mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-28 10:41:38 -04:00
e2202e0a90
Add AW2016 RGB LED device nodes to expose the class LED devices for userspace to control them. Change-Id: I97f7e4ba13d44ddbf7634149e89f8087f0ddee98
532 lines
12 KiB
Devicetree
532 lines
12 KiB
Devicetree
#include "holi-audio-overlay.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include "holi-pmic-overlay-pm6125.dtsi"
|
|
#include "holi-thermal-overlay-pm6125.dtsi"
|
|
#include "display/holi-sde-display-qrd-pm6125.dtsi"
|
|
#include "camera/holi-camera-pm6125-overlay.dtsi"
|
|
|
|
&wcd938x_codec {
|
|
cdc-vdd-rxtx-supply = <&L9A>;
|
|
cdc-vddio-supply = <&L9A>;
|
|
qcom,cdc-static-supplies = "cdc-vdd-rxtx",
|
|
"cdc-vddio";
|
|
/*
|
|
* Overriding cdc-vdd-mic-bias-supply to dummy value
|
|
* to avoid compilation errors as BOB is not definied
|
|
* for pm6125
|
|
*/
|
|
cdc-vdd-mic-bias-supply = <>;
|
|
};
|
|
|
|
&wcd937x_codec {
|
|
status = "ok"
|
|
cdc-vdd-rxtx-supply = <&L9A>;
|
|
cdc-vddpx-supply = <&L9A>;
|
|
qcom,cdc-static-supplies = "cdc-vdd-rxtx",
|
|
"cdc-vddpx";
|
|
/*
|
|
* Overriding cdc-vdd-mic-bias-supply to dummy value
|
|
* to avoid compilation errors as BOB is not definied
|
|
* for pm6125
|
|
*/
|
|
cdc-vdd-mic-bias-supply = <>;
|
|
};
|
|
|
|
&sdhc_1 {
|
|
status = "ok"
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc1_on>;
|
|
pinctrl-1 = <&sdc1_off>;
|
|
|
|
vdd-supply = <&L24A>;
|
|
qcom,vdd-voltage-level = <2960000 2960000>;
|
|
qcom,vdd-current-level = <0 570000>;
|
|
|
|
vdd-io-supply = <&L11A>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-lpm-sup;
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
|
qcom,vdd-io-current-level = <0 325000>;
|
|
};
|
|
|
|
&sdhc_2 {
|
|
status = "ok"
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_on>;
|
|
pinctrl-1 = <&sdc2_off>;
|
|
|
|
vdd-supply = <&L22A>;
|
|
qcom,vdd-voltage-level = <2960000 2960000>;
|
|
qcom,vdd-current-level = <0 800000>;
|
|
|
|
vdd-io-supply = <&L5A>;
|
|
qcom,vdd-io-voltage-level = <1800000 2960000>;
|
|
qcom,vdd-io-current-level = <0 22000>;
|
|
|
|
cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&ufsphy_mem {
|
|
compatible = "qcom,ufs-phy-qmp-v3";
|
|
|
|
vdda-phy-supply = <&L7A>;
|
|
vdda-pll-supply = <&L4A>;
|
|
vdda-phy-max-microamp = <62900>;
|
|
vdda-pll-max-microamp = <18300>;
|
|
|
|
status = "ok"
|
|
};
|
|
|
|
&ufshc_mem {
|
|
vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
|
|
vdd-hba-fixed-regulator;
|
|
|
|
vcc-supply = <&L24A>;
|
|
vcc-voltage-level = <2950000 2960000>;
|
|
vcc-max-microamp = <800000>;
|
|
|
|
vccq2-supply = <&L11A>;
|
|
vccq2-max-microamp = <800000>;
|
|
vccq2-voltage-level = <1800000 1800000>;
|
|
|
|
qcom,vddp-ref-clk-supply = <&L4A>;
|
|
qcom,vddp-ref-clk-max-microamp = <100>;
|
|
|
|
status = "ok"
|
|
};
|
|
|
|
&qupv3_se0_i2c {
|
|
status = "ok"
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
nq@28 {
|
|
compatible = "qcom,sn-nci";
|
|
reg = <0x28>;
|
|
qcom,sn-irq = <&tlmm 9 0x00>;
|
|
qcom,sn-ven = <&tlmm 6 0x00>;
|
|
qcom,sn-firm = <&tlmm 8 0x00>;
|
|
qcom,sn-clkreq = <&tlmm 7 0x00>;
|
|
qcom,sn-vdd-1p8-supply = <&L9A>;
|
|
qcom,sn-vdd-1p8-voltage = <1800000 1800000>;
|
|
qcom,sn-vdd-1p8-current = <157000>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <9 0>;
|
|
interrupt-names = "nfc_irq";
|
|
pinctrl-names = "nfc_active", "nfc_suspend";
|
|
pinctrl-0 = <&nfc_int_active &nfc_enable_active>;
|
|
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend>;
|
|
};
|
|
};
|
|
|
|
&wsa881x_analog_reset_gpio {
|
|
compatible = "qcom,msm-cdc-pinctrl";
|
|
pinctrl-names = "aud_active", "aud_sleep";
|
|
pinctrl-0 = <&spkr_1_sd_n_active>;
|
|
pinctrl-1 = <&spkr_1_sd_n_sleep>;
|
|
};
|
|
|
|
&wsa881x_i2c_e {
|
|
status = "ok"
|
|
cdc-vdd-1p8-supply = <&L9A>;
|
|
compatible = "qcom,wsa881x-i2c-codec";
|
|
reg = <0x0e>;
|
|
clock-names = "wsa_mclk";
|
|
clocks = <&wsa881x_analog_clk 0>;
|
|
qcom,wsa-analog-clk-gpio = <&wsa881x_analog_clk_gpio>;
|
|
qcom,wsa-analog-reset-gpio = <&wsa881x_analog_reset_gpio>;
|
|
};
|
|
|
|
&holi_snd {
|
|
qcom,model = "holi-qrd-snd-card";
|
|
qcom,sku-model = "holi-qrdsku1-snd-card";
|
|
qcom,msm-mi2s-master = <1>, <1>, <1>, <1>;
|
|
qcom,wcn-btfm = <1>;
|
|
qcom,audio-routing =
|
|
"AMIC1", "Analog Mic1",
|
|
"Analog Mic1", "MIC BIAS1",
|
|
"AMIC2", "Analog Mic2",
|
|
"Analog Mic2", "MIC BIAS2",
|
|
"AMIC3", "Analog Mic3",
|
|
"Analog Mic3", "MIC BIAS3",
|
|
"AMIC4", "Analog Mic4",
|
|
"Analog Mic4", "MIC BIAS3",
|
|
"TX DMIC0", "Digital Mic0",
|
|
"TX DMIC0", "MIC BIAS1",
|
|
"TX DMIC1", "Digital Mic1",
|
|
"TX DMIC1", "MIC BIAS1",
|
|
"TX DMIC2", "Digital Mic2",
|
|
"TX DMIC2", "MIC BIAS3",
|
|
"TX DMIC3", "Digital Mic3",
|
|
"TX DMIC3", "MIC BIAS3",
|
|
"IN1_HPHL", "HPHL_OUT",
|
|
"IN2_HPHR", "HPHR_OUT",
|
|
"IN3_AUX", "AUX_OUT",
|
|
"RX_TX DEC0_INP", "TX DEC0 MUX",
|
|
"RX_TX DEC1_INP", "TX DEC1 MUX",
|
|
"RX_TX DEC2_INP", "TX DEC2 MUX",
|
|
"RX_TX DEC3_INP", "TX DEC3 MUX",
|
|
"SpkrMono WSA_IN", "AUX",
|
|
"TX SWR_INPUT", "WCD_TX_OUTPUT",
|
|
"VA SWR_INPUT", "VA_SWR_CLK",
|
|
"VA SWR_INPUT", "WCD_TX_OUTPUT",
|
|
"VA_AIF1 CAP", "VA_SWR_CLK",
|
|
"VA_AIF2 CAP", "VA_SWR_CLK",
|
|
"VA_AIF3 CAP", "VA_SWR_CLK",
|
|
"VA DMIC0", "Digital Mic0",
|
|
"VA DMIC1", "Digital Mic1",
|
|
"VA DMIC2", "Digital Mic2",
|
|
"VA DMIC3", "Digital Mic3",
|
|
"VA DMIC4", "Digital Mic4",
|
|
"VA DMIC5", "Digital Mic5",
|
|
"VA DMIC0", "VA MIC BIAS1",
|
|
"VA DMIC1", "VA MIC BIAS1",
|
|
"VA DMIC2", "VA MIC BIAS3",
|
|
"VA DMIC3", "VA MIC BIAS3";
|
|
qcom,msm-mbhc-hphl-swh = <1>;
|
|
qcom,msm-mbhc-gnd-swh = <1>;
|
|
qcom,cdc-dmic01-gpios = <&cdc_dmic01_gpios>;
|
|
qcom,cdc-dmic23-gpios = <&cdc_dmic23_gpios>;
|
|
asoc-codec = <&stub_codec>, <&bolero>,
|
|
<&wcd937x_codec>, <&wsa881x_i2c_e>;
|
|
asoc-codec-names = "msm-stub-codec.1", "bolero_codec",
|
|
"wcd937x_codec", "wsa-codec0";
|
|
qcom,msm_audio_ssr_devs = <&audio_apr>, <&q6core>, <&lpi_tlmm>,
|
|
<&bolero>;
|
|
};
|
|
|
|
&soc {
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
label = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&key_vol_up_default>;
|
|
|
|
vol_up {
|
|
label = "volume_up";
|
|
gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "camera/holi-camera-sensor-pm6125-mtp.dtsi"
|
|
|
|
&qupv3_se10_i2c {
|
|
awinic@64 {
|
|
compatible = "awinic,aw2016_led";
|
|
reg = <0x64>;
|
|
|
|
awinic,red {
|
|
awinic,name = "red";
|
|
awinic,id = <0>;
|
|
awinic,imax = <2>;
|
|
awinic,led-current = <3>;
|
|
awinic,max-brightness = <255>;
|
|
awinic,rise-time-ms = <6>;
|
|
awinic,hold-time-ms = <0>;
|
|
awinic,fall-time-ms = <6>;
|
|
awinic,off-time-ms = <4>;
|
|
};
|
|
|
|
awinic,green {
|
|
awinic,name = "green";
|
|
awinic,id = <1>;
|
|
awinic,imax = <2>;
|
|
awinic,led-current = <3>;
|
|
awinic,max-brightness = <255>;
|
|
awinic,rise-time-ms = <6>;
|
|
awinic,hold-time-ms = <0>;
|
|
awinic,fall-time-ms = <6>;
|
|
awinic,off-time-ms = <4>;
|
|
};
|
|
|
|
awinic,blue {
|
|
awinic,name = "blue";
|
|
awinic,id = <2>;
|
|
awinic,imax = <2>;
|
|
awinic,led-current = <3>;
|
|
awinic,max-brightness = <255>;
|
|
awinic,rise-time-ms = <6>;
|
|
awinic,hold-time-ms = <0>;
|
|
awinic,fall-time-ms = <6>;
|
|
awinic,off-time-ms = <4>;
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
&thermal_zones {
|
|
quiet-therm-step {
|
|
polling-delay-passive = <2000>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "step_wise";
|
|
thermal-sensors = <&pm6125_adc_tm ADC5_AMUX_THM2_100K_PU>;
|
|
trips {
|
|
battery_trip0: battery-trip0 {
|
|
temperature = <42000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
modem_skin_trip0: modem-skin-trip0 {
|
|
temperature = <42000>;
|
|
hysteresis = <4000>;
|
|
type = "passive";
|
|
};
|
|
|
|
gold_trip: gold-trip {
|
|
temperature = <43000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
battery_trip1: battery-trip1 {
|
|
temperature = <44000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
modem_skin_trip1: modem-skin-trip1 {
|
|
temperature = <44000>;
|
|
hysteresis = <4000>;
|
|
type = "passive";
|
|
};
|
|
|
|
silver_trip: silver-trip {
|
|
temperature = <45000>;
|
|
hysteresis = <0>;
|
|
type = "passive";
|
|
};
|
|
|
|
battery_trip2: battery-trip2 {
|
|
temperature = <46000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
battery_trip3: battery-trip3 {
|
|
temperature = <47000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
|
|
battery_trip4: battery-trip4 {
|
|
temperature = <48000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cx_trip: cx-trip {
|
|
temperature = <55000>;
|
|
hysteresis = <5000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
cdsp-cdev {
|
|
trip = <&cx_trip>;
|
|
cooling-device = <&cdsp_sw 4 4>;
|
|
};
|
|
|
|
gpu-cdev0 {
|
|
trip = <&modem_skin_trip1>;
|
|
/* throttle to 650000000Hz */
|
|
cooling-device = <&msm_gpu (THERMAL_MAX_LIMIT-4)
|
|
(THERMAL_MAX_LIMIT-4)>;
|
|
};
|
|
|
|
gpu-cdev1 {
|
|
trip = <&cx_trip>;
|
|
/* throttle to 565000000Hz */
|
|
cooling-device = <&msm_gpu (THERMAL_MAX_LIMIT-3)
|
|
(THERMAL_MAX_LIMIT-3)>;
|
|
};
|
|
|
|
silver-cdev {
|
|
trip = <&silver_trip>;
|
|
/* throttle to 1478400KHz */
|
|
cooling-device = <&CPU0 (THERMAL_MAX_LIMIT-6)
|
|
(THERMAL_MAX_LIMIT-6)>;
|
|
};
|
|
|
|
gold-cdev {
|
|
trip = <&gold_trip>;
|
|
/* throttle to 1536000KHz */
|
|
cooling-device = <&CPU6 (THERMAL_MAX_LIMIT-5)
|
|
(THERMAL_MAX_LIMIT-5)>;
|
|
};
|
|
|
|
modem-skin-cdev0 {
|
|
trip = <&modem_skin_trip0>;
|
|
cooling-device = <&modem_skin 1 1>;
|
|
};
|
|
|
|
modem-skin-cdev1 {
|
|
trip = <&modem_skin_trip1>;
|
|
cooling-device = <&modem_skin 2 2>;
|
|
};
|
|
|
|
modem-skin-cdev2 {
|
|
trip = <&cx_trip>;
|
|
cooling-device = <&modem_skin 3 3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pa-therm0-step {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "step_wise";
|
|
thermal-sensors = <&pm6125_adc_tm ADC5_AMUX_THM1_100K_PU>;
|
|
trips {
|
|
modem_trip0: modem-trip0 {
|
|
temperature = <46000>;
|
|
hysteresis = <4000>;
|
|
type = "passive";
|
|
};
|
|
|
|
modem_trip1: modem-trip1 {
|
|
temperature = <47000>;
|
|
hysteresis = <4000>;
|
|
type = "passive";
|
|
};
|
|
|
|
modem_trip2: modem-trip2 {
|
|
temperature = <54000>;
|
|
hysteresis = <4000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
modem-cdev0 {
|
|
trip = <&modem_trip0>;
|
|
cooling-device = <&modem_pa 1 1>;
|
|
};
|
|
|
|
modem-cdev1 {
|
|
trip = <&modem_trip1>;
|
|
cooling-device = <&modem_pa 2 2>;
|
|
};
|
|
|
|
modem-cdev2 {
|
|
trip = <&modem_trip2>;
|
|
cooling-device = <&modem_pa 3 3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
xo-therm-step {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "step_wise";
|
|
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;
|
|
trips {
|
|
modem_pa_fr1_trip0: modem-pa-fr1-trip0 {
|
|
temperature = <45000>;
|
|
hysteresis = <4000>;
|
|
type = "passive";
|
|
};
|
|
|
|
modem_pa_fr1_trip1: modem-pa-fr1-trip1 {
|
|
temperature = <46000>;
|
|
hysteresis = <4000>;
|
|
type = "passive";
|
|
};
|
|
|
|
modem_pa_fr1_trip2: modem-pa-fr1-trip2 {
|
|
temperature = <56000>;
|
|
hysteresis = <4000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
modem_pa_fr1_cdev0 {
|
|
trip = <&modem_pa_fr1_trip0>;
|
|
cooling-device = <&modem_pa_fr1 1 1>;
|
|
};
|
|
|
|
modem_pa_fr1_cdev1 {
|
|
trip = <&modem_pa_fr1_trip1>;
|
|
cooling-device = <&modem_pa_fr1 2 2>;
|
|
};
|
|
|
|
modem_pa_fr1_cdev2 {
|
|
trip = <&modem_pa_fr1_trip2>;
|
|
cooling-device = <&modem_pa_fr1 3 3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
touch_avdd_default: touch_avdd_default {
|
|
mux {
|
|
pins = "gpio53";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio53";
|
|
drive-strength = <8>;
|
|
bias-disable = <0>;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
touch_avdd: touch_avdd_stub {
|
|
/*
|
|
* Touch eLDO controlled by gpio#53 is always ON.
|
|
* Using dummy regulator.
|
|
*/
|
|
compatible = "qcom,stub-regulator";
|
|
regulator-name = "touch_avdd_stub";
|
|
qcom,hpm-min-load = <10000>;
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3544000>;
|
|
};
|
|
};
|
|
|
|
&qupv3_se8_i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "ok"
|
|
qcom,i2c-touch-active = "focaltech,fts_ts";
|
|
|
|
focaltech@38 {
|
|
compatible = "focaltech,fts_ts";
|
|
reg = <0x38>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <22 0x2008>;
|
|
focaltech,reset-gpio = <&tlmm 21 0x00>;
|
|
focaltech,irq-gpio = <&tlmm 22 0x2008>;
|
|
focaltech,max-touch-number = <5>;
|
|
focaltech,display-coords = <0 0 1080 2340>;
|
|
|
|
vcc_i2c-supply = <&L9A>;
|
|
vdd-supply = <&touch_avdd>;
|
|
|
|
pinctrl-names = "pmx_ts_active", "pmx_ts_suspend",
|
|
"pmx_ts_release";
|
|
pinctrl-0 = <&ts_active>;
|
|
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
|
pinctrl-2 = <&pmx_ts_release>;
|
|
|
|
panel = <&dsi_r66451_amoled_90hz_cmd
|
|
&dsi_r66451_amoled_90hz_video
|
|
&dsi_r66451_amoled_cmd &dsi_r66451_amoled_video>;
|
|
};
|
|
};
|