Andreas Klinger
ca90f67ece
iio: bmp280: fix compensation of humidity ...
[ Upstream commit dee2dabc0e4115b80945fe2c91603e634f4b4686 ]
Limit the output of humidity compensation to the range between 0 and 100
percent.
Depending on the calibration parameters of the individual sensor it
happens, that a humidity above 100 percent or below 0 percent is
calculated, which don't make sense in terms of relative humidity.
Add a clamp to the compensation formula as described in the datasheet of
the sensor in chapter 4.2.3.
Although this clamp is documented, it was never in the driver of the
kernel.
It depends on the circumstances (calibration parameters, temperature,
humidity) if one can see a value above 100 percent without the clamp.
The writer of this patch was working with this type of sensor without
noting this error. So it seems to be a rare event when this bug occures.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24 17:50:12 +02:00
iio: sca3000: Remove an erroneous 'get_device()'
2020-05-27 17:46:45 +02:00
iio: adc: stm32-adc: fix a wrong error message when probing interrupts
2020-06-10 20:24:56 +02:00
Second set of IIO device support, features, cleanups and minor fixes for 5.3.
2019-07-01 10:58:13 +02:00
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
2019-06-19 17:09:55 +02:00
iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.
2020-06-10 20:24:56 +02:00
iio: st_sensors: rely on odr mask to know if odr can be set
2020-04-29 16:33:12 +02:00
iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()'
2020-05-27 17:46:45 +02:00
spi: docs: convert to ReST and add it to the kABI bookset
2019-07-31 14:13:13 -06:00
iio: frequency: adf4371: Fix output frequency setting
2019-08-05 17:38:33 +01:00
iio: st_gyro: Correct data for LSM9DS0 gyro
2020-02-01 09:34:36 +00:00
iio: humidity: hdc100x: fix IIO_HUMIDITYRELATIVE channel reporting
2019-12-17 19:55:42 +01:00
iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID
2020-01-23 08:22:33 +01:00
iio: vcnl4000: Fix i2c swapped word reading.
2020-06-10 20:24:56 +02:00
iio: magnetometer: ak8974: Fix negative raw values in sysfs
2020-03-25 08:25:53 +01:00
iio: potentiometer: add a driver for Maxim 5432-5435
2019-08-05 14:25:08 +01:00
iio: bmp280: fix compensation of humidity
2020-06-24 17:50:12 +02:00
iio: srf04: fix wrong limitation in distance measuring
2019-10-12 14:31:09 +01:00
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
2019-06-19 17:09:55 +02:00
iio: max31856: add missing of_node and parent references to iio_dev
2019-12-31 16:42:46 +01:00
iio: trigger: stm32-timer: disable master mode when stopping
2020-03-25 08:25:53 +01:00
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
2019-06-19 17:09:55 +02:00
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
2019-06-19 17:09:55 +02:00
iio: buffer: align the size of scan bytes to size of the largest element
2020-01-23 08:22:33 +01:00
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
2019-06-19 17:09:55 +02:00
Staging / IIO driver update for 5.3-rc1
2019-07-11 15:36:02 -07:00
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
2019-06-19 17:09:55 +02:00
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
2019-06-19 17:09:55 +02:00
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
2019-06-19 17:09:55 +02:00
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
2019-06-19 17:09:55 +02:00
Driver Core and debugfs changes for 5.3-rc1
2019-07-12 12:24:03 -07:00
Second set of IIO device support, features, cleanups and minor fixes for 5.3.
2019-07-01 10:58:13 +02:00
ca90f67ece