0x20>;
|
|
synaptics,extend_report;
|
|
synaptics,firmware-name = "synaptics_firmware.img";
|
|
|
|
panel = <&dsi_rm69299_visionox_amoled_video
|
|
&dsi_rm69299_visionox_amoled_cmd>;
|
|
};
|
|
|
|
sx937x:sx937x@2c {
|
|
compatible = "Semtech,sx937x";
|
|
reg = <0x2c>;
|
|
pinctrl-names = "default","sleep";
|
|
pinctrl-0 = <&sar_int_default>;
|
|
pinctrl-1 = <&sar_int_sleep>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <24 0x02>;
|
|
interrupt-names = "sx937x_irq";
|
|
Semtech,nirq-gpio = <&tlmm 24 0x02>;
|
|
cap_vdd-supply = <&pm6150a_l8>;
|
|
/*use PH4/5/6 as the reference sensor
|
|
set it to 0xff if the ref-phases-x is not used*/
|
|
Semtech,ref-phases-a = <4>;
|
|
Semtech,ref-phases-b = <5>;
|
|
Semtech,ref-phases-c = <6>;
|
|
Semtech,button-flag = <0x0f>;
|
|
Semtech,reg-num = <61>;
|
|
Semtech,reg-init = <
|
|
0x8024 0x7F00 /*PHEN, Disable all Phases*/
|
|
0x4004 0x74 /*irq mask*/
|
|
0x8020 0x10 /*Set scan period*/
|
|
|
|
/*set Phase sampling frequency to 65KHz*/
|
|
0x8028 0x876 /*AFE_PARAM_PH0*/
|
|
0x8034 0x876 /*AFE_PARAM_PH1*/
|
|
0x8040 0x876 /*AFE_PARAM_PH2*/
|
|
0x804C 0x876 /*AFE_PARAM_PH3*/
|
|
0x8058 0x876 /*AFE_PARAM_PH4*/
|
|
0x8064 0x876 /*AFE_PARAM_PH5*/
|
|
0x8070 0x876 /*AFE_PARAM_PH6*/
|
|
/*0x807C 0x876 */ /*AFE_PARAM_PH7*/
|
|
|
|
/*set CS3 to hiz, because it used as IRQ pin*/
|
|
0x8030 0xFFD9FF /*REG_AFEPH_PH0, CS4, ANT1, Bottom*/
|
|
0x803C 0xBFF9FF /*REG_AFEPH_PH1, CS7, ANT2, Top Right*/
|
|
0x8048 0xFFF9FD /*REG_AFEPH_PH2, CS0, ANT3, Top Left*/
|
|
0x8054 0xFEF9FF /*REG_AFEPH_PH3, CS5, ANT4, Top Right side*/
|
|
0x8060 0xF7F9FF /*REG_AFEPH_PH4, CS6, ANT1_REF, Bottom*/
|
|
0x806C 0xFFF97F /*REG_AFEPH_PH5, CS2, ANT2_REF, Top Right*/
|
|
0x8078 0xFFF9EF /*REG_AFEPH_PH6, CS1, ANT3_REF, Top Left*/
|
|
0x8084 0xBFF9FF /*REG_AFEPH_PH7, NOT USE*/
|
|
|
|
/*Set Phase Proximity Threshold*/
|
|
0x8098 0x00009240 /*prox threshold ph0*/
|
|
0x80B8 0x00008035 /*prox threshold ph1*/
|
|
0x80D8 0x00004343 /*prox threshold ph2*/
|
|
0x80F8 0x00003C3C /*prox threshold ph3*/
|
|
0x8118 0x00000000 /*prox threshold ph4*/
|
|
0x8138 0x00000000 /*prox threshold ph5*/
|
|
0x8158 0x00000000 /*prox threshold ph6*/
|
|
/*0x8178 0x00000000*/ /*prox threshold ph7*/
|
|
|
|
/*Set Useful Filter*/
|
|
0x808C 0x20600019 /*PH0 Filter Setup B, non-detect threshold of USE filter*/
|
|
0x80AC 0x20600019 /*PH1 Filter Setup B, non-detect threshold of USE filter*/
|
|
0x80CC 0x20600019 /*PH2 Filter Setup B, non-detect threshold of USE filter*/
|
|
0x80EC 0x20600019 /*PH3 Filter Setup B, non-detect threshold of USE filter*/
|
|
0x810C 0x20600019 /*PH4 Filter Setup B, non-detect threshold of USE filter*/
|
|
0x812C 0x20600019 /*PH5 Filter Setup B, non-detect threshold of USE filter*/
|
|
0x814C 0x20600019 /*PH6 Filter Setup B, non-detect threshold of USE filter*/
|
|
0x816C 0x20600019 /*PH7 Filter Setup B, non-detect threshold of USE filter*/
|
|
|
|
0x8090 0x50D47000
|
|
0x80B0 0x46D87000
|
|
0x80D0 0x46D07000
|
|
0x80F0 0x3CDE7000
|
|
0x8110 0x50D27000
|
|
0x8130 0x50D27000
|
|
0x8150 0x50D27000
|
|
0x8170 0x50D27000
|
|
|
|
/*PH0123 raw filter 1/4*/
|
|
0x8088 0x300000
|
|
0x80A8 0x300000
|
|
0x80C8 0x300000
|
|
0x80E8 0x300000
|
|
|
|
/*PH456 raw filter 1/64*/
|
|
0x8108 0x600000
|
|
0x8128 0x600000
|
|
0x8148 0x600000
|
|
|
|
/*Set Reference Phase*/
|
|
0x8188 0x8000014 /*Reference Correction Setup B ENG1*/
|
|
0x818C 0x0 /*Reference Correction Setup B ENG2*/
|
|
0x8190 0x0 /*Reference Correction Setup B ENG3*/
|
|
0x8194 0x0 /*Reference Correction Setup B ENG4*/
|
|
|
|
/*Set Reference Correction*/
|
|
0x80A0 0x222200E1 /*Reference Correction Setup A PH0*/
|
|
0x80C0 0x0 /*Reference Correction Setup A PH1*/
|
|
0x80E0 0x0 /*Reference Correction Setup A PH2*/
|
|
0x8100 0x0 /*Reference Correction Setup A PH3*/
|
|
0x8120 0x0 /*Reference Correction Setup A PH4*/
|
|
0x8140 0x0 /*Reference Correction Setup A PH5*/
|
|
0x8160 0x0 /*Reference Correction Setup A PH6*/
|
|
0x8180 0x0 /*Reference Correction Setup A PH7*/
|
|
|
|
0x8024 0x7F7F /*PHEN, Enable PH0~PH6*/
|
|
>;
|
|
|
|
status = "ok"
|
|
};
|
|
};
|
|
|
|
&pm7250b_charger {
|
|
status = "ok"
|
|
#io-channel-cells = <1>;
|
|
io-channels = <&pm7250b_vadc ADC5_USB_IN_V_16>,
|
|
<&pm7250b_vadc ADC5_USB_IN_I>,
|
|
<&pm7250b_vadc ADC5_CHG_TEMP>,
|
|
<&pm7250b_vadc ADC5_DIE_TEMP>,
|
|
<&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>,
|
|
<&pm7250b_vadc ADC5_SBUx>,
|
|
<&pm7250b_vadc ADC5_VPH_PWR>,
|
|
<&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>,
|
|
<&pm7250b_qg PSY_IIO_RESISTANCE_ID>,
|
|
<&pm7250b_qg PSY_IIO_VOLTAGE_NOW>,
|
|
<&pm7250b_qg PSY_IIO_TEMP>,
|
|
<&pm7250b_qg PSY_IIO_CAPACITY>,
|
|
<&pm7250b_qg PSY_IIO_VOLTAGE_OCV>,
|
|
<&pm7250b_qg PSY_IIO_VOLTAGE_AVG>,
|
|
<&pm7250b_qg PSY_IIO_DEBUG_BATTERY>,
|
|
<&pm7250b_qg PSY_IIO_REAL_CAPACITY>,
|
|
<&pm7250b_qg PSY_IIO_CC_SOC>,
|
|
<&pm7250b_qg PSY_IIO_CURRENT_NOW>,
|
|
<&pm7250b_qg PSY_IIO_VOLTAGE_MAX>,
|
|
<&pm7250b_qg PSY_IIO_CHARGE_FULL>,
|
|
<&pm7250b_qg PSY_IIO_CHARGE_COUNTER>,
|
|
<&pm7250b_qg PSY_IIO_CYCLE_COUNT>,
|
|
<&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>,
|
|
<&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>;
|
|
io-channel-names = "usb_in_voltage",
|
|
"usb_in_current",
|
|
"chg_temp",
|
|
"die_temp",
|
|
"conn_temp",
|
|
"sbux_res",
|
|
"vph_voltage",
|
|
"skin_temp",
|
|
"resistance_id",
|
|
"voltage_now",
|
|
"temp",
|
|
"capacity",
|
|
"voltage_ocv",
|
|
"voltage_avg",
|
|
"debug_battery",
|
|
"real_capacity",
|
|
"cc_soc",
|
|
"current_now",
|
|
"voltage_max",
|
|
"charge_full",
|
|
"charge_counter",
|
|
"cycle_count",
|
|
"charge_full_design",
|
|
"time_to_full_now";
|
|
qcom,battery-data = <&mot_batterydata>;
|
|
qcom,sec-charger-config = <0>;
|
|
qcom,auto-recharge-soc = <98>;
|
|
qcom,charger-temp-max = <800>;
|
|
qcom,smb-temp-max = <800>;
|
|
qcom,suspend-input-on-debug-batt;
|
|
qcom,hvdcp3-standalone-config;
|
|
qcom,fcc-max-ua = <4000000>;
|
|
qcom,fv-max-uv = <4450000>;
|
|
qcom,usb-icl-ua = <3000000>;
|
|
qcom,thermal-mitigation = <4000000 3500000
|
|
3000000 2500000
|
|
2000000 1500000
|
|
1200000 900000
|
|
600000 300000>;
|
|
qcom,pd-voltage-max-uv = <9000000>;
|
|
qcom,usbpd-phandle = <&pm7250b_pdphy>;
|
|
};
|
|
|
|
&spmi_bus {
|
|
qcom,pm7250b@2 {
|
|
pm7250b_mmi: qcom,qpnp-smb5-mmi {
|
|
status = "ok"
|
|
compatible = "qcom,mmi-pm7250b-smb5";
|
|
#io-channel-cells = <1>;
|
|
io-channels = <&pm7250b_charger PSY_IIO_CTM_CURRENT_MAX>,
|
|
<&pm7250b_charger PSY_IIO_CURRENT_MAX>,
|
|
<&pm7250b_charger PSY_IIO_TYPEC_MODE>,
|
|
<&pm7250b_charger PSY_IIO_DP_DM>,
|
|
<&pm7250b_charger PSY_IIO_PD_ACTIVE>,
|
|
<&pm7250b_charger PSY_IIO_USB_REAL_TYPE>,
|
|
<&pm7250b_charger PSY_IIO_HW_CURRENT_MAX>,
|
|
<&pm7250b_charger PSY_IIO_USB_INPUT_CURRENT_SETTLED>,
|
|
<&pm7250b_charger PSY_IIO_RERUN_AICL>,
|
|
<&pm7250b_charger PSY_IIO_SW_JEITA_ENABLED>,
|
|
<&pm7250b_qg PSY_IIO_VOLTAGE_NOW>,
|
|
<&pm7250b_qg PSY_IIO_CURRENT_NOW>,
|
|
<&pm7250b_qg PSY_IIO_TEMP>,
|
|
<&pm7250b_qg PSY_IIO_CAPACITY>,
|
|
<&pm7250b_qg PSY_IIO_CHARGE_FULL>,
|
|
<&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>;
|
|
io-channel-names = "usb_ctm_current_max",
|
|
"main_current_max",
|
|
"usb_typec_mode",
|
|
"battery_dp_dm",
|
|
"usb_pd_active",
|
|
"usb_real_type",
|
|
"usb_hw_current_max",
|
|
"usb_input_current_settled",
|
|
"battery_rerun_aicl",
|
|
"battery_sw_jeita_enabled",
|
|
"voltage_now",
|
|
"current_now",
|
|
"temp",
|
|
"capacity",
|
|
"charge_full",
|
|
"charge_full_design";
|
|
qcom,enable-charging-limit;
|
|
qcom,upper-limit-capacity = <65>;
|
|
qcom,lower-limit-capacity = <60>;
|
|
qcom,mmi-temp-zones = <0 4200 970 0>,
|
|
<10 4200 2500 970>,
|
|
<15 0 2500 2500>,
|
|
<45 0 4000 4000>,
|
|
<60 4200 2500 0>;
|
|
qcom,iterm-ma = <242>;
|
|
qcom,vfloat-comp-uv = <20000>;
|
|
qcom,force-hvdcp-5v;
|
|
};
|
|
};
|
|
|
|
qcom,pm6350@0 {
|
|
qpnp-power-on-mmi@800 {
|
|
compatible = "qcom,qpnp-power-on-mmi";
|
|
interrupts = <0x0 0x8 0x3 IRQ_TYPE_EDGE_BOTH>;
|
|
interrupt-names = "kpdpwr-bark";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pm7250b_qg {
|
|
status = "ok"
|
|
#io-channel-cells = <1>;
|
|
io-channels = <&pm7250b_vadc ADC5_BAT_THERM_100K_PU>,
|
|
<&pm7250b_vadc ADC5_BAT_ID_100K_PU>,
|
|
<&pm7250b_charger PSY_IIO_INPUT_CURRENT_LIMITED>,
|
|
<&pm7250b_charger PSY_IIO_RECHARGE_SOC>,
|
|
<&pm7250b_charger PSY_IIO_FORCE_RECHARGE>,
|
|
<&pm7250b_charger PSY_IIO_CHARGE_DONE>;
|
|
io-channel-names = "batt-therm",
|
|
"batt-id",
|
|
"input_current_limited",
|
|
"recharge_soc",
|
|
"force_recharge",
|
|
"charge_done";
|
|
qcom,battery-data = <&mot_batterydata>;
|
|
qcom,qg-iterm-ma = <150>;
|
|
qcom,hold-soc-while-full;
|
|
qcom,linearize-soc;
|
|
qcom,cl-feedback-on;
|
|
qcom,cl-min-start-soc = <0>;
|
|
qcom,cl-max-start-soc = <5>;
|
|
qcom,cl-min-temp = <150>;
|
|
qcom,cl-max-temp = <450>;
|
|
qcom,cl-max-increment = <5>;
|
|
qcom,cl-max-decrement = <10>;
|
|
qcom,cl-min-limit = <200>;
|
|
qcom,cl-max-limit = <30>;
|
|
qcom,tcss-enable;
|
|
qcom,fvss-enable;
|
|
qcom,fvss-vbatt-mv = <3300>;
|
|
qcom,bass-enable;
|
|
qcom,use-cp-iin-sns;
|
|
qcom,s3-entry-ibat-ua = <35000>;
|
|
qcom,s3-exit-ibat-ua = <50000>;
|
|
};
|
|
|
|
&pm7250b_charger {
|
|
dpdm-supply = <&qusb_phy0>;
|
|
|
|
smb5_vbus: qcom,smb5-vbus {
|
|
regulator-name = "smb5-vbus";
|
|
};
|
|
|
|
smb5_vconn: qcom,smb5-vconn {
|
|
regulator-name = "smb5-vconn";
|
|
};
|
|
};
|
|
|
|
&pm7250b_pdphy {
|
|
vdd-pdphy-supply = <&L3A>;
|
|
vbus-supply = <&smb5_vbus>;
|
|
vconn-supply = <&smb5_vconn>;
|
|
qcom,default-sink-caps = <5000 3000>, /*5V @ 3A*/
|
|
<9000 2000>; /*9V @ 2A*/
|
|
|
|
#io-channel-cells = <1>;
|
|
io-channels = <&pm7250b_charger PSY_IIO_PD_ACTIVE>,
|
|
<&pm7250b_charger PSY_IIO_TYPEC_CC_ORIENTATION>,
|
|
<&pm7250b_charger PSY_IIO_CONNECTOR_TYPE>,
|
|
<&pm7250b_charger PSY_IIO_TYPEC_POWER_ROLE>,
|
|
<&pm7250b_charger PSY_IIO_PD_USB_SUSPEND_SUPPORTED>,
|
|
<&pm7250b_charger PSY_IIO_TYPEC_SRC_RP>,
|
|
<&pm7250b_charger PSY_IIO_PD_IN_HARD_RESET>,
|
|
<&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>,
|
|
<&pm7250b_charger PSY_IIO_PR_SWAP>,
|
|
<&pm7250b_charger PSY_IIO_PD_VOLTAGE_MIN>,
|
|
<&pm7250b_charger PSY_IIO_PD_VOLTAGE_MAX>,
|
|
<&pm7250b_charger PSY_IIO_USB_REAL_TYPE>,
|
|
<&pm7250b_charger PSY_IIO_TYPEC_MODE>,
|
|
<&pm7250b_charger PSY_IIO_PE_START>;
|
|
io-channel-names = "pd_active",
|
|
"typec_cc_orientation",
|
|
"connector_type",
|
|
"typec_power_role",
|
|
"pd_usb_suspend_supported",
|
|
"typec_src_rp",
|
|
"pd_in_hard_reset",
|
|
"pr_current_max",
|
|
"pr_swap",
|
|
"pd_voltage_min",
|
|
"pd_voltage_max",
|
|
"real_type",
|
|
"typec_mode",
|
|
"pe_start";
|
|
};
|
|
|
|
&pm6150l_rgb_led {
|
|
red {
|
|
label = "charging";
|
|
};
|
|
|
|
green {
|
|
status = "disabled";
|
|
};
|
|
|
|
blue {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&bcl_soc {
|
|
io-channels = <&pm7250b_charger PSY_IIO_HW_CURRENT_MAX>;
|
|
io-channel-names = "usb_hw_current_max";
|
|
qcom,bcl-not-mitigate-icl = <2500>;
|
|
};
|
|
|
|
&usb0 {
|
|
extcon = <&pm7250b_pdphy>, <&eud>;
|
|
#io-channel-cells = <1>;
|
|
io-channels= <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>;
|
|
io-channel-names = "chg_type";
|
|
};
|
|
|
|
&ufshc_mem {
|
|
spm-level = <3>;
|
|
};
|
|
|
|
&mdss_dsi_phy0 {
|
|
qcom,platform-strength-ctrl = [55 03 00 00
|
|
55 03 00 00
|
|
55 03 00 00
|
|
55 03 00 00
|
|
55 00 00 00];
|
|
};
|