sm8250-common: Import WiFi configs
Change-Id: I9fdc4472ba2b4be1025e65f6574dca96282de40a
This commit is contained in:
LuK1337
parent
19ff917fb1
commit
5eb5e3ffd8
7 changed files with 2151 additions and 0 deletions
|
|
@ -311,6 +311,14 @@ PRODUCT_PACKAGES += \
|
|||
PRODUCT_PACKAGES += \
|
||||
WifiResCommon
|
||||
|
||||
PRODUCT_COPY_FILES += \
|
||||
$(LOCAL_PATH)/wifi/qca6390/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/qca6390/WCNSS_qcom_cfg.ini \
|
||||
$(LOCAL_PATH)/wifi/qca6390/WCNSS_qcom_cfg_cta_kona_8.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/qca6390/WCNSS_qcom_cfg_cta_kona_8.ini \
|
||||
$(LOCAL_PATH)/wifi/WCNSS_qcom_cfg_roam.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg_roam.ini \
|
||||
$(LOCAL_PATH)/wifi/WCNSS_qcom_cfg_setchain.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg_setchain.ini \
|
||||
$(LOCAL_PATH)/wifi/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \
|
||||
$(LOCAL_PATH)/wifi/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf
|
||||
|
||||
# WiFi Display
|
||||
PRODUCT_PACKAGES += \
|
||||
libnl
|
||||
|
|
|
|||
447
wifi/WCNSS_qcom_cfg_roam.ini
Normal file
447
wifi/WCNSS_qcom_cfg_roam.ini
Normal file
|
|
@ -0,0 +1,447 @@
|
|||
# This file allows user to override the factory
|
||||
# for close wifi roam
|
||||
gEnableImps = 0
|
||||
gEnableBmps = 0
|
||||
gRoamOffloadEnabled=0
|
||||
gRoamScanOffloadEnabled=0
|
||||
#Below ini copied from LA.UM.0.6.3
|
||||
fw_timeout_crash=1
|
||||
|
||||
# Phy Mode (auto, b, g, n, etc)
|
||||
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
||||
# 7 = 11b only 8 = 11ac only.
|
||||
gDot11Mode=0
|
||||
|
||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
||||
InfraUapsdVoSrvIntv=0
|
||||
InfraUapsdViSrvIntv=0
|
||||
InfraUapsdBeSrvIntv=0
|
||||
InfraUapsdBkSrvIntv=0
|
||||
|
||||
# Flag to allow STA send AddTspec even when ACM is Off
|
||||
gAddTSWhenACMIsOff=1
|
||||
|
||||
# 802.11n Protection flag
|
||||
gEnableApProt=1
|
||||
|
||||
#Enable OBSS protection
|
||||
gEnableApOBSSProt=1
|
||||
|
||||
#Enable/Disable UAPSD for SoftAP
|
||||
gEnableApUapsd=1
|
||||
|
||||
# Maximum Tx power
|
||||
# gTxPowerCap=30
|
||||
|
||||
# Fragmentation Threshold
|
||||
# gFragmentationThreshold=2346
|
||||
|
||||
# RTS threshold
|
||||
RTSThreshold=1048576
|
||||
|
||||
# Intra-BSS forward
|
||||
gDisableIntraBssFwd=0
|
||||
|
||||
# WMM Enable/Disable
|
||||
WmmIsEnabled=0
|
||||
|
||||
# 802.11d support
|
||||
g11dSupportEnabled=0
|
||||
|
||||
# 802.11h support
|
||||
g11hSupportEnabled=1
|
||||
|
||||
# DFS Master Capability
|
||||
gEnableDFSMasterCap=1
|
||||
|
||||
# ESE Support and fast transition
|
||||
EseEnabled=0
|
||||
|
||||
ImplicitQosIsEnabled=0
|
||||
|
||||
gNeighborScanTimerPeriod=200
|
||||
gNeighborLookupThreshold=76
|
||||
gNeighborScanChannelMinTime=20
|
||||
|
||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
||||
# To enable, set FastRoamEnabled=1
|
||||
# To disable, set FastRoamEnabled=0
|
||||
FastRoamEnabled=1
|
||||
|
||||
# Check if the AP to which we are roaming is better than current AP in
|
||||
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
|
||||
# use this value as to how better the RSSI of the new/roamable AP should
|
||||
# be for roaming
|
||||
RoamRssiDiff=5
|
||||
|
||||
# To enable, set gRoamIntraBand=1 (Roaming within band)
|
||||
# To disable, set gRoamIntraBand=0 (Roaming across band)
|
||||
gRoamIntraBand=0
|
||||
|
||||
#Short Guard Interval Enable/disable
|
||||
gShortGI20Mhz=1
|
||||
gShortGI40Mhz=1
|
||||
|
||||
#Preferred band (both or 2.4 only or 5 only)
|
||||
BandCapability=0
|
||||
|
||||
#Channel Bonding
|
||||
gChannelBondingMode5GHz=1
|
||||
|
||||
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
||||
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
||||
#is idle for last 10 seconds.) For both active and power save clients.
|
||||
|
||||
#Power save clients: DUT set TIM bit from 10th second onwards and till client
|
||||
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
|
||||
|
||||
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
|
||||
#success still we try on 11th second if not tries on 12th and so on till 15th
|
||||
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
|
||||
#case DUT will detect client got removed in (10+5) seconds.
|
||||
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
||||
|
||||
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
|
||||
#it is period where we send NULL frame.
|
||||
#gApLinkMonitorPeriod = 10
|
||||
#gGoLinkMonitorPeriod = 10
|
||||
|
||||
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#are succeed to send or not. Hence total effective detection time is
|
||||
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
|
||||
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
gGoKeepAlivePeriod = 20
|
||||
|
||||
#If set to 0, will not scan DFS channels
|
||||
gEnableDFSChnlScan=1
|
||||
|
||||
# Enable DFS channel roam
|
||||
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
||||
gAllowDFSChannelRoam=1
|
||||
|
||||
gVhtChannelWidth=2
|
||||
|
||||
# Set txchainmask and rxchainmask
|
||||
# These parameters are used only if gEnable2x2 is 0
|
||||
# Valid values are 1,2
|
||||
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
||||
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
||||
gSetTxChainmask1x1=1
|
||||
gSetRxChainmask1x1=1
|
||||
|
||||
# Scan Timing Parameters
|
||||
# gPassiveMaxChannelTime=110
|
||||
gActiveMaxChannelTime=40
|
||||
|
||||
#If set to 0, MCC is not allowed.
|
||||
gEnableMCCMode=1
|
||||
|
||||
# MCC to SCC Switch mode:
|
||||
# 0-Disable
|
||||
# 1-Enable
|
||||
# 2-Force SCC if same band, with SAP restart
|
||||
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
||||
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
||||
# without SAP restart by sending (E)CSA
|
||||
gWlanMccToSccSwitchMode = 3
|
||||
|
||||
# 1=enable STBC; 0=disable STBC
|
||||
gEnableRXSTBC=1
|
||||
|
||||
# 1=enable tx STBC; 0=disable
|
||||
gEnableTXSTBC=1
|
||||
|
||||
# 1=enable rx LDPC; 0=disable
|
||||
gEnableRXLDPC=1
|
||||
|
||||
#Enable/Disable Tx beamforming
|
||||
gTxBFEnable=1
|
||||
|
||||
#Enable/Disable Tx beamformee in SAP mode
|
||||
gEnableTxBFeeSAP=1
|
||||
|
||||
# Enable Tx beamforming in VHT20MHz
|
||||
# Valid values are 0,1. If commented out, the default value is 0.
|
||||
# 0=disable, 1=enable
|
||||
gEnableTxBFin20MHz=1
|
||||
|
||||
#Enable/Disable SU Tx beamformer support
|
||||
gEnableTxSUBeamformer=0
|
||||
|
||||
gEnableFastRoamInConcurrency=1
|
||||
|
||||
# 802.11K support
|
||||
gRrmEnable=1
|
||||
|
||||
# Firmware log mode
|
||||
# Valid values are 0,1,2
|
||||
# 0=Disable, 1=WMI, 2=DIAG
|
||||
gEnablefwlog=1
|
||||
|
||||
# Maximum Receive AMPDU size (VHT only. Valid values:
|
||||
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
||||
gVhtAmpduLenExponent=7
|
||||
|
||||
# Maximum MPDU length (VHT only. Valid values:
|
||||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
||||
gVhtMpduLen=2
|
||||
|
||||
# WOW Enable/Disable.
|
||||
# 0 - Disable both magic pattern match and pattern byte match.
|
||||
# 1 - Enable magic pattern match on all interfaces.
|
||||
# 2 - Enable pattern byte match on all interfaces.
|
||||
# 3 - Enable both magic pattern and pattern byte match on all interfaces.
|
||||
# Default value of gEnableWoW is 3.
|
||||
# gEnableWoW=0
|
||||
|
||||
# Enable or Disable MCC Adaptive Scheduler at the FW
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMCCAdaptiveScheduler=1
|
||||
|
||||
#Enable or Disable p2p device address administered
|
||||
isP2pDeviceAddrAdministrated=0
|
||||
|
||||
# Set Thermal Power limit
|
||||
TxPower2g=10
|
||||
TxPower5g=10
|
||||
|
||||
# Remove Overlap channel restriction
|
||||
gEnableOverLapCh=0
|
||||
|
||||
#Enable VHT on 2.4Ghz
|
||||
gEnableVhtFor24GHzBand=1
|
||||
|
||||
#Maximum number of offload peers supported
|
||||
# gMaxOffloadPeers=2
|
||||
|
||||
# controlling the following offload patterns
|
||||
# through ini parameter. Default value is 1
|
||||
# to disable set it to zero. ssdp = 0
|
||||
# Setup multicast pattern for mDNS 224.0.0.251,
|
||||
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
||||
ssdp=0
|
||||
|
||||
#Enable Memory Deep Sleep
|
||||
gEnableMemDeepSleep=1
|
||||
|
||||
# RA filtering rate limit param, the current value would not
|
||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
||||
# we need to change it, though it is uncommon.
|
||||
# gRAFilterEnable=0
|
||||
gRArateLimitInterval=600
|
||||
|
||||
# Maximum number of concurrent connections
|
||||
gMaxConcurrentActiveSessions=3
|
||||
|
||||
# Disable/Enable GreenAP
|
||||
# 0 to disable, 1 to enable, default: 1
|
||||
gEnableGreenAp=0
|
||||
|
||||
gPNOScanSupport=1
|
||||
|
||||
#Enable/Disable LPASS support
|
||||
# 0 to disable, 1 to enable
|
||||
gEnableLpassSupport=1
|
||||
|
||||
# Whether userspace country code setting shld have priority
|
||||
gCountryCodePriority=1
|
||||
|
||||
# Enable(1)/Disable(0) SIFS burst
|
||||
gEnableSifsBurst=1
|
||||
|
||||
# Enable or Disable Multi-user MIMO
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMuBformee=1
|
||||
|
||||
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
||||
gIbssTxSpEndInactivityTime=10
|
||||
|
||||
# Enable support for TDLS
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSSupport=1
|
||||
|
||||
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
||||
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
||||
# and RSSI) is met and then will initiate teardown when teardown criteria
|
||||
# (idle packet count and RSSI) is met.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSImplicitTrigger=1
|
||||
|
||||
# Enable TDLS External Control. That is, user space application has to
|
||||
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
||||
# Device will establish TDLS only towards those configured peers whenever
|
||||
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
||||
# when teardown criteria (idle packet count and RSSI) is met. However,
|
||||
# device will accept TDLS connection if it is initiated from any other peer,
|
||||
# even if that peer is not configured.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# For TDLS External Control, Implicit Trigger must also be enabled.
|
||||
gTDLSExternalControl=1
|
||||
|
||||
# Enable support for TDLS off-channel operation
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# TDLS off-channel operation will be invoked when there is only one
|
||||
# TDLS connection.
|
||||
gEnableTDLSOffChannel=1
|
||||
|
||||
# Enable or Disable Random MAC (Spoofing)
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMacAddrSpoof=1
|
||||
|
||||
################ Datapath feature set Begin ################
|
||||
# Bus bandwidth threshold values in terms of number of packets
|
||||
gBusBandwidthHighThreshold=2000
|
||||
gBusBandwidthMediumThreshold=500
|
||||
gBusBandwidthLowThreshold=150
|
||||
|
||||
# Bus bandwidth compute timeout value in ms
|
||||
gBusBandwidthComputeInterval=100
|
||||
|
||||
# VHT Tx/Rx MCS values
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gVhtRxMCS=2
|
||||
gVhtTxMCS=2
|
||||
|
||||
# VHT Tx/Rx MCS values for 2x2
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gEnable2x2=1
|
||||
gVhtRxMCS2x2=2
|
||||
gVhtTxMCS2x2=2
|
||||
|
||||
#IPA config is a bit mask and following are the configurations.
|
||||
#bit0 IPA Enable
|
||||
#bit1 IPA PRE Filter enable
|
||||
#bit2 IPv6 enable
|
||||
#bit3 IPA Resource Manager (RM) enable
|
||||
#bit4 IPA Clock scaling enable
|
||||
#bit5 IPA uC ENABLE
|
||||
#bit6 IPA uC STA ENABLE
|
||||
#bit8 IPA Real Time Debugging
|
||||
gIPAConfig=0x7d
|
||||
gIPADescSize=800
|
||||
|
||||
# Enable/Disable RX full reorder offload
|
||||
gReorderOffloadSupported=1
|
||||
|
||||
# Enable CE classification
|
||||
# 1 - enable(default) 0 - disable
|
||||
gCEClassifyEnable=1
|
||||
|
||||
# Enable Rx handling options
|
||||
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
|
||||
# DP_RX_THREAD=16 (1 << 4)
|
||||
# 20 = (DP_RX_THREAD | NAPI)
|
||||
rx_mode=20
|
||||
|
||||
# Enable(Tx) fastpath for data traffic.
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableFastPath=1
|
||||
|
||||
# This flag enables IP, TCP and UDP checksum offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableIpTcpUdpChecksumOffload=1
|
||||
|
||||
# Enable TCP Segmentation Offload
|
||||
# 1 - enable 0 - disable
|
||||
TSOEnable=1
|
||||
|
||||
# Enable Generic Receive Offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
GROEnable=1
|
||||
|
||||
# Enable HT MPDU Density
|
||||
# 4 for 2 micro sec
|
||||
ght_mpdu_density=4
|
||||
|
||||
# Enable flow steering to enable multiple CEs for Rx flows.
|
||||
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
||||
# Parallel Rx paths.
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableFlowSteering=1
|
||||
|
||||
# Time in microseconds after which a NAPI poll must yield
|
||||
ce_service_max_yield_time=500
|
||||
|
||||
#Maximum number of HTT messages to be processed per NAPI poll
|
||||
ce_service_max_rx_ind_flush=1
|
||||
|
||||
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
||||
maxMSDUsPerRxInd=8
|
||||
|
||||
# Enable NUD tracking feature
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNUDTracking=1
|
||||
################ Datapath feature set End ################
|
||||
|
||||
################ NAN feature set start ###################
|
||||
|
||||
# Enable NAN discovery (NAN 1.0)
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNanSupport=1
|
||||
# Enable NAN Datapath
|
||||
genable_nan_datapath=1
|
||||
|
||||
################ NAN feature set end #####################
|
||||
|
||||
adaptive_dwell_mode_enabled=1
|
||||
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
|
||||
adapt_dwell_lpf_weight=80
|
||||
|
||||
adapt_dwell_wifi_act_threshold=10
|
||||
|
||||
MAWCEnabled=0
|
||||
|
||||
drop_bcn_on_chan_mismatch=0
|
||||
|
||||
# Enable/Disable rtt sta mac randomization
|
||||
enable_rtt_mac_randomization=1
|
||||
|
||||
#Enable/Disable SNR monitoring
|
||||
gEnableSNRMonitoring=1
|
||||
|
||||
# HTC Credit count for WMI operation
|
||||
# 1 to serialize the WMI commands
|
||||
# 0 default works with FW advertised credits, 2 credits usually
|
||||
gWmiCreditCount=1
|
||||
|
||||
# Enable enhanced ACS
|
||||
acs_with_more_param=1
|
||||
# bits 0-3: rssi weight
|
||||
# bits 4-7: bss count weight
|
||||
# bits 8-11: noise floor weight
|
||||
# bits 12-15: channel free weight
|
||||
# bits 16-19: tx power range weight
|
||||
# bits 20-23: tx power throughput weight
|
||||
# bits 24-31: reserved
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
|
||||
# Enable/Disable broadcast TWT
|
||||
bcast_twt=1
|
||||
|
||||
# Enable Runtime PM
|
||||
#gRuntimePM=1
|
||||
|
||||
# Enable broadcast logging to the userspace entities
|
||||
gMulticastHostFwMsgs=1
|
||||
# Disable packetlog explicitly
|
||||
gEnablePacketLog=0
|
||||
|
||||
# Set IPA bandwidth levels in mbps
|
||||
gIPALowBandwidthMbps=100
|
||||
gIPAMediumBandwidthMbps=400
|
||||
gIPAHighBandwidthMbps=800
|
||||
spectral_disable=1
|
||||
|
||||
END
|
||||
|
||||
# Note: Configuration parser would not read anything past the END marker
|
||||
|
||||
554
wifi/WCNSS_qcom_cfg_setchain.ini
Normal file
554
wifi/WCNSS_qcom_cfg_setchain.ini
Normal file
|
|
@ -0,0 +1,554 @@
|
|||
# This file allows user to override the factory
|
||||
# for the WLAN chain0/chain1 only
|
||||
|
||||
#Below ini copied from LA.UM.0.6.3
|
||||
# ifdef VENDOR_EDIT
|
||||
tx_nss_5g=0x01249249
|
||||
rx_nss_5g=0x01249249
|
||||
tx_nss_2g=0x01249249
|
||||
rx_nss_2g=0x01249249
|
||||
gInitialScanNoDFSChnl=1
|
||||
gRoamOffloadEnabled=0
|
||||
gRoamScanOffloadEnabled=0
|
||||
#gInitialDwellTime=20
|
||||
gSoftApMaxPeers=8
|
||||
gRoamBmissFirstBcnt=15
|
||||
gRoamBmissFinalBcnt=25
|
||||
gDroppedPktDisconnectTh=1024
|
||||
# Runtime is default zero in hostdriver
|
||||
#gRuntimePM=0
|
||||
gRAFilterEnable=0
|
||||
gMCAddrListEnable=1
|
||||
# 0: disable feature (default)
|
||||
# 1: drop all broadcast frames, except ARP
|
||||
# 2: drop all multicast frames, except ICMPv6
|
||||
# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
|
||||
gHwFilterMode=3
|
||||
gBpfFilterEnable=1
|
||||
#gFwDebugLogLevel=3
|
||||
#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
|
||||
gChannelBondingMode24GHz=1
|
||||
gStaKeepAlivePeriod=30
|
||||
gper_roam_enabled=3
|
||||
gper_roam_th_percent=80
|
||||
gper_min_rssi_threshold_for_roam=70
|
||||
gItoRepeatCount=5
|
||||
gDisablePacketFilter=0
|
||||
g_enable_packet_filter_bitmap=3
|
||||
gEnableModulatedDTIM=3
|
||||
gMaxLIModulatedDTIM=6
|
||||
#gActiveModeOffload=0
|
||||
gReportMaxLinkSpeed=2
|
||||
gEnableSelfRecovery=0
|
||||
gEnableTxSUBeamformer=0
|
||||
# endif /* VENDOR_EDIT */
|
||||
fw_timeout_crash=1
|
||||
|
||||
# Phy Mode (auto, b, g, n, etc)
|
||||
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
||||
# 7 = 11b only 8 = 11ac only.
|
||||
gDot11Mode=0
|
||||
|
||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
||||
InfraUapsdVoSrvIntv=0
|
||||
InfraUapsdViSrvIntv=0
|
||||
InfraUapsdBeSrvIntv=0
|
||||
InfraUapsdBkSrvIntv=0
|
||||
|
||||
# Flag to allow STA send AddTspec even when ACM is Off
|
||||
gAddTSWhenACMIsOff=1
|
||||
|
||||
# ifdef VENDOR_EDIT
|
||||
# Enable IMPS or not
|
||||
gEnableImps=0
|
||||
|
||||
# Enable BMPS or not
|
||||
gEnableBmps=0
|
||||
|
||||
#Flag to enable HostARPOffload feature or not
|
||||
hostArpOffload=1
|
||||
|
||||
#Flag to enable HostNSOffload feature or not
|
||||
hostNSOffload=1
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# 802.11n Protection flag
|
||||
gEnableApProt=1
|
||||
|
||||
#Enable OBSS protection
|
||||
gEnableApOBSSProt=1
|
||||
|
||||
#Enable/Disable UAPSD for SoftAP
|
||||
gEnableApUapsd=1
|
||||
|
||||
# Maximum Tx power
|
||||
# gTxPowerCap=30
|
||||
|
||||
# Fragmentation Threshold
|
||||
# gFragmentationThreshold=2346
|
||||
|
||||
# RTS threshold
|
||||
RTSThreshold=1048576
|
||||
|
||||
# Intra-BSS forward
|
||||
gDisableIntraBssFwd=0
|
||||
|
||||
# WMM Enable/Disable
|
||||
WmmIsEnabled=0
|
||||
|
||||
# 802.11d support
|
||||
#ifdef VENDOR_EDIT
|
||||
g11dSupportEnabled=1
|
||||
#else
|
||||
#g11dSupportEnabled=0
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# 802.11h support
|
||||
g11hSupportEnabled=1
|
||||
|
||||
# DFS Master Capability
|
||||
#ifdef VENDOR_EDIT
|
||||
gEnableDFSMasterCap=0
|
||||
#else
|
||||
#gEnableDFSMasterCap=1
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# ESE Support and fast transition
|
||||
EseEnabled=0
|
||||
|
||||
ImplicitQosIsEnabled=0
|
||||
|
||||
gNeighborScanTimerPeriod=200
|
||||
gNeighborLookupThreshold=76
|
||||
gNeighborScanChannelMinTime=20
|
||||
|
||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
||||
# To enable, set FastRoamEnabled=1
|
||||
# To disable, set FastRoamEnabled=0
|
||||
FastRoamEnabled=1
|
||||
|
||||
# Check if the AP to which we are roaming is better than current AP in
|
||||
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
|
||||
# use this value as to how better the RSSI of the new/roamable AP should
|
||||
# be for roaming
|
||||
RoamRssiDiff=5
|
||||
|
||||
# To enable, set gRoamIntraBand=1 (Roaming within band)
|
||||
# To disable, set gRoamIntraBand=0 (Roaming across band)
|
||||
gRoamIntraBand=0
|
||||
|
||||
#Short Guard Interval Enable/disable
|
||||
gShortGI20Mhz=1
|
||||
gShortGI40Mhz=1
|
||||
|
||||
#Preferred band (both or 2.4 only or 5 only)
|
||||
BandCapability=0
|
||||
|
||||
#Channel Bonding
|
||||
gChannelBondingMode5GHz=1
|
||||
|
||||
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
||||
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
||||
#is idle for last 10 seconds.) For both active and power save clients.
|
||||
|
||||
#Power save clients: DUT set TIM bit from 10th second onwards and till client
|
||||
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
|
||||
|
||||
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
|
||||
#success still we try on 11th second if not tries on 12th and so on till 15th
|
||||
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
|
||||
#case DUT will detect client got removed in (10+5) seconds.
|
||||
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
||||
|
||||
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
|
||||
#it is period where we send NULL frame.
|
||||
#gApLinkMonitorPeriod = 10
|
||||
#gGoLinkMonitorPeriod = 10
|
||||
|
||||
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#are succeed to send or not. Hence total effective detection time is
|
||||
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
|
||||
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
gGoKeepAlivePeriod = 20
|
||||
#ifdef VENDOR_EDIT
|
||||
gApKeepAlivePeriod = 20
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
#If set to 0, will not scan DFS channels
|
||||
gEnableDFSChnlScan=1
|
||||
|
||||
# Enable DFS channel roam
|
||||
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
||||
gAllowDFSChannelRoam=1
|
||||
|
||||
gVhtChannelWidth=2
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
#Data Inactivity Timeout when in powersave (in ms)
|
||||
gDataInactivityTimeout=200
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# Set txchainmask and rxchainmask
|
||||
# These parameters are used only if gEnable2x2 is 0
|
||||
# Valid values are 1,2
|
||||
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
||||
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
||||
gSetTxChainmask1x1=1
|
||||
gSetRxChainmask1x1=1
|
||||
|
||||
# Scan Timing Parameters
|
||||
# gPassiveMaxChannelTime=110
|
||||
#ifdef VENDOR_EDIT
|
||||
gActiveMaxChannelTime=60
|
||||
gActiveMinChannelTime=40
|
||||
#else
|
||||
#gActiveMaxChannelTime=40
|
||||
#gActiveMinChannelTime=20
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
#If set to 0, MCC is not allowed.
|
||||
gEnableMCCMode=1
|
||||
|
||||
# MCC to SCC Switch mode:
|
||||
# 0-Disable
|
||||
# 1-Enable
|
||||
# 2-Force SCC if same band, with SAP restart
|
||||
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
||||
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
||||
# without SAP restart by sending (E)CSA
|
||||
gWlanMccToSccSwitchMode = 3
|
||||
|
||||
# 1=enable STBC; 0=disable STBC
|
||||
gEnableRXSTBC=1
|
||||
|
||||
# 1=enable tx STBC; 0=disable
|
||||
gEnableTXSTBC=1
|
||||
|
||||
# 1=enable rx LDPC; 0=disable
|
||||
gEnableRXLDPC=1
|
||||
|
||||
#Enable/Disable Tx beamforming
|
||||
gTxBFEnable=1
|
||||
|
||||
#Enable/Disable Tx beamformee in SAP mode
|
||||
gEnableTxBFeeSAP=1
|
||||
|
||||
# Enable Tx beamforming in VHT20MHz
|
||||
# Valid values are 0,1. If commented out, the default value is 0.
|
||||
# 0=disable, 1=enable
|
||||
gEnableTxBFin20MHz=1
|
||||
|
||||
#Enable/Disable SU Tx beamformer support
|
||||
#gEnableTxSUBeamformer=1
|
||||
|
||||
gEnableFastRoamInConcurrency=1
|
||||
|
||||
# 802.11K support
|
||||
gRrmEnable=1
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
#Enable Power Save offload
|
||||
gEnablePowerSaveOffload=1
|
||||
#else
|
||||
#gEnablePowerSaveOffload=2
|
||||
|
||||
#Enable firmware uart print
|
||||
gEnablefwprint=0
|
||||
#endif VENDOR_EDIT
|
||||
|
||||
# Firmware log mode
|
||||
# Valid values are 0,1,2
|
||||
# 0=Disable, 1=WMI, 2=DIAG
|
||||
gEnablefwlog=1
|
||||
|
||||
# Maximum Receive AMPDU size (VHT only. Valid values:
|
||||
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
||||
gVhtAmpduLenExponent=7
|
||||
|
||||
# Maximum MPDU length (VHT only. Valid values:
|
||||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
||||
gVhtMpduLen=2
|
||||
|
||||
# WOW Enable/Disable.
|
||||
# 0 - Disable both magic pattern match and pattern byte match.
|
||||
# 1 - Enable magic pattern match on all interfaces.
|
||||
# 2 - Enable pattern byte match on all interfaces.
|
||||
# 3 - Enable both magic pattern and pattern byte match on all interfaces.
|
||||
# Default value of gEnableWoW is 3.
|
||||
# gEnableWoW=0
|
||||
|
||||
# Enable or Disable MCC Adaptive Scheduler at the FW
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMCCAdaptiveScheduler=1
|
||||
|
||||
#Enable or Disable p2p device address administered
|
||||
isP2pDeviceAddrAdministrated=0
|
||||
|
||||
# Set Thermal Power limit
|
||||
TxPower2g=10
|
||||
TxPower5g=10
|
||||
|
||||
# Remove Overlap channel restriction
|
||||
gEnableOverLapCh=0
|
||||
|
||||
#Enable VHT on 2.4Ghz
|
||||
gEnableVhtFor24GHzBand=1
|
||||
|
||||
#Maximum number of offload peers supported
|
||||
# gMaxOffloadPeers=2
|
||||
|
||||
# controlling the following offload patterns
|
||||
# through ini parameter. Default value is 1
|
||||
# to disable set it to zero. ssdp = 0
|
||||
# Setup multicast pattern for mDNS 224.0.0.251,
|
||||
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
||||
ssdp=0
|
||||
|
||||
#Enable Memory Deep Sleep
|
||||
gEnableMemDeepSleep=1
|
||||
|
||||
# RA filtering rate limit param, the current value would not
|
||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
||||
# we need to change it, though it is uncommon.
|
||||
# gRAFilterEnable=0
|
||||
gRArateLimitInterval=600
|
||||
|
||||
# Maximum number of concurrent connections
|
||||
gMaxConcurrentActiveSessions=3
|
||||
|
||||
# Disable/Enable GreenAP
|
||||
# 0 to disable, 1 to enable, default: 1
|
||||
gEnableGreenAp=0
|
||||
|
||||
gPNOScanSupport=1
|
||||
|
||||
#Enable/Disable LPASS support
|
||||
# 0 to disable, 1 to enable
|
||||
gEnableLpassSupport=1
|
||||
|
||||
# Whether userspace country code setting shld have priority
|
||||
gCountryCodePriority=1
|
||||
|
||||
# Enable(1)/Disable(0) SIFS burst
|
||||
#ifdef VENDOR_EDIT
|
||||
#Min: 0 disabled
|
||||
#Max: 3 enabled802.11g
|
||||
#Default: 1 enabled, but disabled for legacy mode
|
||||
gEnableSifsBurst=3
|
||||
#else
|
||||
# gEnableSifsBurst=1
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# Enable or Disable Multi-user MIMO
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMuBformee=1
|
||||
|
||||
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
||||
gIbssTxSpEndInactivityTime=10
|
||||
|
||||
# Enable support for TDLS
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSSupport=1
|
||||
|
||||
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
||||
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
||||
# and RSSI) is met and then will initiate teardown when teardown criteria
|
||||
# (idle packet count and RSSI) is met.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSImplicitTrigger=1
|
||||
|
||||
# Enable TDLS External Control. That is, user space application has to
|
||||
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
||||
# Device will establish TDLS only towards those configured peers whenever
|
||||
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
||||
# when teardown criteria (idle packet count and RSSI) is met. However,
|
||||
# device will accept TDLS connection if it is initiated from any other peer,
|
||||
# even if that peer is not configured.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# For TDLS External Control, Implicit Trigger must also be enabled.
|
||||
gTDLSExternalControl=1
|
||||
|
||||
# Enable support for TDLS off-channel operation
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# TDLS off-channel operation will be invoked when there is only one
|
||||
# TDLS connection.
|
||||
gEnableTDLSOffChannel=1
|
||||
|
||||
# Enable or Disable Random MAC (Spoofing)
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMacAddrSpoof=1
|
||||
|
||||
################ Datapath feature set Begin ################
|
||||
# Bus bandwidth threshold values in terms of number of packets
|
||||
gBusBandwidthHighThreshold=2000
|
||||
gBusBandwidthMediumThreshold=500
|
||||
gBusBandwidthLowThreshold=150
|
||||
|
||||
# Bus bandwidth compute timeout value in ms
|
||||
gBusBandwidthComputeInterval=100
|
||||
|
||||
# VHT Tx/Rx MCS values
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gVhtRxMCS=2
|
||||
gVhtTxMCS=2
|
||||
|
||||
# VHT Tx/Rx MCS values for 2x2
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gEnable2x2=1
|
||||
gVhtRxMCS2x2=2
|
||||
gVhtTxMCS2x2=2
|
||||
|
||||
#IPA config is a bit mask and following are the configurations.
|
||||
#bit0 IPA Enable
|
||||
#bit1 IPA PRE Filter enable
|
||||
#bit2 IPv6 enable
|
||||
#bit3 IPA Resource Manager (RM) enable
|
||||
#bit4 IPA Clock scaling enable
|
||||
#bit5 IPA uC ENABLE
|
||||
#bit6 IPA uC STA ENABLE
|
||||
#bit8 IPA Real Time Debugging
|
||||
gIPAConfig=0x7d
|
||||
gIPADescSize=800
|
||||
|
||||
# Enable/Disable RX full reorder offload
|
||||
gReorderOffloadSupported=1
|
||||
|
||||
# Enable CE classification
|
||||
# 1 - enable(default) 0 - disable
|
||||
gCEClassifyEnable=1
|
||||
|
||||
# Enable Rx handling options
|
||||
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
|
||||
# DP_RX_THREAD=16 (1 << 4)
|
||||
# 20 = (DP_RX_THREAD | NAPI)
|
||||
rx_mode=20
|
||||
|
||||
# Enable(Tx) fastpath for data traffic.
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableFastPath=1
|
||||
|
||||
# This flag enables IP, TCP and UDP checksum offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableIpTcpUdpChecksumOffload=1
|
||||
|
||||
# Enable TCP Segmentation Offload
|
||||
# 1 - enable 0 - disable
|
||||
TSOEnable=1
|
||||
|
||||
# Enable Generic Receive Offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
GROEnable=1
|
||||
|
||||
# Enable HT MPDU Density
|
||||
# 4 for 2 micro sec
|
||||
ght_mpdu_density=4
|
||||
|
||||
# Enable flow steering to enable multiple CEs for Rx flows.
|
||||
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
||||
# Parallel Rx paths.
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableFlowSteering=1
|
||||
|
||||
# Time in microseconds after which a NAPI poll must yield
|
||||
ce_service_max_yield_time=500
|
||||
|
||||
#Maximum number of HTT messages to be processed per NAPI poll
|
||||
ce_service_max_rx_ind_flush=1
|
||||
|
||||
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
||||
maxMSDUsPerRxInd=8
|
||||
|
||||
# Enable NUD tracking feature
|
||||
# 1 - enable 0 - disable(default)
|
||||
#ifndef VENDOR_EDIT
|
||||
# richy.li@Connectivity, 2019/10/11, [Q porting] align the vowifi behavior with 18811.
|
||||
#gEnableNUDTracking=1
|
||||
#else
|
||||
gEnableNUDTracking=0
|
||||
#endif /* VENDOR_EDIT */
|
||||
################ Datapath feature set End ################
|
||||
|
||||
################ NAN feature set start ###################
|
||||
|
||||
# Enable NAN discovery (NAN 1.0)
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNanSupport=1
|
||||
# Enable NAN Datapath
|
||||
genable_nan_datapath=1
|
||||
|
||||
################ NAN feature set end #####################
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
adaptive_dwell_mode_enabled=0
|
||||
#else
|
||||
#adaptive_dwell_mode_enabled=1
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
|
||||
adapt_dwell_lpf_weight=80
|
||||
|
||||
adapt_dwell_wifi_act_threshold=10
|
||||
|
||||
MAWCEnabled=0
|
||||
|
||||
drop_bcn_on_chan_mismatch=0
|
||||
|
||||
# Enable/Disable rtt sta mac randomization
|
||||
enable_rtt_mac_randomization=1
|
||||
|
||||
#Enable/Disable SNR monitoring
|
||||
gEnableSNRMonitoring=1
|
||||
|
||||
# HTC Credit count for WMI operation
|
||||
# 1 to serialize the WMI commands
|
||||
# 0 default works with FW advertised credits, 2 credits usually
|
||||
gWmiCreditCount=1
|
||||
|
||||
# Enable enhanced ACS
|
||||
acs_with_more_param=1
|
||||
# bits 0-3: rssi weight
|
||||
# bits 4-7: bss count weight
|
||||
# bits 8-11: noise floor weight
|
||||
# bits 12-15: channel free weight
|
||||
# bits 16-19: tx power range weight
|
||||
# bits 20-23: tx power throughput weight
|
||||
# bits 24-31: reserved
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
|
||||
# Enable/Disable broadcast TWT
|
||||
bcast_twt=1
|
||||
|
||||
# Enable Runtime PM
|
||||
#gRuntimePM=1
|
||||
|
||||
# Enable broadcast logging to the userspace entities
|
||||
gMulticastHostFwMsgs=1
|
||||
# Disable packetlog explicitly
|
||||
#ifndef VENDOR_EDIT
|
||||
#gEnablePacketLog=0
|
||||
#else
|
||||
global_adapt_dwelltime_mode=1
|
||||
roamscan_adaptive_dwell_mode=1
|
||||
extscan_adaptive_dwell_mode=1
|
||||
pnoscan_adaptive_dwell_mode=1
|
||||
active_max_channel_time_2g=60
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# Set IPA bandwidth levels in mbps
|
||||
gIPALowBandwidthMbps=100
|
||||
gIPAMediumBandwidthMbps=400
|
||||
gIPAHighBandwidthMbps=800
|
||||
spectral_disable=1
|
||||
|
||||
END
|
||||
|
||||
# Note: Configuration parser would not read anything past the END marker
|
||||
|
||||
5
wifi/p2p_supplicant_overlay.conf
Normal file
5
wifi/p2p_supplicant_overlay.conf
Normal file
|
|
@ -0,0 +1,5 @@
|
|||
disable_scan_offload=1
|
||||
p2p_no_group_iface=1
|
||||
persistent_reconnect=1
|
||||
bss_max_count=400
|
||||
p2p_pref_chan=115:36, 116:36, 115:40, 116:40, 117:40, 115:44, 116:44, 117:44, 115:48, 117:48, 124:149, 125:149, 126:149, 124:153, 125:153, 126:153, 127:153, 124:157, 125:157, 126:157, 127:157, 124:161, 125:161, 127:161, 125:165, 81:1, 81:6, 81:11
|
||||
566
wifi/qca6390/WCNSS_qcom_cfg.ini
Normal file
566
wifi/qca6390/WCNSS_qcom_cfg.ini
Normal file
|
|
@ -0,0 +1,566 @@
|
|||
# This file allows user to override the factory
|
||||
# defaults for the WLAN Driver
|
||||
|
||||
#Below ini copied from LA.UM.0.6.3
|
||||
# ifdef VENDOR_EDIT
|
||||
gDualMacFeatureDisable=6
|
||||
gInitialScanNoDFSChnl=1
|
||||
#gInitialDwellTime=20
|
||||
#ifndef VENDOR_EDIT
|
||||
#Use dynamic iwpriv to control
|
||||
#gSoftApMaxPeers=8
|
||||
#endif VENDOR_EDIT
|
||||
gRoamBmissFirstBcnt=15
|
||||
gRoamBmissFinalBcnt=25
|
||||
gDroppedPktDisconnectTh=1024
|
||||
# Runtime is default zero in hostdriver
|
||||
gRuntimePM=0
|
||||
gRAFilterEnable=0
|
||||
gMCAddrListEnable=1
|
||||
# 0: disable feature (default)
|
||||
# 1: drop all broadcast frames, except ARP
|
||||
# 2: drop all multicast frames, except ICMPv6
|
||||
# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
|
||||
gHwFilterMode=3
|
||||
gBpfFilterEnable=1
|
||||
#gFwDebugLogLevel=3
|
||||
#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
|
||||
gChannelBondingMode24GHz=0
|
||||
gStaKeepAlivePeriod=30
|
||||
gper_roam_enabled=3
|
||||
gper_roam_th_percent=80
|
||||
gper_min_rssi_threshold_for_roam=70
|
||||
gItoRepeatCount=5
|
||||
gDisablePacketFilter=0
|
||||
#ifndef VENDOR_EDIT
|
||||
#g_enable_packet_filter_bitmap=3
|
||||
#else
|
||||
# for layer2(mac) multicast, layer3(ip) multicast filter
|
||||
g_enable_packet_filter_bitmap=7
|
||||
#endif /* VENDOR_EDIT */
|
||||
gEnableModulatedDTIM=3
|
||||
gMaxLIModulatedDTIM=6
|
||||
#gActiveModeOffload=0
|
||||
gReportMaxLinkSpeed=2
|
||||
gEnableTDLSScan=1
|
||||
gEnableTxSUBeamformer=0
|
||||
gEnableSelfRecovery=1
|
||||
# endif /* VENDOR_EDIT */
|
||||
fw_timeout_crash=1
|
||||
|
||||
# Phy Mode (auto, b, g, n, etc)
|
||||
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
||||
# 7 = 11b only 8 = 11ac only.
|
||||
gDot11Mode=0
|
||||
|
||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
||||
InfraUapsdVoSrvIntv=0
|
||||
InfraUapsdViSrvIntv=0
|
||||
InfraUapsdBeSrvIntv=0
|
||||
InfraUapsdBkSrvIntv=0
|
||||
|
||||
# Flag to allow STA send AddTspec even when ACM is Off
|
||||
gAddTSWhenACMIsOff=1
|
||||
|
||||
# ifdef VENDOR_EDIT
|
||||
# Enable IMPS or not
|
||||
gEnableImps=1
|
||||
|
||||
# Enable BMPS or not
|
||||
gEnableBmps=1
|
||||
|
||||
# Enable Qpower or not on SM8250_R paltform, 0 for disable
|
||||
gOptimizedPowerManagement=0
|
||||
|
||||
#Flag to enable HostARPOffload feature or not
|
||||
hostArpOffload=1
|
||||
|
||||
#Flag to enable HostNSOffload feature or not
|
||||
hostNSOffload=1
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# 802.11n Protection flag
|
||||
gEnableApProt=1
|
||||
|
||||
#Enable OBSS protection
|
||||
gEnableApOBSSProt=1
|
||||
|
||||
#Enable/Disable UAPSD for SoftAP
|
||||
gEnableApUapsd=1
|
||||
|
||||
# Maximum Tx power
|
||||
# gTxPowerCap=30
|
||||
|
||||
# Fragmentation Threshold
|
||||
# gFragmentationThreshold=2346
|
||||
|
||||
# RTS threshold
|
||||
RTSThreshold=1048576
|
||||
|
||||
# Intra-BSS forward
|
||||
gDisableIntraBssFwd=0
|
||||
|
||||
# WMM Enable/Disable
|
||||
WmmIsEnabled=0
|
||||
|
||||
# 802.11d support
|
||||
#ifdef VENDOR_EDIT
|
||||
g11dSupportEnabled=1
|
||||
#else
|
||||
#g11dSupportEnabled=0
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# 802.11h support
|
||||
g11hSupportEnabled=1
|
||||
|
||||
# DFS Master Capability
|
||||
#ifdef VENDOR_EDIT
|
||||
gEnableDFSMasterCap=0
|
||||
#else
|
||||
#gEnableDFSMasterCap=1
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# ESE Support and fast transition
|
||||
EseEnabled=0
|
||||
|
||||
ImplicitQosIsEnabled=0
|
||||
|
||||
gNeighborScanTimerPeriod=200
|
||||
gNeighborLookupThreshold=76
|
||||
gNeighborScanChannelMinTime=20
|
||||
|
||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
||||
# To enable, set FastRoamEnabled=1
|
||||
# To disable, set FastRoamEnabled=0
|
||||
FastRoamEnabled=1
|
||||
|
||||
# Check if the AP to which we are roaming is better than current AP in
|
||||
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
|
||||
# use this value as to how better the RSSI of the new/roamable AP should
|
||||
# be for roaming
|
||||
RoamRssiDiff=5
|
||||
|
||||
# To enable, set gRoamIntraBand=1 (Roaming within band)
|
||||
# To disable, set gRoamIntraBand=0 (Roaming across band)
|
||||
gRoamIntraBand=0
|
||||
|
||||
#Short Guard Interval Enable/disable
|
||||
gShortGI20Mhz=1
|
||||
gShortGI40Mhz=1
|
||||
|
||||
#Preferred band (both or 2.4 only or 5 only)
|
||||
BandCapability=0
|
||||
|
||||
#Channel Bonding
|
||||
gChannelBondingMode5GHz=1
|
||||
|
||||
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
||||
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
||||
#is idle for last 10 seconds.) For both active and power save clients.
|
||||
|
||||
#Power save clients: DUT set TIM bit from 10th second onwards and till client
|
||||
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
|
||||
|
||||
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
|
||||
#success still we try on 11th second if not tries on 12th and so on till 15th
|
||||
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
|
||||
#case DUT will detect client got removed in (10+5) seconds.
|
||||
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
||||
|
||||
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
|
||||
#it is period where we send NULL frame.
|
||||
#gApLinkMonitorPeriod = 10
|
||||
#gGoLinkMonitorPeriod = 10
|
||||
|
||||
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#are succeed to send or not. Hence total effective detection time is
|
||||
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
|
||||
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
gGoKeepAlivePeriod = 20
|
||||
#ifdef VENDOR_EDIT
|
||||
gApKeepAlivePeriod = 20
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
#If set to 0, will not scan DFS channels
|
||||
gEnableDFSChnlScan=1
|
||||
|
||||
# Enable DFS channel roam
|
||||
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
||||
gAllowDFSChannelRoam=1
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
# Enable ETSI13 hotspot on SRD channel
|
||||
etsi13_srd_chan_in_master_mode=1
|
||||
#endif VENDOR_EDIT
|
||||
|
||||
gVhtChannelWidth=2
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
#Data Inactivity Timeout when in powersave (in ms)
|
||||
gDataInactivityTimeout=200
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# Set txchainmask and rxchainmask
|
||||
# These parameters are used only if gEnable2x2 is 0
|
||||
# Valid values are 1,2
|
||||
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
||||
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
||||
gSetTxChainmask1x1=1
|
||||
gSetRxChainmask1x1=1
|
||||
|
||||
# Scan Timing Parameters
|
||||
# gPassiveMaxChannelTime=110
|
||||
#ifdef VENDOR_EDIT
|
||||
gActiveMaxChannelTime=60
|
||||
gActiveMinChannelTime=40
|
||||
#else
|
||||
#gActiveMaxChannelTime=40
|
||||
#gActiveMinChannelTime=20
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
#If set to 0, MCC is not allowed.
|
||||
gEnableMCCMode=1
|
||||
|
||||
# MCC to SCC Switch mode:
|
||||
# 0-Disable
|
||||
# 1-Enable
|
||||
# 2-Force SCC if same band, with SAP restart
|
||||
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
||||
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
||||
# without SAP restart by sending (E)CSA
|
||||
gWlanMccToSccSwitchMode = 3
|
||||
|
||||
# 1=enable STBC; 0=disable STBC
|
||||
gEnableRXSTBC=1
|
||||
|
||||
# 1=enable tx STBC; 0=disable
|
||||
gEnableTXSTBC=1
|
||||
|
||||
# 1=enable rx LDPC; 0=disable
|
||||
gEnableRXLDPC=1
|
||||
|
||||
#Enable/Disable Tx beamforming
|
||||
gTxBFEnable=1
|
||||
|
||||
#Enable/Disable Tx beamformee in SAP mode
|
||||
gEnableTxBFeeSAP=1
|
||||
|
||||
# Enable Tx beamforming in VHT20MHz
|
||||
# Valid values are 0,1. If commented out, the default value is 0.
|
||||
# 0=disable, 1=enable
|
||||
gEnableTxBFin20MHz=1
|
||||
|
||||
#Enable/Disable SU Tx beamformer support
|
||||
#gEnableTxSUBeamformer=1
|
||||
|
||||
gEnableFastRoamInConcurrency=1
|
||||
|
||||
# 802.11K support
|
||||
gRrmEnable=1
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
#Enable Power Save offload
|
||||
gEnablePowerSaveOffload=1
|
||||
#else
|
||||
#gEnablePowerSaveOffload=2
|
||||
|
||||
#Enable firmware uart print
|
||||
gEnablefwprint=0
|
||||
#endif VENDOR_EDIT
|
||||
|
||||
# Firmware log mode
|
||||
# Valid values are 0,1,2
|
||||
# 0=Disable, 1=WMI, 2=DIAG
|
||||
gEnablefwlog=1
|
||||
|
||||
# Maximum Receive AMPDU size (VHT only. Valid values:
|
||||
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
||||
gVhtAmpduLenExponent=7
|
||||
|
||||
# Maximum MPDU length (VHT only. Valid values:
|
||||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
||||
gVhtMpduLen=2
|
||||
|
||||
# WOW Enable/Disable.
|
||||
# 0 - Disable both magic pattern match and pattern byte match.
|
||||
# 1 - Enable magic pattern match on all interfaces.
|
||||
# 2 - Enable pattern byte match on all interfaces.
|
||||
# 3 - Enable both magic pattern and pattern byte match on all interfaces.
|
||||
# Default value of gEnableWoW is 3.
|
||||
# gEnableWoW=0
|
||||
|
||||
# Enable or Disable MCC Adaptive Scheduler at the FW
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMCCAdaptiveScheduler=1
|
||||
|
||||
#Enable or Disable p2p device address administered
|
||||
isP2pDeviceAddrAdministrated=0
|
||||
|
||||
# Set Thermal Power limit
|
||||
TxPower2g=10
|
||||
TxPower5g=10
|
||||
|
||||
# Remove Overlap channel restriction
|
||||
gEnableOverLapCh=0
|
||||
|
||||
#Enable VHT on 2.4Ghz
|
||||
gEnableVhtFor24GHzBand=1
|
||||
|
||||
#Maximum number of offload peers supported
|
||||
# gMaxOffloadPeers=2
|
||||
|
||||
# controlling the following offload patterns
|
||||
# through ini parameter. Default value is 1
|
||||
# to disable set it to zero. ssdp = 0
|
||||
# Setup multicast pattern for mDNS 224.0.0.251,
|
||||
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
||||
ssdp=0
|
||||
|
||||
#Enable Memory Deep Sleep
|
||||
gEnableMemDeepSleep=1
|
||||
|
||||
# RA filtering rate limit param, the current value would not
|
||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
||||
# we need to change it, though it is uncommon.
|
||||
# gRAFilterEnable=0
|
||||
gRArateLimitInterval=600
|
||||
|
||||
# Maximum number of concurrent connections
|
||||
gMaxConcurrentActiveSessions=3
|
||||
|
||||
# Disable/Enable GreenAP
|
||||
# 0 to disable, 1 to enable, default: 1
|
||||
gEnableGreenAp=0
|
||||
|
||||
gPNOScanSupport=1
|
||||
|
||||
#Enable/Disable LPASS support
|
||||
# 0 to disable, 1 to enable
|
||||
gEnableLpassSupport=1
|
||||
|
||||
# Whether userspace country code setting shld have priority
|
||||
gCountryCodePriority=1
|
||||
|
||||
# Enable(1)/Disable(0) SIFS burst
|
||||
#ifdef VENDOR_EDIT
|
||||
#Min: 0 disabled
|
||||
#Max: 3 enabled802.11g
|
||||
#Default: 1 enabled, but disabled for legacy mode
|
||||
gEnableSifsBurst=3
|
||||
#else
|
||||
# gEnableSifsBurst=1
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# Enable or Disable Multi-user MIMO
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMuBformee=1
|
||||
|
||||
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
||||
gIbssTxSpEndInactivityTime=10
|
||||
|
||||
# Enable support for TDLS
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSSupport=1
|
||||
|
||||
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
||||
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
||||
# and RSSI) is met and then will initiate teardown when teardown criteria
|
||||
# (idle packet count and RSSI) is met.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSImplicitTrigger=1
|
||||
|
||||
# Enable TDLS External Control. That is, user space application has to
|
||||
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
||||
# Device will establish TDLS only towards those configured peers whenever
|
||||
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
||||
# when teardown criteria (idle packet count and RSSI) is met. However,
|
||||
# device will accept TDLS connection if it is initiated from any other peer,
|
||||
# even if that peer is not configured.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# For TDLS External Control, Implicit Trigger must also be enabled.
|
||||
gTDLSExternalControl=1
|
||||
|
||||
# Enable support for TDLS off-channel operation
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# TDLS off-channel operation will be invoked when there is only one
|
||||
# TDLS connection.
|
||||
gEnableTDLSOffChannel=1
|
||||
|
||||
# Enable or Disable Random MAC (Spoofing)
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMacAddrSpoof=1
|
||||
|
||||
################ Datapath feature set Begin ################
|
||||
# Bus bandwidth threshold values in terms of number of packets
|
||||
gBusBandwidthHighThreshold=2000
|
||||
gBusBandwidthMediumThreshold=500
|
||||
gBusBandwidthLowThreshold=150
|
||||
|
||||
# Bus bandwidth compute timeout value in ms
|
||||
gBusBandwidthComputeInterval=100
|
||||
|
||||
# VHT Tx/Rx MCS values
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gVhtRxMCS=2
|
||||
gVhtTxMCS=2
|
||||
|
||||
# VHT Tx/Rx MCS values for 2x2
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gEnable2x2=1
|
||||
gVhtRxMCS2x2=2
|
||||
gVhtTxMCS2x2=2
|
||||
|
||||
#IPA config is a bit mask and following are the configurations.
|
||||
#bit0 IPA Enable
|
||||
#bit1 IPA PRE Filter enable
|
||||
#bit2 IPv6 enable
|
||||
#bit3 IPA Resource Manager (RM) enable
|
||||
#bit4 IPA Clock scaling enable
|
||||
#bit5 IPA uC ENABLE
|
||||
#bit6 IPA uC STA ENABLE
|
||||
#bit8 IPA Real Time Debugging
|
||||
gIPAConfig=0x7d
|
||||
gIPADescSize=800
|
||||
|
||||
# Enable/Disable RX full reorder offload
|
||||
gReorderOffloadSupported=1
|
||||
|
||||
# Enable CE classification
|
||||
# 1 - enable(default) 0 - disable
|
||||
gCEClassifyEnable=1
|
||||
|
||||
# Enable Rx handling options
|
||||
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
|
||||
# DP_RX_THREAD=16 (1 << 4)
|
||||
# 20 = (DP_RX_THREAD | NAPI)
|
||||
rx_mode=20
|
||||
|
||||
# Enable(Tx) fastpath for data traffic.
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableFastPath=1
|
||||
|
||||
# This flag enables IP, TCP and UDP checksum offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableIpTcpUdpChecksumOffload=1
|
||||
|
||||
# Enable TCP Segmentation Offload
|
||||
# 1 - enable 0 - disable
|
||||
TSOEnable=1
|
||||
|
||||
# Enable Generic Receive Offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
GROEnable=1
|
||||
|
||||
# Enable HT MPDU Density
|
||||
# 4 for 2 micro sec
|
||||
ght_mpdu_density=4
|
||||
|
||||
# Enable flow steering to enable multiple CEs for Rx flows.
|
||||
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
||||
# Parallel Rx paths.
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableFlowSteering=1
|
||||
|
||||
# Time in microseconds after which a NAPI poll must yield
|
||||
ce_service_max_yield_time=500
|
||||
|
||||
#Maximum number of HTT messages to be processed per NAPI poll
|
||||
ce_service_max_rx_ind_flush=1
|
||||
|
||||
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
||||
maxMSDUsPerRxInd=8
|
||||
|
||||
# Enable NUD tracking feature
|
||||
# 1 - enable 0 - disable(default)
|
||||
#ifndef VENDOR_EDIT
|
||||
# richy.li@Connectivity, 2019/10/11, [Q porting] align the vowifi behavior with 18811.
|
||||
#gEnableNUDTracking=1
|
||||
#else
|
||||
gEnableNUDTracking=0
|
||||
#endif /* VENDOR_EDIT */
|
||||
################ Datapath feature set End ################
|
||||
|
||||
################ NAN feature set start ###################
|
||||
|
||||
# Enable NAN discovery (NAN 1.0)
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNanSupport=1
|
||||
# Enable NAN Datapath
|
||||
genable_nan_datapath=1
|
||||
|
||||
################ NAN feature set end #####################
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
adaptive_dwell_mode_enabled=0
|
||||
#else
|
||||
#adaptive_dwell_mode_enabled=1
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
|
||||
adapt_dwell_lpf_weight=80
|
||||
|
||||
adapt_dwell_wifi_act_threshold=10
|
||||
|
||||
MAWCEnabled=0
|
||||
|
||||
drop_bcn_on_chan_mismatch=0
|
||||
|
||||
# Enable/Disable rtt sta mac randomization
|
||||
enable_rtt_mac_randomization=1
|
||||
|
||||
#Enable/Disable SNR monitoring
|
||||
gEnableSNRMonitoring=1
|
||||
|
||||
# HTC Credit count for WMI operation
|
||||
# 1 to serialize the WMI commands
|
||||
# 0 default works with FW advertised credits, 2 credits usually
|
||||
gWmiCreditCount=1
|
||||
|
||||
# Enable enhanced ACS
|
||||
acs_with_more_param=1
|
||||
# bits 0-3: rssi weight
|
||||
# bits 4-7: bss count weight
|
||||
# bits 8-11: noise floor weight
|
||||
# bits 12-15: channel free weight
|
||||
# bits 16-19: tx power range weight
|
||||
# bits 20-23: tx power throughput weight
|
||||
# bits 24-31: reserved
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
|
||||
# Enable/Disable broadcast TWT
|
||||
bcast_twt=1
|
||||
|
||||
# Enable Runtime PM
|
||||
#gRuntimePM=1
|
||||
|
||||
# Enable broadcast logging to the userspace entities
|
||||
gMulticastHostFwMsgs=1
|
||||
# Disable packetlog explicitly
|
||||
#ifndef VENDOR_EDIT
|
||||
#gEnablePacketLog=0
|
||||
#else
|
||||
global_adapt_dwelltime_mode=1
|
||||
roamscan_adaptive_dwell_mode=1
|
||||
extscan_adaptive_dwell_mode=1
|
||||
pnoscan_adaptive_dwell_mode=1
|
||||
active_max_channel_time_2g=60
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# Set IPA bandwidth levels in mbps
|
||||
gIPALowBandwidthMbps=100
|
||||
gIPAMediumBandwidthMbps=400
|
||||
gIPAHighBandwidthMbps=800
|
||||
spectral_disable=1
|
||||
|
||||
END
|
||||
|
||||
# Note: Configuration parser would not read anything past the END marker
|
||||
|
||||
565
wifi/qca6390/WCNSS_qcom_cfg_cta_kona_8.ini
Normal file
565
wifi/qca6390/WCNSS_qcom_cfg_cta_kona_8.ini
Normal file
|
|
@ -0,0 +1,565 @@
|
|||
# This file allows user to override the factory
|
||||
# defaults for the WLAN Driver
|
||||
|
||||
#Below ini copied from LA.UM.0.6.3
|
||||
# ifdef VENDOR_EDIT
|
||||
# CTA test config
|
||||
gEnableImps=0
|
||||
gEnableBmps=0
|
||||
EseEnabled=0
|
||||
FastRoamEnabled=0
|
||||
gPNOScanSupport=0
|
||||
gEnablePowerSaveOffload=1
|
||||
gRuntimePM=0
|
||||
gEnableFWRssiMonitoring=0
|
||||
gRoamOffloadEnabled=0
|
||||
gRoamScanOffloadEnabled=0
|
||||
|
||||
#TODO: this flag will cause wifi enabled fail
|
||||
#FastTransitionEnabled=0
|
||||
# CTA test config
|
||||
gInitialScanNoDFSChnl=1
|
||||
#gInitialDwellTime=20
|
||||
gSoftApMaxPeers=8
|
||||
gRoamBmissFirstBcnt=15
|
||||
gRoamBmissFinalBcnt=25
|
||||
gDroppedPktDisconnectTh=1024
|
||||
# Runtime is default zero in hostdriver
|
||||
#gRuntimePM=0
|
||||
gRAFilterEnable=0
|
||||
gMCAddrListEnable=1
|
||||
# 0: disable feature (default)
|
||||
# 1: drop all broadcast frames, except ARP
|
||||
# 2: drop all multicast frames, except ICMPv6
|
||||
# 3: drop all broadcast and multicast frames, except ARP and ICMPv6
|
||||
gHwFilterMode=3
|
||||
gBpfFilterEnable=1
|
||||
#gFwDebugLogLevel=3
|
||||
#gFwDebugModuleLoglevel=2,1,3,1,5,1,9,1,13,1,14,1,18,1,19,1,26,1,28,1,29,1,31,1,36,1,38,1,46,1,47,1,50,1,52,1,53,1,56,1,60,1,61,1
|
||||
gChannelBondingMode24GHz=0
|
||||
gForce1x1Exception=0
|
||||
gStaKeepAlivePeriod=30
|
||||
gper_roam_enabled=3
|
||||
gper_roam_th_percent=80
|
||||
gper_min_rssi_threshold_for_roam=70
|
||||
gItoRepeatCount=5
|
||||
gDisablePacketFilter=0
|
||||
g_enable_packet_filter_bitmap=3
|
||||
LROEnable=0
|
||||
gEnableModulatedDTIM=3
|
||||
gMaxLIModulatedDTIM=6
|
||||
#gActiveModeOffload=0
|
||||
gActionOUISwitchTo11nMode="FFFFFF 03 FFFFBF 20 21 40"
|
||||
gReportMaxLinkSpeed=2
|
||||
gEnableSelfRecovery=0
|
||||
gEnableTxSUBeamformer=0
|
||||
# endif /* VENDOR_EDIT */
|
||||
fw_timeout_crash=1
|
||||
|
||||
# Phy Mode (auto, b, g, n, etc)
|
||||
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
|
||||
# 1 = 11abg, 2 = 11b, 3 = 11g, 5 = 11g only, 6 = 11n only
|
||||
# 7 = 11b only 8 = 11ac only.
|
||||
gDot11Mode=0
|
||||
|
||||
# UAPSD service interval for VO,VI, BE, BK traffic
|
||||
InfraUapsdVoSrvIntv=0
|
||||
InfraUapsdViSrvIntv=0
|
||||
InfraUapsdBeSrvIntv=0
|
||||
InfraUapsdBkSrvIntv=0
|
||||
|
||||
# Flag to allow STA send AddTspec even when ACM is Off
|
||||
gAddTSWhenACMIsOff=1
|
||||
|
||||
# ifdef VENDOR_EDIT
|
||||
# Enable IMPS or not
|
||||
#gEnableImps=1
|
||||
|
||||
# Enable BMPS or not
|
||||
#gEnableBmps=1
|
||||
|
||||
#Flag to enable HostARPOffload feature or not
|
||||
hostArpOffload=1
|
||||
|
||||
#Flag to enable HostNSOffload feature or not
|
||||
hostNSOffload=1
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# 802.11n Protection flag
|
||||
gEnableApProt=1
|
||||
|
||||
#Enable OBSS protection
|
||||
gEnableApOBSSProt=1
|
||||
|
||||
#Enable/Disable UAPSD for SoftAP
|
||||
gEnableApUapsd=1
|
||||
|
||||
# Maximum Tx power
|
||||
# gTxPowerCap=30
|
||||
|
||||
# Fragmentation Threshold
|
||||
# gFragmentationThreshold=2346
|
||||
|
||||
# RTS threshold
|
||||
RTSThreshold=1048576
|
||||
|
||||
# Intra-BSS forward
|
||||
gDisableIntraBssFwd=0
|
||||
|
||||
# WMM Enable/Disable
|
||||
WmmIsEnabled=0
|
||||
|
||||
# 802.11d support
|
||||
#ifdef VENDOR_EDIT
|
||||
g11dSupportEnabled=1
|
||||
#else
|
||||
#g11dSupportEnabled=0
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# 802.11h support
|
||||
g11hSupportEnabled=1
|
||||
|
||||
# DFS Master Capability
|
||||
gEnableDFSMasterCap=1
|
||||
|
||||
|
||||
# ESE Support and fast transition
|
||||
# EseEnabled=0
|
||||
|
||||
ImplicitQosIsEnabled=0
|
||||
|
||||
gNeighborScanTimerPeriod=200
|
||||
gNeighborLookupThreshold=76
|
||||
gNeighborScanChannelMinTime=20
|
||||
|
||||
# Legacy (non-ESE, non-802.11r) Fast Roaming Support
|
||||
# To enable, set FastRoamEnabled=1
|
||||
# To disable, set FastRoamEnabled=0
|
||||
#FastRoamEnabled=1
|
||||
|
||||
# Check if the AP to which we are roaming is better than current AP in
|
||||
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
|
||||
# use this value as to how better the RSSI of the new/roamable AP should
|
||||
# be for roaming
|
||||
RoamRssiDiff=5
|
||||
|
||||
# To enable, set gRoamIntraBand=1 (Roaming within band)
|
||||
# To disable, set gRoamIntraBand=0 (Roaming across band)
|
||||
gRoamIntraBand=0
|
||||
|
||||
#Short Guard Interval Enable/disable
|
||||
gShortGI20Mhz=1
|
||||
gShortGI40Mhz=1
|
||||
|
||||
#Preferred band (both or 2.4 only or 5 only)
|
||||
BandCapability=0
|
||||
|
||||
#Channel Bonding
|
||||
gChannelBondingMode5GHz=1
|
||||
|
||||
#Say gGoKeepAlivePeriod(5 seconds) and gGoLinkMonitorPeriod(10 seconds).
|
||||
#For every 10 seconds DUT send Qos Null frame(i.e., Keep Alive frame if link
|
||||
#is idle for last 10 seconds.) For both active and power save clients.
|
||||
|
||||
#Power save clients: DUT set TIM bit from 10th second onwards and till client
|
||||
#honors TIM bit. If doesn't honor for 5 seconds then DUT remove client.
|
||||
|
||||
#Active clients: DUT send Qos Null frame for 10th seconds onwards if it is not
|
||||
#success still we try on 11th second if not tries on 12th and so on till 15th
|
||||
#second. Hence before disconnection DUT will send 5 NULL frames. Hence in any
|
||||
#case DUT will detect client got removed in (10+5) seconds.
|
||||
#i.e., (gGoKeepAlivePeriod + gGoLinkMonitorPeriod)..
|
||||
|
||||
#gGoLinkMonitorPeriod/ gApLinkMonitorPeriod is period where link is idle and
|
||||
#it is period where we send NULL frame.
|
||||
#gApLinkMonitorPeriod = 10
|
||||
#gGoLinkMonitorPeriod = 10
|
||||
|
||||
#gGoKeepAlivePeriod/gApKeepAlivePeriod is time to spend to check whether frame
|
||||
#are succeed to send or not. Hence total effective detection time is
|
||||
# (gGoLinkMonitorPeriod + gGoKeepAlivePeriod) /
|
||||
# (gApLinkMonitorPeriod + gApKeepAlivePeriod)
|
||||
gGoKeepAlivePeriod = 20
|
||||
#ifdef VENDOR_EDIT
|
||||
gApKeepAlivePeriod = 20
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
#If set to 0, will not scan DFS channels
|
||||
gEnableDFSChnlScan=1
|
||||
|
||||
# Enable DFS channel roam
|
||||
# 0: DISABLE, 1: ENABLED_NORMAL, 2: ENABLED_ACTIVE
|
||||
gAllowDFSChannelRoam=1
|
||||
|
||||
gVhtChannelWidth=2
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
#Data Inactivity Timeout when in powersave (in ms)
|
||||
gDataInactivityTimeout=200
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# Set txchainmask and rxchainmask
|
||||
# These parameters are used only if gEnable2x2 is 0
|
||||
# Valid values are 1,2
|
||||
# Set gSetTxChainmask1x1=1 or gSetRxChainmask1x1=1 to select chain0.
|
||||
# Set gSetTxChainmask1x1=2 or gSetRxChainmask1x1=2 to select chain1.
|
||||
gSetTxChainmask1x1=1
|
||||
gSetRxChainmask1x1=1
|
||||
|
||||
# Scan Timing Parameters
|
||||
# gPassiveMaxChannelTime=110
|
||||
#ifdef VENDOR_EDIT
|
||||
gActiveMaxChannelTime=60
|
||||
gActiveMinChannelTime=40
|
||||
#else
|
||||
#gActiveMaxChannelTime=40
|
||||
#gActiveMinChannelTime=20
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
#If set to 0, MCC is not allowed.
|
||||
gEnableMCCMode=1
|
||||
|
||||
# MCC to SCC Switch mode:
|
||||
# 0-Disable
|
||||
# 1-Enable
|
||||
# 2-Force SCC if same band, with SAP restart
|
||||
# 3-Force SCC if same band, without SAP restart by sending (E)CSA
|
||||
# 4-Force SCC if same band (or) use SAP mandatory channel for DBS,
|
||||
# without SAP restart by sending (E)CSA
|
||||
gWlanMccToSccSwitchMode = 3
|
||||
|
||||
# 1=enable STBC; 0=disable STBC
|
||||
gEnableRXSTBC=1
|
||||
|
||||
# 1=enable tx STBC; 0=disable
|
||||
gEnableTXSTBC=1
|
||||
|
||||
# 1=enable rx LDPC; 0=disable
|
||||
gEnableRXLDPC=1
|
||||
|
||||
#Enable/Disable Tx beamforming
|
||||
gTxBFEnable=1
|
||||
|
||||
#Enable/Disable Tx beamformee in SAP mode
|
||||
gEnableTxBFeeSAP=1
|
||||
|
||||
# Enable Tx beamforming in VHT20MHz
|
||||
# Valid values are 0,1. If commented out, the default value is 0.
|
||||
# 0=disable, 1=enable
|
||||
gEnableTxBFin20MHz=1
|
||||
|
||||
#Enable/Disable SU Tx beamformer support
|
||||
#gEnableTxSUBeamformer=1
|
||||
|
||||
gEnableFastRoamInConcurrency=1
|
||||
|
||||
# 802.11K support
|
||||
gRrmEnable=1
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
#Enable Power Save offload
|
||||
#gEnablePowerSaveOffload=1
|
||||
#else
|
||||
#gEnablePowerSaveOffload=2
|
||||
|
||||
#Enable firmware uart print
|
||||
gEnablefwprint=0
|
||||
#endif VENDOR_EDIT
|
||||
|
||||
# Firmware log mode
|
||||
# Valid values are 0,1,2
|
||||
# 0=Disable, 1=WMI, 2=DIAG
|
||||
gEnablefwlog=1
|
||||
|
||||
# Maximum Receive AMPDU size (VHT only. Valid values:
|
||||
# 0->8k 1->16k 2->32k 3->64k 4->128k)
|
||||
gVhtAmpduLenExponent=7
|
||||
|
||||
# Maximum MPDU length (VHT only. Valid values:
|
||||
# 0->3895 octets, 1->7991 octets, 2->11454 octets)
|
||||
gVhtMpduLen=2
|
||||
|
||||
# WOW Enable/Disable.
|
||||
# 0 - Disable both magic pattern match and pattern byte match.
|
||||
# 1 - Enable magic pattern match on all interfaces.
|
||||
# 2 - Enable pattern byte match on all interfaces.
|
||||
# 3 - Enable both magic pattern and pattern byte match on all interfaces.
|
||||
# Default value of gEnableWoW is 3.
|
||||
# gEnableWoW=0
|
||||
|
||||
# Enable or Disable MCC Adaptive Scheduler at the FW
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMCCAdaptiveScheduler=1
|
||||
|
||||
#Enable or Disable p2p device address administered
|
||||
isP2pDeviceAddrAdministrated=0
|
||||
|
||||
# Set Thermal Power limit
|
||||
TxPower2g=10
|
||||
TxPower5g=10
|
||||
|
||||
# Remove Overlap channel restriction
|
||||
gEnableOverLapCh=0
|
||||
|
||||
#Enable VHT on 2.4Ghz
|
||||
gEnableVhtFor24GHzBand=1
|
||||
|
||||
#Maximum number of offload peers supported
|
||||
# gMaxOffloadPeers=2
|
||||
|
||||
# controlling the following offload patterns
|
||||
# through ini parameter. Default value is 1
|
||||
# to disable set it to zero. ssdp = 0
|
||||
# Setup multicast pattern for mDNS 224.0.0.251,
|
||||
# SSDP 239.255.255.250 and LLMNR 224.0.0.252
|
||||
ssdp=0
|
||||
|
||||
#Enable Memory Deep Sleep
|
||||
gEnableMemDeepSleep=1
|
||||
|
||||
# RA filtering rate limit param, the current value would not
|
||||
# help if the lifetime in RA is less than 3*60=3min. Then
|
||||
# we need to change it, though it is uncommon.
|
||||
# gRAFilterEnable=0
|
||||
gRArateLimitInterval=600
|
||||
|
||||
# Maximum number of concurrent connections
|
||||
gMaxConcurrentActiveSessions=3
|
||||
|
||||
# Disable/Enable GreenAP
|
||||
# 0 to disable, 1 to enable, default: 1
|
||||
gEnableGreenAp=0
|
||||
|
||||
#gPNOScanSupport=1
|
||||
|
||||
#Enable/Disable LPASS support
|
||||
# 0 to disable, 1 to enable
|
||||
gEnableLpassSupport=1
|
||||
|
||||
# Whether userspace country code setting shld have priority
|
||||
gCountryCodePriority=1
|
||||
|
||||
# Enable(1)/Disable(0) SIFS burst
|
||||
#ifdef VENDOR_EDIT
|
||||
#Min: 0 disabled
|
||||
#Max: 3 enabled802.11g
|
||||
#Default: 1 enabled, but disabled for legacy mode
|
||||
gEnableSifsBurst=3
|
||||
#else
|
||||
# gEnableSifsBurst=1
|
||||
# endif /* VENDOR_EDIT */
|
||||
|
||||
# Enable or Disable Multi-user MIMO
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMuBformee=1
|
||||
|
||||
# Inactivity time (in ms) to end TX Service Period while in IBSS power save mode
|
||||
gIbssTxSpEndInactivityTime=10
|
||||
|
||||
# Enable support for TDLS
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSSupport=1
|
||||
|
||||
# Enable support for Implicit Trigger of TDLS. That is, wlan driver shall
|
||||
# initiate TDLS Discovery towards a peer whenever setup criteria (throughput
|
||||
# and RSSI) is met and then will initiate teardown when teardown criteria
|
||||
# (idle packet count and RSSI) is met.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
gEnableTDLSImplicitTrigger=1
|
||||
|
||||
# Enable TDLS External Control. That is, user space application has to
|
||||
# first configure a peer MAC in wlan driver towards which TDLS is desired.
|
||||
# Device will establish TDLS only towards those configured peers whenever
|
||||
# TDLS criteria (throughput and RSSI threshold) is met and teardown TDLS
|
||||
# when teardown criteria (idle packet count and RSSI) is met. However,
|
||||
# device will accept TDLS connection if it is initiated from any other peer,
|
||||
# even if that peer is not configured.
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# For TDLS External Control, Implicit Trigger must also be enabled.
|
||||
gTDLSExternalControl=1
|
||||
|
||||
# Enable support for TDLS off-channel operation
|
||||
# 0 - disable
|
||||
# 1 - enable
|
||||
# TDLS off-channel operation will be invoked when there is only one
|
||||
# TDLS connection.
|
||||
gEnableTDLSOffChannel=1
|
||||
|
||||
# Enable or Disable Random MAC (Spoofing)
|
||||
# 1=Enable (default), 0=Disable
|
||||
gEnableMacAddrSpoof=1
|
||||
|
||||
################ Datapath feature set Begin ################
|
||||
# Bus bandwidth threshold values in terms of number of packets
|
||||
gBusBandwidthHighThreshold=2000
|
||||
gBusBandwidthMediumThreshold=500
|
||||
gBusBandwidthLowThreshold=150
|
||||
|
||||
# Bus bandwidth compute timeout value in ms
|
||||
gBusBandwidthComputeInterval=100
|
||||
|
||||
# VHT Tx/Rx MCS values
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gVhtRxMCS=2
|
||||
gVhtTxMCS=2
|
||||
|
||||
# VHT Tx/Rx MCS values for 2x2
|
||||
# Valid values are 0,1,2. If commented out, the default value is 0.
|
||||
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
|
||||
gEnable2x2=1
|
||||
gVhtRxMCS2x2=2
|
||||
gVhtTxMCS2x2=2
|
||||
|
||||
#IPA config is a bit mask and following are the configurations.
|
||||
#bit0 IPA Enable
|
||||
#bit1 IPA PRE Filter enable
|
||||
#bit2 IPv6 enable
|
||||
#bit3 IPA Resource Manager (RM) enable
|
||||
#bit4 IPA Clock scaling enable
|
||||
#bit5 IPA uC ENABLE
|
||||
#bit6 IPA uC STA ENABLE
|
||||
#bit8 IPA Real Time Debugging
|
||||
gIPAConfig=0x7d
|
||||
gIPADescSize=800
|
||||
|
||||
# Enable/Disable RX full reorder offload
|
||||
gReorderOffloadSupported=1
|
||||
|
||||
# Enable CE classification
|
||||
# 1 - enable(default) 0 - disable
|
||||
gCEClassifyEnable=1
|
||||
|
||||
# Enable Rx handling options
|
||||
# Rx_thread=1 RPS=2(default for ROME) NAPI=4(default for ihelium)
|
||||
# DP_RX_THREAD=16 (1 << 4)
|
||||
# 20 = (DP_RX_THREAD | NAPI)
|
||||
rx_mode=20
|
||||
|
||||
# Enable(Tx) fastpath for data traffic.
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableFastPath=1
|
||||
|
||||
# This flag enables IP, TCP and UDP checksum offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
gEnableIpTcpUdpChecksumOffload=1
|
||||
|
||||
# Enable TCP Segmentation Offload
|
||||
# 1 - enable 0 - disable
|
||||
TSOEnable=1
|
||||
|
||||
# Enable Generic Receive Offload
|
||||
# 1 - enable(default) 0 - disable
|
||||
GROEnable=1
|
||||
|
||||
# Enable HT MPDU Density
|
||||
# 4 for 2 micro sec
|
||||
ght_mpdu_density=4
|
||||
|
||||
# Enable flow steering to enable multiple CEs for Rx flows.
|
||||
# Multiple Rx CEs<==>Multiple Rx IRQs<==>probably different CPUs.
|
||||
# Parallel Rx paths.
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableFlowSteering=1
|
||||
|
||||
# Time in microseconds after which a NAPI poll must yield
|
||||
ce_service_max_yield_time=500
|
||||
|
||||
#Maximum number of HTT messages to be processed per NAPI poll
|
||||
ce_service_max_rx_ind_flush=1
|
||||
|
||||
# Maximum number of MSDUs the firmware will pack in one HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND
|
||||
maxMSDUsPerRxInd=8
|
||||
|
||||
# Enable NUD tracking feature
|
||||
# 1 - enable 0 - disable(default)
|
||||
#ifndef VENDOR_EDIT
|
||||
# richy.li@Connectivity, 2019/10/11, [Q porting] align the vowifi behavior with 18811.
|
||||
#gEnableNUDTracking=1
|
||||
#else
|
||||
gEnableNUDTracking=0
|
||||
#endif /* VENDOR_EDIT */
|
||||
################ Datapath feature set End ################
|
||||
|
||||
################ NAN feature set start ###################
|
||||
|
||||
# Enable NAN discovery (NAN 1.0)
|
||||
# 1 - enable 0 - disable(default)
|
||||
gEnableNanSupport=1
|
||||
# Enable NAN Datapath
|
||||
genable_nan_datapath=1
|
||||
|
||||
################ NAN feature set end #####################
|
||||
|
||||
#ifdef VENDOR_EDIT
|
||||
adaptive_dwell_mode_enabled=0
|
||||
#else
|
||||
#adaptive_dwell_mode_enabled=1
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
hostscan_adaptive_dwell_mode=1
|
||||
|
||||
adapt_dwell_lpf_weight=80
|
||||
|
||||
adapt_dwell_wifi_act_threshold=10
|
||||
|
||||
MAWCEnabled=0
|
||||
|
||||
drop_bcn_on_chan_mismatch=0
|
||||
|
||||
# Enable/Disable rtt sta mac randomization
|
||||
enable_rtt_mac_randomization=1
|
||||
|
||||
#Enable/Disable SNR monitoring
|
||||
gEnableSNRMonitoring=1
|
||||
|
||||
# HTC Credit count for WMI operation
|
||||
# 1 to serialize the WMI commands
|
||||
# 0 default works with FW advertised credits, 2 credits usually
|
||||
gWmiCreditCount=1
|
||||
|
||||
# Enable enhanced ACS
|
||||
acs_with_more_param=1
|
||||
# bits 0-3: rssi weight
|
||||
# bits 4-7: bss count weight
|
||||
# bits 8-11: noise floor weight
|
||||
# bits 12-15: channel free weight
|
||||
# bits 16-19: tx power range weight
|
||||
# bits 20-23: tx power throughput weight
|
||||
# bits 24-31: reserved
|
||||
AutoChannelSelectWeight=0x00fafafa
|
||||
|
||||
# Enable/Disable broadcast TWT
|
||||
bcast_twt=1
|
||||
|
||||
# Enable Runtime PM
|
||||
gRuntimePM=1
|
||||
|
||||
# Enable broadcast logging to the userspace entities
|
||||
gMulticastHostFwMsgs=1
|
||||
# Disable packetlog explicitly
|
||||
#ifndef VENDOR_EDIT
|
||||
#gEnablePacketLog=0
|
||||
#else
|
||||
global_adapt_dwelltime_mode=1
|
||||
roamscan_adaptive_dwell_mode=1
|
||||
extscan_adaptive_dwell_mode=1
|
||||
pnoscan_adaptive_dwell_mode=1
|
||||
active_max_channel_time_2g=60
|
||||
gcmp_enabled=0
|
||||
gEnablePacketLog=1
|
||||
#endif /* VENDOR_EDIT */
|
||||
|
||||
# Set IPA bandwidth levels in mbps
|
||||
gIPALowBandwidthMbps=100
|
||||
gIPAMediumBandwidthMbps=400
|
||||
gIPAHighBandwidthMbps=800
|
||||
spectral_disable=1
|
||||
|
||||
END
|
||||
|
||||
# Note: Configuration parser would not read anything past the END marker
|
||||
|
||||
6
wifi/wpa_supplicant_overlay.conf
Normal file
6
wifi/wpa_supplicant_overlay.conf
Normal file
|
|
@ -0,0 +1,6 @@
|
|||
disable_scan_offload=1
|
||||
p2p_disabled=1
|
||||
tdls_external_control=1
|
||||
wowlan_triggers=magic_pkt
|
||||
bss_max_count=400
|
||||
interworking=1
|
||||
Loading…
Reference in a new issue