Huang Shijie
7caa4fd290
mtd: gpmi: imx6: fix the wrong method for checking ready/busy
...
In the imx6, all the ready/busy pins are binding togeter.
So we should always check the ready/busy pin of the chip 0.
In the other word, when the CS1 is enabled, we should also check the
ready/busy of chip 0; if we check the ready/busy of chip 1,
we will get the wrong result.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-11-06 23:33:03 -08:00
..
chips
mtd: jedec_probe: fix LH28F640BF definition
2013-08-05 21:04:17 +01:00
devices
mtd: Move major number definitions to major.h
2013-11-06 23:32:59 -08:00
lpddr
mtd: lpddr_cmds: make function static
2013-10-27 16:27:03 -07:00
maps
mtd: plat-ram: Use module_platform_driver
2013-11-06 23:32:55 -08:00
nand
mtd: gpmi: imx6: fix the wrong method for checking ready/busy
2013-11-06 23:33:03 -08:00
onenand
mtd: onenand: omap: remove two unused functions
2013-10-27 16:27:03 -07:00
tests
mtd: nand: add a helper to detect the nand type
2013-10-27 16:27:06 -07:00
ubi
mtd: Move major number definitions to major.h
2013-11-06 23:32:59 -08:00
afs.c
ar7part.c
bcm47xxpart.c
mtd: bcm47xxpart: detect "factory" partition
2013-11-06 23:32:58 -08:00
bcm63xxpart.c
mtd: bcm63xxpart: use nvram for PSI size
2013-08-05 18:59:34 +01:00
cmdlinepart.c
ftl.c
inftlcore.c
mtd: nand: add a helper to detect the nand type
2013-10-27 16:27:06 -07:00
inftlmount.c
Kconfig
Makefile
mtd_blkdevs.c
mtdblock.c
mtd: Move major number definitions to major.h
2013-11-06 23:32:59 -08:00
mtdblock_ro.c
mtd: Move major number definitions to major.h
2013-11-06 23:32:59 -08:00
mtdchar.c
mtd: Move major number definitions to major.h
2013-11-06 23:32:59 -08:00
mtdconcat.c
mtdcore.c
mtd: Move major number definitions to major.h
2013-11-06 23:32:59 -08:00
mtdcore.h
mtdoops.c
mtdpart.c
mtd: set the ecc step size for master/slave mtd_info
2013-08-30 21:38:02 +01:00
mtdsuper.c
mtd: Move major number definitions to major.h
2013-11-06 23:32:59 -08:00
mtdswap.c
mtd: mtdswap: replace strict_strtoul() with kstrtoul()
2013-08-30 21:52:51 +01:00
nftlcore.c
mtd: nand: add a helper to detect the nand type
2013-10-27 16:27:06 -07:00
nftlmount.c
ofpart.c
mtd: ofpart: use for_each_child_of_node() macro
2013-08-30 21:52:57 +01:00
redboot.c
rfd_ftl.c
sm_ftl.c
mtd: sm_ftl: Staticize local symbols
2013-08-30 21:51:25 +01:00
sm_ftl.h
ssfdc.c
mtd: nand: add a helper to detect the nand type
2013-10-27 16:27:06 -07:00