android_kernel_motorola_sm6375/qcom/lahaina-thermal.dtsi
Priyansh Jain e69f4f590f ARM: dts: qcom: Update cpu voltage cooling device node
Add cpu voltage cooling device devicetree node.

Change-Id: I7d83cd625f4b80136f2cec656e22188e6283f8fe
2022-08-02 23:10:56 -07:00

1482 lines
27 KiB
Devicetree

#include <dt-bindings/thermal/thermal_qti.h>
#include "lahaina-thermal-modem.dtsi"
&qmi_tmd {
cdsp {
qcom,instance-id = <QMI_CDSP_INST_ID>;
cdsp_sw: cdsp {
qcom,qmi-dev-name = "cdsp_sw";
#cooling-cells = <2>;
};
cdsp_hw: cdsp_hw {
qcom,qmi-dev-name = "cdsp_hw";
#cooling-cells = <2>;
};
};
};
&soc {
mx_sdpm@0x00636000 {
compatible = "qcom,sdpm";
reg = <0x00636000 0x1000>;
clock-names = "cam_cc_ipe", "video_cc_mvs0", "gcc_gp1";
clocks = <&clock_camcc CAM_CC_IPE_0_CLK_SRC>,
<&clock_videocc VIDEO_CC_MVS0_CLK_SRC>,
<&clock_gcc GCC_GP1_CLK_SRC>;
cam_cc_ipe-supply = <&cam_cc_ipe_0_gdsc>;
video_cc_mvs0-supply = <&video_cc_mvs0_gdsc>;
csr-id = <1 3 5>;
};
cx_sdpm@0x00634000 {
compatible = "qcom,sdpm";
reg = <0x00634000 0x1000>;
clock-names = "cam_cc_csi0phytiimer", "ufs_phy";
clocks = <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
<&clock_gcc GCC_UFS_PHY_AXI_CLK_SRC>;
cam_cc_csi0phytiimer-supply = <&cam_cc_ipe_0_gdsc>;
csr-id = <5 7>;
};
mx_pe: mx_rdpm_pe@0x00637000 {
compatible = "qcom,policy-engine";
#thermal-sensor-cells = <0>;
reg = <0x00637000 0x1000>;
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
};
cx_pe: cx_rdpm_pe@0x00635000 {
compatible = "qcom,policy-engine";
#thermal-sensor-cells = <0>;
reg = <0x00635000 0x1000>;
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
};
ddr_cdev: qcom,ddr-cdev {
compatible = "qcom,ddr-cooling-device";
#cooling-cells = <2>;
qcom,ddr-freq = <0>,
<1720000>,
<2086000>,
<2597000>,
<2929000>,
<3879000>,
<5161000>,
<5931000>,
<6515000>,
<7980000>,
<8136000>,
<10437000>,
<12191000>;
interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
};
};
&cpufreq_hw {
qcom,cpu-isolation {
compatible = "qcom,cpu-isolate";
cpu0_isolate: cpu0-isolate {
qcom,cpu = <&CPU0>;
#cooling-cells = <2>;
};
cpu1_isolate: cpu1-isolate {
qcom,cpu = <&CPU1>;
#cooling-cells = <2>;
};
cpu2_isolate: cpu2-isolate {
qcom,cpu = <&CPU2>;
#cooling-cells = <2>;
};
cpu3_isolate: cpu3-isolate {
qcom,cpu = <&CPU3>;
#cooling-cells = <2>;
};
cpu4_isolate: cpu4-isolate {
qcom,cpu = <&CPU4>;
#cooling-cells = <2>;
};
cpu5_isolate: cpu5-isolate {
qcom,cpu = <&CPU5>;
#cooling-cells = <2>;
};
cpu6_isolate: cpu6-isolate {
qcom,cpu = <&CPU6>;
#cooling-cells = <2>;
};
cpu7_isolate: cpu7-isolate {
qcom,cpu = <&CPU7>;
#cooling-cells = <2>;
};
};
qcom,cpu-hotplug {
compatible = "qcom,cpu-hotplug";
cpu0_hotplug: cpu0-hotplug {
qcom,cpu = <&CPU0>;
#cooling-cells = <2>;
};
cpu1_hotplug: cpu1-hotplug {
qcom,cpu = <&CPU1>;
#cooling-cells = <2>;
};
cpu2_hotplug: cpu2-hotplug {
qcom,cpu = <&CPU2>;
#cooling-cells = <2>;
};
cpu3_hotplug: cpu3-hotplug {
qcom,cpu = <&CPU3>;
#cooling-cells = <2>;
};
cpu4_hotplug: cpu4-hotplug {
qcom,cpu = <&CPU4>;
#cooling-cells = <2>;
};
cpu5_hotplug: cpu5-hotplug {
qcom,cpu = <&CPU5>;
#cooling-cells = <2>;
};
cpu6_hotplug: cpu6-hotplug {
qcom,cpu = <&CPU6>;
#cooling-cells = <2>;
};
cpu7_hotplug: cpu7-hotplug {
qcom,cpu = <&CPU7>;
#cooling-cells = <2>;
};
};
qcom,limits-dcvs {
compatible = "qcom,msm-hw-limits";
isens_vref_0p8-supply = <&pm8350_l5_ao>;
isens-vref-0p8-settings = <880000 880000 30000>;
isens_vref_1p8-supply = <&pm8350c_l1_ao>;
isens-vref-1p8-settings = <1800000 1800000 20000>;
};
qcom,cpu-voltage-cdev {
compatible = "qcom,cc-cooling-devices";
apc1_cluster: thermal-cluster-4-7 {
qcom,cluster0 = <&CPU4 &CPU5 &CPU6>;
qcom,cluster1 = <&CPU7>;
#cooling-cells = <2>;
};
};
};
&msm_gpu {
#cooling-cells = <2>;
};
&thermal_zones {
cpu-0-0-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&tsens0 1>;
trips {
cpu00_config: cpu00-config {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
cpu00_config1: cpu00-config1 {
temperature = <112000>;
hysteresis = <12000>;
type = "passive";
};
};
cooling-maps {
cpu00_cdev {
trip = <&cpu00_config>;
cooling-device = <&cpu0_isolate 1 1>;
};
cpu00_cdev2 {
trip = <&cpu00_config1>;
cooling-device = <&cpu0_hotplug 1 1>;
};
};
};
cpu-0-1-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&tsens0 2>;
trips {
cpu01_config: cpu01-config {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
cpu01_config1: cpu01-config1 {
temperature = <112000>;
hysteresis = <12000>;
type = "passive";
};
};
cooling-maps {
cpu01_cdev {
trip = <&cpu01_config>;
cooling-device = <&cpu1_isolate 1 1>;
};
cpu01_cdev2 {
trip = <&cpu01_config1>;
cooling-device = <&cpu1_hotplug 1 1>;
};
};
};
cpu-0-2-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&tsens0 3>;
trips {
cpu02_config: cpu02-config {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
cpu02_config1: cpu02-config1 {
temperature = <112000>;
hysteresis = <12000>;
type = "passive";
};
};
cooling-maps {
cpu02_cdev {
trip = <&cpu02_config>;
cooling-device = <&cpu2_isolate 1 1>;
};
cpu02_cdev2 {
trip = <&cpu02_config1>;
cooling-device = <&cpu2_hotplug 1 1>;
};
};
};
cpu-0-3-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 4>;
thermal-governor = "step_wise";
trips {
cpu03_config: cpu03-config {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
cpu03_config1: cpu03-config1 {
temperature = <112000>;
hysteresis = <12000>;
type = "passive";
};
};
cooling-maps {
cpu03_cdev {
trip = <&cpu03_config>;
cooling-device = <&cpu3_isolate 1 1>;
};
cpu03_cdev2 {
trip = <&cpu03_config1>;
cooling-device = <&cpu3_hotplug 1 1>;
};
};
};
cpu-1-0-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 7>;
thermal-governor = "step_wise";
trips {
cpu10_config: cpu10-config {
temperature = <108000>;
hysteresis = <8000>;
type = "passive";
};
cpu10_config1: cpu10-config1 {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
};
cooling-maps {
cpu10_cdev {
trip = <&cpu10_config>;
cooling-device = <&cpu4_isolate 1 1>;
};
cpu10_cdev1 {
trip = <&cpu10_config>;
cooling-device = <&CPU4 THERMAL_MAX_LIMIT
THERMAL_MAX_LIMIT>;
};
cpu10_cdev2 {
trip = <&cpu10_config1>;
cooling-device = <&cpu4_hotplug 1 1>;
};
};
};
cpu-1-1-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 8>;
thermal-governor = "step_wise";
trips {
cpu11_config: cpu11-config {
temperature = <108000>;
hysteresis = <8000>;
type = "passive";
};
cpu11_config1: cpu11-config1 {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
};
cooling-maps {
cpu11_cdev {
trip = <&cpu11_config>;
cooling-device = <&cpu4_isolate 1 1>;
};
cpu11_cdev1 {
trip = <&cpu11_config>;
cooling-device = <&CPU4 THERMAL_MAX_LIMIT
THERMAL_MAX_LIMIT>;
};
cpu11_cdev2 {
trip = <&cpu11_config1>;
cooling-device = <&cpu4_hotplug 1 1>;
};
};
};
cpu-1-2-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 9>;
thermal-governor = "step_wise";
trips {
cpu12_config: cpu12-config {
temperature = <108000>;
hysteresis = <8000>;
type = "passive";
};
cpu12_config1: cpu12-config1 {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
};
cooling-maps {
cpu12_cdev {
trip = <&cpu12_config>;
cooling-device = <&cpu5_isolate 1 1>;
};
cpu12_cdev1 {
trip = <&cpu12_config>;
cooling-device = <&CPU4 THERMAL_MAX_LIMIT
THERMAL_MAX_LIMIT>;
};
cpu12_cdev2 {
trip = <&cpu12_config1>;
cooling-device = <&cpu5_hotplug 1 1>;
};
};
};
cpu-1-3-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 10>;
thermal-governor = "step_wise";
trips {
cpu13_config: cpu13-config {
temperature = <108000>;
hysteresis = <8000>;
type = "passive";
};
cpu13_config1: cpu13-config1 {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
};
cooling-maps {
cpu13_cdev {
trip = <&cpu13_config>;
cooling-device = <&cpu5_isolate 1 1>;
};
cpu13_cdev1 {
trip = <&cpu13_config>;
cooling-device = <&CPU4 THERMAL_MAX_LIMIT
THERMAL_MAX_LIMIT>;
};
cpu13_cdev2 {
trip = <&cpu13_config1>;
cooling-device = <&cpu5_hotplug 1 1>;
};
};
};
cpu-1-4-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 11>;
thermal-governor = "step_wise";
trips {
cpu14_config: cpu14-config {
temperature = <108000>;
hysteresis = <8000>;
type = "passive";
};
cpu14_config1: cpu14-config1 {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
};
cooling-maps {
cpu14_cdev {
trip = <&cpu14_config>;
cooling-device = <&cpu6_isolate 1 1>;
};
cpu14_cdev1 {
trip = <&cpu14_config>;
cooling-device = <&CPU4 THERMAL_MAX_LIMIT
THERMAL_MAX_LIMIT>;
};
cpu14_cdev2 {
trip = <&cpu14_config1>;
cooling-device = <&cpu6_hotplug 1 1>;
};
};
};
cpu-1-5-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 12>;
thermal-governor = "step_wise";
trips {
cpu15_config: cpu15-config {
temperature = <108000>;
hysteresis = <8000>;
type = "passive";
};
cpu15_config1: cpu15-config1 {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
};
cooling-maps {
cpu15_cdev {
trip = <&cpu15_config>;
cooling-device = <&cpu6_isolate 1 1>;
};
cpu15_cdev1 {
trip = <&cpu15_config>;
cooling-device = <&CPU4 THERMAL_MAX_LIMIT
THERMAL_MAX_LIMIT>;
};
cpu15_cdev2 {
trip = <&cpu15_config1>;
cooling-device = <&cpu6_hotplug 1 1>;
};
};
};
cpu-1-6-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 13>;
thermal-governor = "step_wise";
trips {
cpu16_config: cpu16-config {
temperature = <108000>;
hysteresis = <8000>;
type = "passive";
};
cpu16_config1: cpu16-config1 {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
};
cooling-maps {
cpu16_cdev {
trip = <&cpu16_config>;
cooling-device = <&cpu7_isolate 1 1>;
};
cpu16_cdev1 {
trip = <&cpu16_config>;
cooling-device = <&CPU7 THERMAL_MAX_LIMIT
THERMAL_MAX_LIMIT>;
};
cpu16_cdev2 {
trip = <&cpu16_config1>;
cooling-device = <&cpu7_hotplug 1 1>;
};
};
};
cpu-1-7-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tsens0 14>;
thermal-governor = "step_wise";
trips {
cpu17_config: cpu17-config {
temperature = <108000>;
hysteresis = <8000>;
type = "passive";
};
cpu17_config1: cpu17-config1 {
temperature = <110000>;
hysteresis = <10000>;
type = "passive";
};
};
cooling-maps {
cpu17_cdev {
trip = <&cpu17_config>;
cooling-device = <&cpu7_isolate 1 1>;
};
cpu17_cdev1 {
trip = <&cpu17_config>;
cooling-device = <&CPU7 THERMAL_MAX_LIMIT
THERMAL_MAX_LIMIT>;
};
cpu17_cdev2 {
trip = <&cpu17_config1>;
cooling-device = <&cpu7_hotplug 1 1>;
};
};
};
gpuss-0-step {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&tsens1 1>;
trips {
gpuss0_config: active-config0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
};
cooling-maps {
gpu_cdev {
trip = <&gpuss0_config>;
cooling-device = <&msm_gpu THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
};
};
gpuss-1-step {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&tsens1 2>;
trips {
gpuss1_config: active-config0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
};
cooling-maps {
gpu_cdev {
trip = <&gpuss1_config>;
cooling-device = <&msm_gpu THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
};
};
nspss-0-step {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&tsens1 3>;
trips {
nspss0_config: active-config0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
nspss0_config1: active-config1 {
temperature = <105000>;
hysteresis = <10000>;
type = "passive";
};
};
cooling-maps {
nsp_cdev {
trip = <&nspss0_config>;
cooling-device = <&cdsp_sw THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
nsp_cdev1 {
trip = <&nspss0_config1>;
cooling-device = <&cdsp_sw THERMAL_MAX_LIMIT
THERMAL_MAX_LIMIT>;
};
};
};
nspss-1-step {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&tsens1 4>;
trips {
nspss1_config: active-config0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
nspss1_config1: active-config1 {
temperature = <105000>;
hysteresis = <10000>;
type = "passive";
};
};
cooling-maps {
nsp_cdev {
trip = <&nspss1_config>;
cooling-device = <&cdsp_sw THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
nsp_cdev1 {
trip = <&nspss1_config1>;
cooling-device = <&cdsp_sw THERMAL_MAX_LIMIT
THERMAL_MAX_LIMIT>;
};
};
};
nspss-2-step {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-governor = "step_wise";
thermal-sensors = <&tsens1 5>;
trips {
nspss2_config: active-config0 {
temperature = <95000>;
hysteresis = <0>;
type = "passive";
};
nspss2_config1: active-config1 {
temperature = <105000>;
hysteresis = <10000>;
type = "passive";
};
};
cooling-maps {
nsp_cdev {
trip = <&nspss2_config>;
cooling-device = <&cdsp_sw THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
nsp_cdev1 {
trip = <&nspss2_config1>;
cooling-device = <&cdsp_sw THERMAL_MAX_LIMIT
THERMAL_MAX_LIMIT>;
};
};
};
pop-mem-step {
polling-delay-passive = <10>;
polling-delay = <0>;
thermal-sensors = <&tsens1 7>;
thermal-governor = "step_wise";
trips {
pop_trip: pop-trip {
temperature = <90000>;
hysteresis = <0>;
type = "passive";
};
pop_trip1: pop-trip1 {
temperature = <90000>;
hysteresis = <5000>;
type = "passive";
};
};
cooling-maps {
pop_cdev {
trip = <&pop_trip>;
cooling-device =
<&apc1_cluster THERMAL_NO_LIMIT
THERMAL_NO_LIMIT>;
};
pop_cdev1 {
trip = <&pop_trip1>;
cooling-device = <&ddr_cdev 5 5>;
};
};
};
aoss-0-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-0-0-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 1>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-0-1-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 2>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-0-2-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 3>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-0-3-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 4>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpuss-0-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 5>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpuss-1-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 6>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-1-0-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 7>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-1-1-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 8>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-1-2-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 9>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-1-3-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 10>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-1-4-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 11>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-1-5-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 12>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-1-6-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 13>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
cpu-1-7-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens0 14>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
aoss-1-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
gpuss-0-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 1>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
gpuss-1-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 2>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
nspss-0-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 3>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
nspss-1-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 4>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
nspss-2-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 5>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
video-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 6>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
ddr-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 7>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
mdmss-0-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 8>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
mdmss-1-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 9>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
mdmss-2-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 10>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
mdmss-3-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 11>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
camera-0-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 12>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
camera-1-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&tsens1 13>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
reset-mon-cfg {
temperature = <115000>;
hysteresis = <5000>;
type = "passive";
};
};
};
mx-pe-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&mx_pe>;
thermal-governor = "step_wise";
trips {
mx_pe_config1: mx-pe-config1 {
temperature = <1>;
hysteresis = <1>;
type = "passive";
};
mx_pe_config2: mx-pe-config2 {
temperature = <2>;
hysteresis = <1>;
type = "passive";
};
mx_pe_config3: mx-pe-config3 {
temperature = <3>;
hysteresis = <1>;
type = "passive";
};
};
cooling-maps {
mx_pe_cdev_1 {
trip = <&mx_pe_config1>;
cooling-device = <&cdsp_sw 1 1>;
};
mx_pe_cdev_2 {
trip = <&mx_pe_config2>;
cooling-device = <&msm_gpu 1 1>;
};
mx_pe_cdev_3 {
trip = <&mx_pe_config3>;
cooling-device = <&modem_tj 1 1>;
};
};
};
cx-pe-step {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&cx_pe>;
thermal-governor = "step_wise";
trips {
cx_pe_config1: cx-pe-config1 {
temperature = <1>;
hysteresis = <1>;
type = "passive";
};
cx_pe_config2: cx-pe-config2 {
temperature = <2>;
hysteresis = <1>;
type = "passive";
};
cx_pe_config3: cx-pe-config3 {
temperature = <3>;
hysteresis = <1>;
type = "passive";
};
cx_pe_config4: cx-pe-config4 {
temperature = <4>;
hysteresis = <1>;
type = "passive";
};
cx_pe_config5: cx-pe-config5 {
temperature = <5>;
hysteresis = <2>;
type = "passive";
};
};
cooling-maps {
cx_pe_cdev_1 {
trip = <&cx_pe_config1>;
cooling-device = <&cdsp_sw 1 1>;
};
cx_pe_cdev_2 {
trip = <&cx_pe_config2>;
cooling-device = <&cdsp_sw 2 2>;
};
cx_pe_cdev_3 {
trip = <&cx_pe_config3>;
cooling-device = <&cdsp_sw 3 3>;
};
cx_pe_cdev_5 {
trip = <&cx_pe_config5>;
cooling-device = <&cdsp_sw 4 4>;
};
};
};
};