No description
  • C 98.2%
  • Assembly 1%
  • Makefile 0.3%
  • Shell 0.2%
  • Python 0.1%
Find a file
Repository files (latest commit first)
Filename Latest commit message Latest commit date
Vincent Guittot be192b51bf UPSTREAM: sched/fair: Prefer prev cpu in asymmetric wakeup path
During fast wakeup path, scheduler always check whether local or prev
cpus are good candidates for the task before looking for other cpus in
the domain. With commit b7a331615d25 ("sched/fair: Add asymmetric CPU
capacity wakeup scan") the heterogenous system gains a dedicated path
but doesn't try to reuse prev cpu whenever possible. If the previous
cpu is idle and belong to the LLC domain, we should check it 1st
before looking for another cpu because it stays one of the best
candidate and this also stabilizes task placement on the system.

This change aligns asymmetric path behavior with symmetric one and reduces
cases where the task migrates across all cpus of the sd_asym_cpucapacity
domains at wakeup.

This change does not impact normal EAS mode but only the overloaded case or
when EAS is not used.

- On hikey960 with performance governor (EAS disable)

./perf bench sched pipe -T -l 50000
             mainline           w/ patch
ops/sec        149313(+/-0.28%)   182587(+/- 0.40) +22%

- On hikey with performance governor

./perf bench sched pipe -T -l 50000
             mainline           w/ patch
ops/sec         47721(+/-0.76%)    47899(+/- 0.56) +0.4%

According to test on hikey, the patch doesn't impact symmetric system
compared to current implementation (only tested on arm64)

Also read the uclamped value of task's utilization at most twice instead
instead each time we compare task's utilization with cpu's capacity.

Fixes: b7a331615d25 ("sched/fair: Add asymmetric CPU capacity wakeup scan")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20201029161824.26389-1-vincent.guittot@linaro.org
(cherry picked from commit b4c9c9f15649c98a5b45408919d1ff4fd7f5531c)
Bug: 187129171
Signed-off-by: Connor O'Brien <connoro@google.com>
Change-Id: Icaba6ae29d5bd23f87ca5492b778869be9e0d9c9
2021-05-03 20:55:31 -07:00
android ANDROID: ABI: add pm_system_cancel_wakeup symbol 2021-04-26 09:39:26 +01:00
arch ANDROID: Add OWNERS files referring to the respective android-mainline OWNERS 2021-04-01 13:45:14 +00:00
block ANDROID: Add OWNERS files referring to the respective android-mainline OWNERS 2021-04-01 13:45:14 +00:00
certs
crypto ANDROID: Add OWNERS files referring to the respective android-mainline OWNERS 2021-04-01 13:45:14 +00:00
Documentation ANDROID: Add OWNERS files referring to the respective android-mainline OWNERS 2021-04-01 13:45:14 +00:00
drivers UPSTREAM: scsi: ufshcd: Fix missing destroy_workqueue() 2021-05-03 20:55:21 -07:00
fs ANDROID: Incremental fs: Set credentials before reading/writing 2021-04-22 22:34:21 +00:00
include ANDROID: Add OWNERS files referring to the respective android-mainline OWNERS 2021-04-01 13:45:14 +00:00
init ANDROID: GKI: Enable DRM_GEM_SHMEM_HELPER 2021-03-20 12:02:49 +00:00
ipc
kernel UPSTREAM: sched/fair: Prefer prev cpu in asymmetric wakeup path 2021-05-03 20:55:31 -07:00
lib This is the 5.4.83 stable release 2020-12-11 15:00:01 +01:00
LICENSES
mm ANDROID: Add OWNERS files referring to the respective android-mainline OWNERS 2021-04-01 13:45:14 +00:00
net UPSTREAM: xfrm/compat: Translate by copying XFRMA_UNSPEC attribute 2021-05-03 20:55:11 -07:00
samples This is the 5.4.86 stable release 2020-12-30 12:31:14 +01:00
scripts This is the 5.4.86 stable release 2020-12-30 12:31:14 +01:00
security This is the 5.4.86 stable release 2020-12-30 12:31:14 +01:00
sound This is the 5.4.86 stable release 2020-12-30 12:31:14 +01:00
tools ANDROID: Add OWNERS files referring to the respective android-mainline OWNERS 2021-04-01 13:45:14 +00:00
usr
virt KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace 2020-12-02 08:49:46 +01:00
.clang-format
.cocciconfig
.get_maintainer.ignore
.gitattributes
.gitignore
.mailmap
build.config.aarch64
build.config.allmodconfig
build.config.allmodconfig.aarch64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-09-25 14:50:31 +08:00
build.config.allmodconfig.arm ANDROID: drop KERNEL_DIR setting in build.config.common 2020-09-25 14:50:31 +08:00
build.config.allmodconfig.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-09-25 14:50:31 +08:00
build.config.arm
build.config.common ANDROID: clang: update to 12.0.5 2021-04-19 19:41:50 +00:00
build.config.db845c ANDROID: db845c: Use FRAGMENT_CONFIG 2021-03-08 19:14:48 +00:00
build.config.gki
build.config.gki-debug.aarch64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-09-25 14:50:31 +08:00
build.config.gki-debug.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-09-25 14:50:31 +08:00
build.config.gki.aarch64 ANDROID: GKI: Add IMX KMI symbol list 2021-03-10 20:18:36 +00:00
build.config.gki.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-09-25 14:50:31 +08:00
build.config.gki_kasan ANDROID: build_config: drop CONFIG_KASAN_PANIC_ON_WARN 2021-02-15 18:29:03 +00:00
build.config.gki_kasan.aarch64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-09-25 14:50:31 +08:00
build.config.gki_kasan.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-09-25 14:50:31 +08:00
build.config.gki_kprobes ANDROID: Adding kprobes build configs for Cuttlefish 2021-02-28 04:50:28 +00:00
build.config.gki_kprobes.aarch64 ANDROID: Adding kprobes build configs for Cuttlefish 2021-02-28 04:50:28 +00:00
build.config.gki_kprobes.x86_64 ANDROID: Adding kprobes build configs for Cuttlefish 2021-02-28 04:50:28 +00:00
build.config.hikey960 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-09-25 14:50:31 +08:00
build.config.x86_64
COPYING
CREDITS
Kbuild
Kconfig UPSTREAM: kbuild: ensure full rebuild when the compiler is updated 2020-09-24 10:02:38 +00:00
MAINTAINERS UPSTREAM: HID: playstation: initial DualSense USB support. 2021-03-12 17:11:35 -08:00
Makefile This is the 5.4.86 stable release 2020-12-30 12:31:14 +01:00
OWNERS ANDROID: Add OWNERS files referring to the respective android-mainline OWNERS 2021-04-01 13:45:14 +00:00
README
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry-picked from ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
    - then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry-picked from c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry-picked from ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry-picked from c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [ Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
    - then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)