mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-11-12 01:51:34 -05:00
ace589852b
1.change the reset sequence. 2.change the physical size. 3.change the timing of 11/29. 4.remove the delay time of 10/28 5. add delay time between avee and reset high. Change-Id: I6d3c84b7afa3de2d2f81f208cbb7502e32b7d6f9 Signed-off-by: houdz1 <[email protected]> Reviewed-on: https://gerrit.mot.com/2726463 SME-Granted: SME Approvals Granted SLTApproved: Slta Waiver Tested-by: Jira Key Reviewed-by: Zhihong Kang <[email protected]> Reviewed-by: Guobin Zhang <[email protected]> Submit-Approved: Jira Key
258 lines
7.1 KiB
Devicetree
258 lines
7.1 KiB
Devicetree
#include "dsi-panel-mot-dummy-qhd-video.dtsi"
|
|
#include "dsi-panel-mot-boe-ili9883c-656-720x1612-video.dtsi"
|
|
#include "dsi-panel-mot-txd-nt36528-656-720x1612-video.dtsi"
|
|
|
|
&display_panel_avdd {
|
|
/delete-property/ gpio;
|
|
/delete-property/ pinctrl-0;
|
|
};
|
|
|
|
&tlmm {
|
|
lcd_panel_avdd_default: lcd_panel_avdd_default {
|
|
mux {
|
|
pins = "gpio84";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio84";
|
|
drive-strength = <8>;
|
|
bias-disable = <0>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
lcd_panel_avee_default: lcd_panel_avee_default {
|
|
mux {
|
|
pins = "gpio85";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio85";
|
|
drive-strength = <8>;
|
|
bias-disable = <0>;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
lcd_panel_avdd: lcd_gpio_regulator@0 {
|
|
compatible = "qti-regulator-fixed";
|
|
regulator-name = "lcd_panel_avdd";
|
|
regulator-min-microvolt = <6000000>;
|
|
regulator-max-microvolt = <6000000>;
|
|
regulator-enable-ramp-delay = <233>;
|
|
gpio = <&tlmm 84 0>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
proxy-supply = <&lcd_panel_avdd>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_panel_avdd_default>;
|
|
};
|
|
|
|
lcd_panel_avee: lcd_gpio_regulator@1 {
|
|
compatible = "qti-regulator-fixed";
|
|
regulator-name = "lcd_panel_avee";
|
|
regulator-min-microvolt = <6000000>;
|
|
regulator-max-microvolt = <6000000>;
|
|
regulator-enable-ramp-delay = <233>;
|
|
gpio = <&tlmm 85 0>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
proxy-supply = <&lcd_panel_avee>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&lcd_panel_avee_default>;
|
|
};
|
|
|
|
dsi_panel_pwr_supply_fogo: dsi_panel_pwr_supply_fogo{
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
qcom,panel-supply-entry@0 {
|
|
reg = <0>;
|
|
qcom,supply-name = "vddio";
|
|
qcom,supply-min-voltage = <1800000>;
|
|
qcom,supply-max-voltage = <1800000>;
|
|
qcom,supply-enable-load = <32000>;
|
|
qcom,supply-disable-load = <80>;
|
|
qcom,supply-pre-off-sleep = <2>;
|
|
};
|
|
|
|
qcom,panel-supply-entry@1 {
|
|
reg = <1>;
|
|
qcom,supply-name = "lab";
|
|
qcom,supply-min-voltage = <6000000>;
|
|
qcom,supply-max-voltage = <6000000>;
|
|
qcom,supply-enable-load = <100000>;
|
|
qcom,supply-disable-load = <100>;
|
|
qcom,supply-pre-on-sleep = <3>;
|
|
};
|
|
|
|
qcom,panel-supply-entry@2 {
|
|
reg = <2>;
|
|
qcom,supply-name = "ibb";
|
|
qcom,supply-min-voltage = <6000000>;
|
|
qcom,supply-max-voltage = <6000000>;
|
|
qcom,supply-enable-load = <100000>;
|
|
qcom,supply-disable-load = <100>;
|
|
qcom,supply-pre-on-sleep = <3>;
|
|
qcom,supply-pre-off-sleep = <30>;
|
|
qcom,supply-post-on-sleep = <5>;
|
|
qcom,supply-post-off-sleep = <3>;
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
&sde_dsi {
|
|
/delete-property/ lab-supply;
|
|
/delete-property/ ibb-supply;
|
|
/delete-property/ vddio-supply;
|
|
/delete-property/ qcom,dsi-default-panel;
|
|
/delete-property/ avdd-supply;
|
|
|
|
lab-supply = <&lcd_panel_avdd>;
|
|
ibb-supply = <&lcd_panel_avee>;
|
|
vddio-supply = <&L13A>;
|
|
|
|
qcom,dsi-default-panel = <&dsi_boe_ili9883c_656_hd_plus_120_video>;
|
|
};
|
|
|
|
&dsi_boe_ili9883c_656_hd_plus_120_video{
|
|
qcom,platform-te-gpio = <&tlmm 23 0>;
|
|
qcom,platform-reset-gpio = <&pmr735a_gpios 2 0>;
|
|
|
|
qcom,dsi-supported-dfps-list = <120 90 60>;
|
|
qcom,mdss-dsi-pan-enable-dynamic-fps;
|
|
qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp";
|
|
/*qcom,mdss-dsi-pan-dfps-send-command;*/
|
|
qcom,mdss-dsi-pan-on-fps = <120>;
|
|
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_fogo>;
|
|
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
|
|
qcom,mdss-dsi-bl-min-level = <13>;
|
|
qcom,mdss-dsi-bl-max-level = <1650>;
|
|
qcom,mdss-dsi-bl-default-level = <745>;
|
|
qcom,mdss-brightness-max-level = <1650>;
|
|
qcom,bklt-dcs-2bytes-enabled;
|
|
|
|
qcom,mdss-dsi-no-panel-on-read-support;
|
|
|
|
/* qcom,mdss-dsi-panel-hdr-enable;
|
|
qcom,mdss-dsi-panel-hdr-color-primaries = <14950 15750 34000
|
|
16000 13000 35500 7000 2500>;
|
|
qcom,mdss-dsi-panel-peak-brightness = <5000000>;
|
|
qcom,mdss-dsi-panel-blackness-level = <100>;
|
|
*/
|
|
qcom,tp_state_check_enable;
|
|
qcom,platform-need-execute-shutdown;
|
|
qcom,esd-check-enabled;
|
|
qcom,mdss-dsi-panel-status-check-mode = "reg_read";
|
|
qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0A];
|
|
qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
|
|
qcom,mdss-dsi-panel-status-value = <0x9C>;
|
|
qcom,mdss-dsi-panel-status-read-length = <1>;
|
|
qcom,suspend-ulps-enabled;
|
|
qcom,mdss-dsi-panel-hbm-is-51cmd;
|
|
qcom,mdss-dsi-hbm-type = "lcd-dcs-wled";
|
|
qcom,mdss-dsi-hbm-on-command = [39 01 00 00 00 00 03 51 07 FF];
|
|
qcom,mdss-dsi-hbm-on-command-state = "dsi_lp_mode";
|
|
qcom,mdss-dsi-hbm-off-command = [39 01 00 00 00 00 03 51 06 66];
|
|
qcom,mdss-dsi-hbm-off-command-state = "dsi_lp_mode";
|
|
|
|
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
|
|
|
|
qcom,mdss-dsi-display-timings {
|
|
timing@0 {
|
|
qcom,mdss-dsi-panel-phy-timings = [00 27 0A 0A 1B 19 0A
|
|
0B 0A 02 04 00 20 0F];
|
|
|
|
qcom,display-topology = <1 0 1>;
|
|
qcom,default-topology-index = <0>;
|
|
};
|
|
};
|
|
};
|
|
&dsi_txd_nt36528_656_hd_plus_120_video{
|
|
qcom,platform-te-gpio = <&tlmm 23 0>;
|
|
qcom,platform-reset-gpio = <&pmr735a_gpios 2 0>;
|
|
|
|
qcom,dsi-supported-dfps-list = <120 90 60>;
|
|
qcom,mdss-dsi-pan-enable-dynamic-fps;
|
|
qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp";
|
|
/*qcom,mdss-dsi-pan-dfps-send-command;*/
|
|
qcom,mdss-dsi-pan-on-fps = <120>;
|
|
|
|
qcom,panel-supply-entries = <&dsi_panel_pwr_supply_fogo>;
|
|
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
|
|
qcom,mdss-dsi-bl-min-level = <13>;
|
|
qcom,mdss-dsi-bl-max-level = <1650>;
|
|
qcom,mdss-dsi-bl-default-level = <745>;
|
|
qcom,mdss-brightness-max-level = <1650>;
|
|
qcom,bklt-dcs-2bytes-enabled;
|
|
|
|
qcom,mdss-dsi-no-panel-on-read-support;
|
|
|
|
/* qcom,mdss-dsi-panel-hdr-enable;
|
|
qcom,mdss-dsi-panel-hdr-color-primaries = <14950 15750 34000
|
|
16000 13000 35500 7000 2500>;
|
|
qcom,mdss-dsi-panel-peak-brightness = <5000000>;
|
|
qcom,mdss-dsi-panel-blackness-level = <100>;
|
|
*/
|
|
qcom,tp_state_check_enable;
|
|
qcom,platform-need-execute-shutdown;
|
|
qcom,esd-check-enabled;
|
|
qcom,mdss-dsi-panel-status-check-mode = "reg_read";
|
|
qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0A];
|
|
qcom,mdss-dsi-panel-status-command-state = "dsi_lp_mode";
|
|
qcom,mdss-dsi-panel-status-value = <0x9C>;
|
|
qcom,mdss-dsi-panel-status-read-length = <1>;
|
|
qcom,suspend-ulps-enabled;
|
|
qcom,mdss-dsi-panel-hbm-is-51cmd;
|
|
qcom,mdss-dsi-hbm-type = "lcd-dcs-wled";
|
|
qcom,mdss-dsi-hbm-on-command = [39 01 00 00 00 00 03 51 07 FF];
|
|
qcom,mdss-dsi-hbm-on-command-state = "dsi_lp_mode";
|
|
qcom,mdss-dsi-hbm-off-command = [39 01 00 00 00 00 03 51 06 66];
|
|
qcom,mdss-dsi-hbm-off-command-state = "dsi_lp_mode";
|
|
|
|
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
|
|
|
|
qcom,mdss-dsi-display-timings {
|
|
timing@0 {
|
|
qcom,mdss-dsi-panel-phy-timings = [00 29 0B 0B 1B 1A 0B
|
|
0B 0A 02 04 00 22 10];
|
|
|
|
qcom,display-topology = <1 0 1>;
|
|
qcom,default-topology-index = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mot_dummy_vid_qhd {
|
|
qcom,platform-te-gpio = <&tlmm 23 0>;
|
|
qcom,platform-reset-gpio = <&pmr735a_gpios 2 0>;
|
|
|
|
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dummy";
|
|
|
|
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
|
|
|
|
qcom,mdss-dsi-display-timings {
|
|
timing@0 {
|
|
qcom,mdss-dsi-panel-phy-timings = [00 0B 02 02 1C 1C 03
|
|
02 01 02 04 00 0C 12];
|
|
qcom,display-topology = <1 0 1>;
|
|
qcom,default-topology-index = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qupv3_se10_i2c_sleep {
|
|
config {
|
|
/delete-property/ bias-disable;
|
|
bias-pull-up;
|
|
input-enable;
|
|
};
|
|
};
|