mirror of
https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git
synced 2026-10-13 00:00:00 -04:00
No description
- C 98.2%
- Assembly 1%
- Makefile 0.3%
- Shell 0.2%
- Python 0.1%
| Filename | Latest commit message | Latest commit date |
|---|---|---|
d2849a5871
R-Car H3 (r8a7795) SoC - Sort i2c and pciec0 nodes within soc node R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs - Remove BUSIF0 settings from rcar_sound,ssi R-Car M3-W (r8a7796) based Salvator-XS board - Convert to new LVDS DT bindings R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards - Use audio-graph-card to allow secondary sound device on kingfisher daugher board - Add HDMI sound support Kingfisher daughterboard for R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards - Add pcm3168 sound codec R-Car E3 (r8a77990) SoC - Enable DMA for SCIF2 R-Car E3 (r8a77990) based Ebisu board - HS400 for onboard eMMC - Use simple-audio-card rather than simple-scu-audio-card - Correct EthernetAVB phy mode as rgmii - Add backlight and follow-up to correct duplicate regulator number R-Car V3M (r8a77970) based v3msk starter kit - Specify EtherAVB PHY IRQ now that GPIO support is present R-Car D3 (r8a77995) based draak board - Set better backlight levels RZ/G2M (r8a774a1) SoC - Correct hsusb reg size RZ/G2E (r8a774c0) SoC - Intial SoC DT - Add: and SYS-DMAC controller, SCIF, HSCIF, INTC-EX PFC, GPIO, Ethernet AVB, watchdog, secondary CA3 core, SDHI, I2C, IIC-DVFS, IPMU, CAN, thermal, MSIOF, audio, PWM, display output, USB2.0, USB-DMAC, HSUSB, USB3.0, IPMMU, PCIe, VIN and CSI-2 support - A follow-up patch included in this pull-request enables DMA for SCIF2 so that DMA is enabled for all SCIF nodes -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlxIKlEACgkQ189kaWo3 T76URw/+LUjkNY2Erik3Q82UJUqgtVcVOaDz831K+5lN2vGNo+5mUdGlE1H97OeY +PG0w0Eg9xjLPB/wyRRBd6436FvdP2tnnJDhQTIuKKV9Ee76XGXJOKuuNH4LymqN XU6iMXDG4CqTPWSOpb6WzxCiWUvUVJAw6SvRETAKngRpVKIUb+4ieJdjVUFI/OuL AEyOBAd59qjHffVmV1MaRrwp1VT4oj2S1zoz/w/625WywxvtYvURkxAlXa93GOqI 3VEGihdrUVMvbN6pjJ1QKe0sVIw1BXzBI2CKfo4AfW1PpnNKNxwIpV45JEiP8N7J UWTObgbjhejUMQBSh1bCk1hEESMp0iB2rkHYlqW8W7xkYpGP925MnRPKBNMNDTux khnKMznJLLU1rbbGUA2dvHtbR9pOHmdzMar3/N3VKSa69qilawkhWg/Kxjx3+CbM N5T7SHl0fwaMxY3TjQf759GzQ5DigJImHwuahI0ORu+Wceh1SdaWeq6kA+ZF9A0E l8ZOxJaZBDctcdpdShJGqBO2VXdXv8dSAhVJQ2Ln7I0gFNY8KffIW1LzrFx5c5Wk 3JVQ57BCuMDUK59h/aKXfMApjgSahoGdsvNPCmyoseiw+2xkPPqM/sXnTXu0AYKS yoVtQ/oumNfBTg8Aaqj1tBezps1XLMNsG04h29iU1rrjka6GG+E= =HPzD -----END PGP SIGNATURE----- Merge tag 'renesas-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM64 Based SoC DT Updates for v5.1 R-Car H3 (r8a7795) SoC - Sort i2c and pciec0 nodes within soc node R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs - Remove BUSIF0 settings from rcar_sound,ssi R-Car M3-W (r8a7796) based Salvator-XS board - Convert to new LVDS DT bindings R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards - Use audio-graph-card to allow secondary sound device on kingfisher daugher board - Add HDMI sound support Kingfisher daughterboard for R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based ULCB boards - Add pcm3168 sound codec R-Car E3 (r8a77990) SoC - Enable DMA for SCIF2 R-Car E3 (r8a77990) based Ebisu board - HS400 for onboard eMMC - Use simple-audio-card rather than simple-scu-audio-card - Correct EthernetAVB phy mode as rgmii - Add backlight and follow-up to correct duplicate regulator number R-Car V3M (r8a77970) based v3msk starter kit - Specify EtherAVB PHY IRQ now that GPIO support is present R-Car D3 (r8a77995) based draak board - Set better backlight levels RZ/G2M (r8a774a1) SoC - Correct hsusb reg size RZ/G2E (r8a774c0) SoC - Intial SoC DT - Add: and SYS-DMAC controller, SCIF, HSCIF, INTC-EX PFC, GPIO, Ethernet AVB, watchdog, secondary CA3 core, SDHI, I2C, IIC-DVFS, IPMU, CAN, thermal, MSIOF, audio, PWM, display output, USB2.0, USB-DMAC, HSUSB, USB3.0, IPMMU, PCIe, VIN and CSI-2 support - A follow-up patch included in this pull-request enables DMA for SCIF2 so that DMA is enabled for all SCIF nodes * tag 'renesas-arm64-dt-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (44 commits) arm64: dts: renesas: r8a77990: ebisu: Enable HS400 of SDHI3 arm64: dts: renesas: r8a77990: Enable DMA for SCIF2 arm64: dts: renesas: r8a774c0: Enable DMA for SCIF2 arm64: dts: renesas: r8a77990: ebisu: Fix backlight regulator numbering arm64: dts: renesas: v3msk: specify EtherAVB PHY IRQ arm64: dts: renesas: r8a77990-ebisu: use simple-audio-card arm64: dts: renesas: r8a7796: remove BUSIF0 settings from rcar_sound,ssi arm64: dts: renesas: r8a7795: remove BUSIF0 settings from rcar_sound,ssi arm64: dts: renesas: ulcb-kf: add pcm3168 sound codec arm64: dts: renesas: ulcb: add HDMI sound support arm64: dts: renesas: ulcb: use audio-graph-card arm64: dts: renesas: r8a7796: salvator-xs: Convert to new LVDS DT bindings arm64: dts: renesas: r8a77990: Sort i2c nodes within soc node arm64: dts: renesas: r8a77990: sort pciec0 node within soc node arm64: dts: renesas: r8a774a1: Fix hsusb reg size arm64: dts: renesas: r8a774c0: Add VIN and CSI-2 device nodes arm64: dts: renesas: r8a774c0: Add PCIe device node arm64: dts: renesas: r8a774c0: Connect RZ/G2E Audio-DMAC to IPMMU arm64: dts: renesas: r8a774c0: Connect RZ/G2E AVB to IPMMU arm64: dts: renesas: r8a774c0: Connect RZ/G2E SYS-DMAC to IPMMU ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| Documentation | ||
| drivers | ||
| firmware | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| LICENSES | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.