João Paulo Rechi Vita
df2445bf77
Bluetooth: Add a new 13d3:3496 QCA_ROME device
Without this patch we can't establish a SCO connection with this
adapter.
This adapter is named "IMC Networks" under lsusb.
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3496 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
2018-05-18 06:37:52 +02:00 |
| .. |
|
ath3k.c
|
Bluetooth: ath3k: fix checkpatch warning
|
2018-02-07 09:46:09 +01:00 |
|
bcm203x.c
|
Bluetooth: mark expected switch fall-throughs
|
2017-10-14 09:25:51 +02:00 |
|
bfusb.c
|
|
|
|
bluecard_cs.c
|
Bluetooth: Fix a possible sleep-in-atomic bug in bluecard_write_wakeup
|
2017-12-13 14:38:59 +01:00 |
|
bpa10x.c
|
Bluetooth: bpa10x: Use separate h4_recv_buf helper
|
2018-04-01 14:25:32 +02:00 |
|
bt3c_cs.c
|
Bluetooth: Use bt_dev_err and bt_dev_info when possible
|
2017-10-30 12:25:45 +02:00 |
|
btbcm.c
|
Bluetooth: btbcm: btbcm_initialize(): Initialize hw_name to "BCM"
|
2018-05-18 06:37:51 +02:00 |
|
btbcm.h
|
Bluetooth: btbcm: Allow using btbcm_initialize() for reinit
|
2018-05-18 06:37:51 +02:00 |
|
btintel.c
|
Bluetooth: btintel: Create common function for firmware download
|
2018-01-25 09:28:40 +01:00 |
|
btintel.h
|
Bluetooth: btintel: Create common function for firmware download
|
2018-01-25 09:28:40 +01:00 |
|
btmrvl_debugfs.c
|
|
|
|
btmrvl_drv.h
|
|
|
|
btmrvl_main.c
|
Bluetooth: btmrvl_main: Replace GFP_ATOMIC with GFP_KERNEL in btmrvl_send_sync_cmd
|
2018-02-07 09:48:56 +01:00 |
|
btmrvl_sdio.c
|
Bluetooth: btmrvl: Delete an unnecessary variable initialisation in btmrvl_sdio_card_to_host()
|
2018-04-01 14:25:31 +02:00 |
|
btmrvl_sdio.h
|
|
|
|
btqca.c
|
Bluetooth: btqca: Add AR3002 rampatch support
|
2018-05-18 06:37:52 +02:00 |
|
btqca.h
|
Bluetooth: btqca: Add AR3002 rampatch support
|
2018-05-18 06:37:52 +02:00 |
|
btqcomsmd.c
|
Bluetooth: btqcomsmd: Fix rx/tx stats
|
2018-05-18 06:37:50 +02:00 |
|
btrsi.c
|
Bluetooth: btrsi: remove unused including <linux/version.h>
|
2018-04-01 21:43:02 +03:00 |
|
btrtl.c
|
Bluetooth: btrtl: Add RTL8723D and RTL8821C devices
|
2018-02-11 21:50:35 +01:00 |
|
btrtl.h
|
|
|
|
btsdio.c
|
Bluetooth: btsdio: Do not bind to non-removable BCM43341
|
2017-12-13 00:28:41 +01:00 |
|
btusb.c
|
Bluetooth: Add a new 13d3:3496 QCA_ROME device
|
2018-05-18 06:37:52 +02:00 |
|
btwilink.c
|
|
|
|
dtl1_cs.c
|
|
|
|
h4_recv.h
|
Bluetooth: bpa10x: Use separate h4_recv_buf helper
|
2018-04-01 14:25:32 +02:00 |
|
hci_ag6xx.c
|
|
|
|
hci_ath.c
|
Bluetooth: hci_ath: Replace mdelay with msleep in ath_wakeup_ar3k
|
2018-02-07 09:47:04 +01:00 |
|
hci_bcm.c
|
Bluetooth: btbcm: Allow using btbcm_initialize() for reinit
|
2018-05-18 06:37:51 +02:00 |
|
hci_bcsp.c
|
|
|
|
hci_h4.c
|
Bluetooth: Use bt_dev_err and bt_dev_info when possible
|
2017-10-30 12:25:45 +02:00 |
|
hci_h5.c
|
|
|
|
hci_intel.c
|
Bluetooth: btintel: Create common function for firmware download
|
2018-01-25 09:28:40 +01:00 |
|
hci_ldisc.c
|
Bluetooth: hci_ldisc: Provide a 'default' switch case
|
2018-05-18 06:37:52 +02:00 |
|
hci_ll.c
|
Bluetooth: hci_ll: Convert to use h4_recv_buf helper
|
2018-04-01 14:25:32 +02:00 |
|
hci_mrvl.c
|
|
|
|
hci_nokia.c
|
|
|
|
hci_qca.c
|
Bluetooth: hci_qca: Add serdev support
|
2018-05-18 06:37:51 +02:00 |
|
hci_serdev.c
|
Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops
|
2017-12-13 00:28:41 +01:00 |
|
hci_uart.h
|
Bluetooth: hci_ldisc: Allow sleeping while proto locks are held.
|
2017-10-29 14:03:28 +01:00 |
|
hci_vhci.c
|
vfs: do bulk POLL* -> EPOLL* replacement
|
2018-02-11 14:34:03 -08:00 |
|
Kconfig
|
Bluetooth: hci_qca: Add serdev support
|
2018-05-18 06:37:51 +02:00 |
|
Makefile
|
Bluetooth: Remove unused btuart_cs driver
|
2018-04-01 14:25:32 +02:00 |