mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-31 04:01:48 -04:00
92b767dec9
Details: include camera/blair-camera-sensor-mot-fogo-overlay.dtsi Change-Id: I4ad560e86555c6393e89de8b164eeec01f8b59c6 Signed-off-by: Simon C <[email protected]> Reviewed-on: https://gerrit.mot.com/2667824 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: <[email protected]> Reviewed-by: <[email protected]> Reviewed-by: <[email protected]> Reviewed-by: Zhichao Chen <[email protected]> Submit-Approved: Jira Key
525 lines
11 KiB
Devicetree
525 lines
11 KiB
Devicetree
/* Copyright (c) 2023, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#include "holi-audio-fogo-overlay.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include "holi-pmic-overlay-pm6125.dtsi"
|
|
#include "holi-thermal-overlay-pm6125.dtsi"
|
|
#include "display/holi-sde-display-mtp-pm6125.dtsi"
|
|
#include "display/blair-sde-display-mtp.dtsi"
|
|
#include "fogo-fps-overlay.dtsi"
|
|
#include "fogo-display.dtsi"
|
|
#include "fogo-touchscreen.dtsi"
|
|
#include "fogo-sensors.dtsi"
|
|
#include "camera/blair-camera-sensor-mot-fogo-overlay.dtsi"
|
|
#include "fogo-wl286xx.dtsi"
|
|
#include "moto_therm_sys_temp.dtsi"
|
|
#include "blair-fogo-fmr-overlay.dtsi"
|
|
|
|
&wcd937x_codec {
|
|
cdc-vdd-rxtx-supply = <&L9A>;
|
|
cdc-vddpx-supply = <&L9A>;
|
|
qcom,cdc-static-supplies = "cdc-vdd-rxtx",
|
|
"cdc-vddpx";
|
|
/*
|
|
* Overriding cdc-vdd-mic-bias-supply to dummy value
|
|
* to avoid compilation errors as BOB is not definied
|
|
* for pm6125
|
|
*/
|
|
cdc-vdd-mic-bias-supply = <>;
|
|
};
|
|
|
|
&pm7250b_vib {
|
|
qcom,vib-ldo-volt-uv = <3000000>;
|
|
qcom,vib-dis-short-long;
|
|
qcom,vib-dis-short-long-val = <70>;
|
|
qcom,vib-ldo-volt-uv-long = <2600000>;
|
|
};
|
|
|
|
&tlmm {
|
|
nfc {
|
|
nfc_int_active: nfc_int_active {
|
|
/* active state */
|
|
mux {
|
|
/* GPIO 9: NFC Read Interrupt */
|
|
pins = "gpio9";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio9";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
nfc_int_suspend: nfc_int_suspend {
|
|
/* sleep state */
|
|
mux {
|
|
/* GPIO 9: NFC Read Interrupt */
|
|
pins = "gpio9";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio9";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
nfc_enable_active: nfc_enable_active {
|
|
mux {
|
|
pins = "gpio48";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio48";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
nfc_enable_suspend: nfc_enable_suspend {
|
|
mux {
|
|
pins = "gpio48";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio48";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
|
|
nfc_clk_req_active: nfc_clk_req_active {
|
|
/* active state */
|
|
mux {
|
|
/* GPIO 7: NFC CLK Req*/
|
|
pins = "gpio7";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio7";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
nfc_clk_req_suspend: nfc_clk_req_suspend {
|
|
/* sleep state */
|
|
mux {
|
|
/* GPIO 7: NFC CLK Req */
|
|
pins = "gpio7";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio7";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Dummy LDO reference */
|
|
&sdhc_1 {
|
|
status = "ok"
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc1_on>;
|
|
pinctrl-1 = <&sdc1_off>;
|
|
|
|
vdd-supply = <&L24A>;
|
|
qcom,vdd-voltage-level = <2960000 2960000>;
|
|
qcom,vdd-current-level = <0 570000>;
|
|
|
|
vdd-io-supply = <&L11A>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-lpm-sup;
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
|
qcom,vdd-io-current-level = <0 325000>;
|
|
};
|
|
|
|
&sdhc_2 {
|
|
status = "ok"
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_on>;
|
|
pinctrl-1 = <&sdc2_off>;
|
|
|
|
vdd-supply = <&L22A>;
|
|
qcom,vdd-voltage-level = <2960000 2960000>;
|
|
qcom,vdd-current-level = <0 800000>;
|
|
|
|
vdd-io-supply = <&L5A>;
|
|
qcom,vdd-io-voltage-level = <1800000 2960000>;
|
|
qcom,vdd-io-current-level = <0 22000>;
|
|
|
|
cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&ufsphy_mem {
|
|
compatible = "qcom,ufs-phy-qmp-v4-yupik";
|
|
|
|
vdda-phy-supply = <&L7A>;
|
|
vdda-pll-supply = <&L4A>;
|
|
vdda-phy-max-microamp = <85700>;
|
|
vdda-pll-max-microamp = <18300>;
|
|
|
|
status = "ok"
|
|
};
|
|
|
|
&ufshc_mem {
|
|
vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
|
|
vdd-hba-fixed-regulator;
|
|
|
|
vcc-supply = <&L24A>;
|
|
vcc-voltage-level = <2950000 2960000>;
|
|
vcc-max-microamp = <800000>;
|
|
|
|
vccq2-supply = <&L11A>;
|
|
vccq2-max-microamp = <800000>;
|
|
vccq2-voltage-level = <1800000 1800000>;
|
|
|
|
qcom,vddp-ref-clk-supply = <&L4A>;
|
|
qcom,vddp-ref-clk-max-microamp = <100>;
|
|
|
|
status = "ok"
|
|
};
|
|
|
|
&pmk8350_vadc {
|
|
pmk8350_qtm_n_therm {
|
|
reg = <PMK8350_ADC7_AMUX_THM2_100K_PU>;
|
|
label = "pmk8350_qtm_n_therm";
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
};
|
|
pmk8350_qtm_e_therm {
|
|
reg = <PMK8350_ADC7_AMUX_THM4_100K_PU>;
|
|
label = "pmk8350_qtm_e_therm";
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
};
|
|
};
|
|
|
|
&pmk8350_adc_tm {
|
|
io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>,
|
|
<&pmk8350_vadc PMK8350_ADC7_AMUX_THM2_100K_PU>,
|
|
<&pmk8350_vadc PMK8350_ADC7_AMUX_THM4_100K_PU>;
|
|
|
|
qtm_n__therm {
|
|
reg = <PMK8350_ADC7_AMUX_THM2_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
};
|
|
qtm_e_therm {
|
|
reg = <PMK8350_ADC7_AMUX_THM4_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
};
|
|
};
|
|
|
|
&pmr735a_gpios {
|
|
camera_therm {
|
|
camera_therm_default:camera_therm_default {
|
|
pins = "gpio3";
|
|
bias-high-impedance;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmr735a_vadc {
|
|
status = "ok"
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&camera_therm_default>;
|
|
|
|
pmr735a_camera_therm {
|
|
reg = <ADC7_GPIO3_100K_PU>;
|
|
label = "pmr735a_camera_therm";
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
qcom,pre-scaling = <1 1>;
|
|
};
|
|
};
|
|
|
|
&pmr735a_4{
|
|
pmr735a_adc_tm_iio: adc_tm@3400 {
|
|
compatible = "qcom,adc-tm5-iio";
|
|
reg = <0x3400>;
|
|
#thermal-sensor-cells = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
io-channels = <&pmr735a_vadc ADC7_GPIO3_100K_PU>;
|
|
|
|
pmr735a_camera_therm {
|
|
reg = <ADC7_GPIO3_100K_PU>;
|
|
qcom,ratiometric;
|
|
qcom,hw-settle-time = <200>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qupv3_se7_i2c {
|
|
status = "ok"
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
sec-nfc@27 {
|
|
compatible = "sec-nfc";
|
|
reg = <0x27>;
|
|
sec-nfc,ven-gpio = <&tlmm 48 0x00>;
|
|
sec-nfc,firm-gpio = <&tlmm 135 0x00>;
|
|
sec-nfc,irq-gpio = <&tlmm 9 0x00>;
|
|
sec-nfc,clk_req-gpio = <&tlmm 7 0x00>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <9 0>;
|
|
interrupt-names = "nfc_irq";
|
|
pinctrl-names = "nfc_active", "nfc_suspend";
|
|
pinctrl-0 = <&nfc_int_active &nfc_enable_active
|
|
&nfc_clk_req_active>;
|
|
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
|
|
&nfc_clk_req_suspend>;
|
|
clock-names = "OSC_NFC";
|
|
};
|
|
};
|
|
|
|
&thermal_zones {
|
|
sdm-skin-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
|
|
rear-cam-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
|
|
camera-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
|
|
quiet-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
|
|
pa-therm0-usr {
|
|
status = "disabled";
|
|
};
|
|
|
|
pa-therm1-usr {
|
|
status = "disabled";
|
|
};
|
|
|
|
xo-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
chg-skin-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
msm_therm {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm6125_adc_tm_iio ADC5_GPIO1_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
chg_therm {
|
|
polling-delay-passive = <5000>;
|
|
polling-delay = <20000>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM1_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
cam_flash_therm {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm6125_adc_tm ADC5_GPIO3_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
pa_therm2 {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm6125_adc_tm ADC5_GPIO4_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
pa_therm1 {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm6125_adc_tm ADC5_AMUX_THM1_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
quiet_therm {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm6125_adc_tm ADC5_AMUX_THM2_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
|
|
active-config1 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
xo_therm {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
qtm_n_therm {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM2_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
|
|
qtm_e_therm {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM4_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
soc_usr {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&bcl_soc>;
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
label = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&key_vol_up_default>;
|
|
|
|
vol_up {
|
|
label = "volume_up";
|
|
gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
|
|
ldo_vib {
|
|
compatible = "moto,vibrator-ldo";
|
|
moto,vib-ldo-gpio = <&tlmm 100 0x0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
qcom,tz_gpio {
|
|
compatible = "qcom,tz_gpio";
|
|
tlmm-tz = <0>,
|
|
<13>,
|
|
<14>,
|
|
<15>,
|
|
<16>;
|
|
};
|
|
};
|
|
|
|
/* Primary USB port related QUSB2 PHY */
|
|
&usb2_phy0 {
|
|
qcom,param-override-seq =
|
|
<0xa6 0x6c /* override_x0 */
|
|
0x25 0x70 /* override_x1 */
|
|
0x16 0x74>; /* override x2 */
|
|
};
|
|
|