mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-06 11:54:14 -04:00
| Filename | Latest commit message | Latest commit date |
|---|---|---|
9ab3a1aaa5
[ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ] Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before reading data from the EEPROM. The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing of the op-code/address from the host to the EEPROM and the reading of the actual data from the EEPROM. More info can be found on page 6 of the AT93C46 datasheet (linked below). Similar notes are found in other 93xx6 datasheets. In summary the read operation for a 93Cx6 EEPROM is: Write to EEPROM: 110[A5-A0] (9 bits) Read from EEPROM: 0[D15-D0] (17 bits) Where: 110 is the start bit and READ OpCode [A5-A0] is the address to read from 0 is a "dummy bit" preceding the actual data [D15-D0] is the actual data. Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy bit should be clocked out on the last address bit clock cycle meaning it should be discarded naturally. However, depending on the hardware configuration sometimes this dummy bit is not discarded. This is the case with Exar PCI UARTs which require an extra clock cycle between sending the address and reading the data. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> |
||
| .. | ||
| altera-stapl | ||
| c2port | ||
| cardreader | ||
| cb710 | ||
| cxl | ||
| echo | ||
| eeprom | ||
| genwqe | ||
| habanalabs | ||
| ibmasm | ||
| lis3lv02d | ||
| lkdtm | ||
| mei | ||
| mic | ||
| ocxl | ||
| sgi-gru | ||
| sgi-xp | ||
| ti-st | ||
| vmw_vmci | ||
| ad525x_dpot-i2c.c | ||
| ad525x_dpot-spi.c | ||
| ad525x_dpot.c | ||
| ad525x_dpot.h | ||
| apds990x.c | ||
| apds9802als.c | ||
| atmel-ssc.c | ||
| atmel_tclib.c | ||
| bh1770glc.c | ||
| cs5535-mfgpt.c | ||
| ds1682.c | ||
| dummy-irq.c | ||
| enclosure.c | ||
| fastrpc.c | ||
| hmc6352.c | ||
| hpilo.c | ||
| hpilo.h | ||
| ibmvmc.c | ||
| ibmvmc.h | ||
| ics932s401.c | ||
| isl29003.c | ||
| isl29020.c | ||
| Kconfig | ||
| kgdbts.c | ||
| lattice-ecp3-config.c | ||
| Makefile | ||
| pch_phub.c | ||
| pci_endpoint_test.c | ||
| phantom.c | ||
| pti.c | ||
| pvpanic.c | ||
| qcom-coincell.c | ||
| sram-exec.c | ||
| sram.c | ||
| sram.h | ||
| tifm_7xx1.c | ||
| tifm_core.c | ||
| tsl2550.c | ||
| vexpress-syscfg.c | ||
| vmw_balloon.c | ||
| xilinx_sdfec.c | ||