mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-28 10:41:38 -04:00
2b6394e995
arm/dts: Config thermal zone polling time for ibiza product Change-Id: If3962b3d162b11dfe59d590b55a0fb3444aba7a2 Reviewed-on: https://gerrit.mot.com/1836526 SLTApproved: Slta Waiver SME-Granted: SME Approvals Granted Tested-by: Jira Key Reviewed-by: Yongbin Chen <[email protected]> Reviewed-by: Huosheng Liao <[email protected]> Submit-Approved: Jira Key
425 lines
8.3 KiB
Devicetree
425 lines
8.3 KiB
Devicetree
/* Copyright (c) 2020, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "holi-moto-common-overlay.dtsi"
|
|
#include "ibiza-display.dtsi"
|
|
#include "ibiza-touchscreen.dtsi"
|
|
#include "ibiza-fps-overlay.dtsi"
|
|
#include "camera/holi-camera-sensor-mot-ibiza-overlay.dtsi"
|
|
#include "holi-audio-wcd9370-aw882xx-overlay.dtsi"
|
|
#include "moto_therm_sys_temp.dtsi"
|
|
|
|
&tlmm {
|
|
google_key_default: google_key_default {
|
|
mux {
|
|
pins = "gpio11";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio11";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
nfc {
|
|
nfc_int_active: nfc_int_active {
|
|
/* active state */
|
|
mux {
|
|
/* GPIO 9: NFC Read Interrupt */
|
|
pins = "gpio9";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio9";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
nfc_int_suspend: nfc_int_suspend {
|
|
/* sleep state */
|
|
mux {
|
|
/* GPIO 9: NFC Read Interrupt */
|
|
pins = "gpio9";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio9";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
nfc_enable_active: nfc_enable_active {
|
|
mux {
|
|
/* 48: Enable, 8: Firmware*/
|
|
pins = "gpio48", "gpio8";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio48", "gpio8";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
nfc_enable_suspend: nfc_enable_suspend {
|
|
mux {
|
|
/* 48: Enable, 8: Firmware */
|
|
pins = "gpio48", "gpio8";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio48", "gpio8";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
|
|
nfc_clk_req_active: nfc_clk_req_active {
|
|
/* active state */
|
|
mux {
|
|
/* GPIO 7: NFC CLK Req*/
|
|
pins = "gpio7";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio7";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
nfc_clk_req_suspend: nfc_clk_req_suspend {
|
|
/* sleep state */
|
|
mux {
|
|
/* GPIO 7: NFC CLK Req */
|
|
pins = "gpi7";
|
|
function = "gpio";
|
|
};
|
|
|
|
config {
|
|
pins = "gpio7";
|
|
drive-strength = <2>; /* 2 MA */
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
|
|
&gpio_keys {
|
|
pinctrl-0 = <&key_vol_up_default &google_key_default>;
|
|
|
|
google_key {
|
|
label = "google_key";
|
|
gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_SEARCH>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
|
|
&sdhc_2 {
|
|
status = "ok"
|
|
cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&tlmm {
|
|
cam_pmic_en_default: cam_pmic_en_default {
|
|
mux {
|
|
pins = "gpio38";
|
|
function = "gpio";
|
|
};
|
|
config {
|
|
pins = "gpio38";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qupv3_se10_i2c {
|
|
status = "ok"
|
|
|
|
cam_pmic: wl2864c@29{
|
|
compatible = "semi,wl2864c";
|
|
reg = <0x29>;
|
|
|
|
semi,cs-gpios = <&tlmm 38 0>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cam_pmic_en_default>;
|
|
|
|
vin1-supply = <&S8E>;
|
|
vin2-supply = <&BOB>;
|
|
|
|
regulators {
|
|
cam_ldo1: ldo1 {
|
|
regulator-name = "ldo1";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <3787500>;
|
|
};
|
|
|
|
cam_ldo2: ldo2 {
|
|
regulator-name = "ldo2";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <3787500>;
|
|
};
|
|
|
|
cam_ldo3: ldo3 {
|
|
regulator-name = "ldo3";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <4387500>;
|
|
};
|
|
|
|
cam_ldo4: ldo4 {
|
|
regulator-name = "ldo4";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <4387500>;
|
|
};
|
|
|
|
cam_ldo5: ldo5 {
|
|
regulator-name = "ldo5";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <4387500>;
|
|
};
|
|
|
|
cam_ldo6: ldo6 {
|
|
regulator-name = "ldo6";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <4387500>;
|
|
};
|
|
|
|
cam_ldo7: ldo7 {
|
|
regulator-name = "ldo7";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <4387500>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
&qupv3_se7_i2c {
|
|
status = "ok"
|
|
nq@28 {
|
|
compatible = "qcom,sn-nci";
|
|
reg = <0x28>;
|
|
qcom,sn-irq = <&tlmm 9 0x00>;
|
|
qcom,sn-ven = <&tlmm 48 0x00>;
|
|
qcom,sn-firm = <&tlmm 8 0x00>;
|
|
qcom,sn-clkreq = <&tlmm 7 0x00>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <9 0>;
|
|
interrupt-names = "nfc_irq";
|
|
pinctrl-names = "nfc_active", "nfc_suspend";
|
|
pinctrl-0 = <&nfc_int_active &nfc_enable_active
|
|
&nfc_clk_req_active>;
|
|
pinctrl-1 = <&nfc_int_suspend &nfc_enable_suspend
|
|
&nfc_clk_req_suspend>;
|
|
};
|
|
};
|
|
|
|
&mot_batterydata {
|
|
df-serialnum = "SB18C77591";
|
|
qcom,batt-id-range-pct = <15>;
|
|
#include "qg-batterydata-jk50-swd-5000mah.dtsi"
|
|
#include "qg-batterydata-jk50-sunwoda-5000mah.dtsi"
|
|
#include "qg-batterydata-jk50-atl-5000mah.dtsi"
|
|
};
|
|
|
|
&pm7250b_charger {
|
|
qcom,fcc-max-ua = <3000000>;
|
|
qcom,fv-max-uv = <4400000>;
|
|
qcom,dcp-curr-max = <2000000>;
|
|
qcom,thermal-mitigation = <3000000 2500000
|
|
2000000 1500000
|
|
1200000 900000
|
|
600000 300000>;
|
|
};
|
|
|
|
&pm7250b_mmi {
|
|
qcom,mmi-temp-zones = <0 4200 1000 0>,
|
|
<15 0 1000 1000>,
|
|
<45 0 3000 3000>,
|
|
<60 4200 2500 0>;
|
|
qcom,iterm-ma = <150>;
|
|
};
|
|
|
|
|
|
&pm7250b_qg {
|
|
qcom,qg-iterm-ma = <500>;
|
|
};
|
|
|
|
&thermal_zones {
|
|
pa-therm0-usr {
|
|
status = "disabled";
|
|
};
|
|
sdm-skin-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
pa-therm1-usr {
|
|
status = "disabled";
|
|
};
|
|
quiet-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
rfc-cam-pa3-usr {
|
|
status = "disabled";
|
|
};
|
|
camera-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
chg-skin-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
conn-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
xo-therm-usr {
|
|
status = "disabled";
|
|
};
|
|
pa_therm2 {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm6150l_adc_tm ADC5_AMUX_THM1_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
msm_therm {
|
|
polling-delay-passive = <5000>;
|
|
polling-delay = <20000>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm6150l_adc_tm_iio ADC5_AMUX_THM2_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
pa_therm3 {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm6150l_adc_tm ADC5_AMUX_THM3_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
pa_therm1 {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm6150l_adc_tm ADC5_GPIO3_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
quiet_therm {
|
|
polling-delay-passive = <5000>;
|
|
polling-delay = <20000>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm6150l_adc_tm ADC5_GPIO4_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
chg_therm {
|
|
polling-delay-passive = <5000>;
|
|
polling-delay = <20000>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM1_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
cam_flash_therm {
|
|
polling-delay-passive = <0>;
|
|
polling-delay = <0>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM3_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
xo_therm {
|
|
polling-delay-passive = <5000>;
|
|
polling-delay = <20000>;
|
|
thermal-governor = "user_space";
|
|
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;
|
|
wake-capable-sensor;
|
|
trips {
|
|
active-config0 {
|
|
temperature = <125000>;
|
|
hysteresis = <1000>;
|
|
type = "passive";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pm8008_8 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&pm8008_9 {
|
|
status = "disabled";
|
|
};
|