Suman Tripathi
a3a84bc7c8
ahci_xgene: Implement the workaround to support PMP enumeration and discovery.
...
Due to H/W errata, the controller is unable to save the PMP
field fetched from command header before sending the H2D FIS.
When the device returns the PMP port field in the D2H FIS, there is
a mismatch and results in command completion failure. The workaround
is to write the pmp value to PxFBS.DEV field before issuing any command
to PMP.
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-01-06 08:38:25 -05:00
..
acard-ahci.c
AHCI: Move host activation code into ahci_host_activate()
2014-10-06 11:43:35 -04:00
ahci.c
ahci: disable MSI on SAMSUNG 0xa800 SSD
2014-12-04 13:18:55 -05:00
ahci.h
AHCI: Do not read HOST_IRQ_STAT reg in multi-MSI mode
2014-10-06 11:43:36 -04:00
ahci_da850.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
ahci_imx.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
ahci_mvebu.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
ahci_platform.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
ahci_st.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
ahci_sunxi.c
Driver core patches for 3.19-rc1
2014-12-14 16:10:09 -08:00
ahci_tegra.c
ata: ahci_tegra: Read calibration fuse
2014-08-26 10:48:27 -04:00
ahci_xgene.c
ahci_xgene: Implement the workaround to support PMP enumeration and discovery.
2015-01-06 08:38:25 -05:00
ata_generic.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
ata_piix.c
ata_piix: Add Device IDs for Intel 9 Series PCH
2014-08-28 08:53:40 -04:00
Kconfig
PM / Kconfig: Replace PM_RUNTIME with PM in dependencies
2014-12-13 00:44:04 +01:00
libahci.c
Revert "AHCI: Optimize single IRQ interrupt processing"
2014-10-27 12:02:05 -04:00
libahci_platform.c
AHCI: Move host activation code into ahci_host_activate()
2014-10-06 11:43:35 -04:00
libata-acpi.c
ACPI and power management updates for 3.15-rc1
2014-04-01 12:48:54 -07:00
libata-core.c
libata: Implement ATA_DEV_ZAC
2014-11-05 11:22:06 -05:00
libata-eh.c
libata: export ata_get_cmd_descript()
2015-01-05 11:22:49 -05:00
libata-pmp.c
ata: enable quirk from jmicron JMB350 for JMB394
2014-01-31 07:05:44 -05:00
libata-scsi.c
libata: s/ata_id_removeable()/ata_id_removable()/
2014-12-25 15:27:16 -05:00
libata-sff.c
libata-sff: Fix controllers with no ctl port
2014-09-28 11:19:12 -04:00
libata-transport.c
libata: Implement ATA_DEV_ZAC
2014-11-05 11:22:06 -05:00
libata-transport.h
libata-zpodd.c
libata: zpodd: eliminate odd_can_poweroff
2014-03-14 11:23:47 -04:00
libata.h
scsi: use 64-bit LUNs
2014-07-17 22:07:37 +02:00
Makefile
ata: Add support for the Tegra124 SATA controller
2014-07-18 17:52:33 -04:00
pata_acpi.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ali.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_amd.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_arasan_cf.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_artop.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_at32.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_at91.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_atiixp.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_atp867x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_bf54x.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_cmd64x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cmd640.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5520.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5530.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5535.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cs5536.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_cypress.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_efar.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ep93xx.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_hpt3x2n.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_hpt3x3.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_hpt37x.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_hpt366.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_icside.c
Drivers: ata: remove __dev* attributes.
2013-01-03 15:57:03 -08:00
pata_imx.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_isapnp.c
pata_isapnp: Don't use invalid I/O ports
2013-10-07 15:17:32 -04:00
pata_it821x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_it8213.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_jmicron.c
ata: Disabling the async PM for JMicron chip 363/361
2014-09-01 08:38:06 -04:00
pata_legacy.c
pata_legacy: Remove dead code
2014-03-11 08:30:53 -04:00
pata_macio.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_marvell.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_mpc52xx.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_mpiix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_netcell.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ninja32.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ns87410.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_ns87415.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_octeon_cf.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_of_platform.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_oldpiix.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_opti.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_optidma.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_palmld.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_pcmcia.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
pata_pdc202xx_old.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_pdc2027x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_piccolo.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_platform.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_pxa.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_radisys.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_rb532_cf.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_rdc.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_rz1000.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_samsung_cf.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
pata_sc1200.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_scc.c
pata_scc: propagate return value of scc_wait_after_reset
2014-08-18 09:15:21 -04:00
pata_sch.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_serverworks.c
pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller
2014-10-07 17:10:14 -04:00
pata_sil680.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sis.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_sl82c105.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_triflex.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pata_via.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
pdc_adma.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_dwc_460ex.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
sata_fsl.c
Driver core patches for 3.19-rc1
2014-12-14 16:10:09 -08:00
sata_highbank.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
sata_inic162x.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_mv.c
ata: drop owner assignment from platform_drivers
2014-10-20 16:20:17 +02:00
sata_nv.c
scsi: drop reason argument from ->change_queue_depth
2014-11-24 14:45:27 +01:00
sata_promise.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_promise.h
sata_qstor.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_rcar.c
Driver core patches for 3.19-rc1
2014-12-14 16:10:09 -08:00
sata_sil.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_sil24.c
sata_sil24: Identify which card suffered IRQ status error
2014-07-22 10:08:31 -04:00
sata_sis.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_svw.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_sx4.c
ata: remove superfluous casts
2014-03-26 12:36:53 -04:00
sata_uli.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sata_via.c
ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers
2014-05-09 22:37:49 -04:00
sata_vsc.c
ata: delete non-required instances of include <linux/init.h>
2014-02-13 16:40:56 -05:00
sis.h