ARM: dts: msm: Add dtsi entry for ssg hlos drivers

The following changes are added:
1. Add qseecom node for msmnile
2. Enable QRNG driver for msmnile.
3. Add shmbridge node for msmnile.
4. Add smcinvoke node for msmnile.
5. Add tz_log node for msmnile.

Change-Id: I7573b3acead185dd0100f9862c2348ab25c2cf76
This commit is contained in:
Santosh Dronamraju 2020-09-10 22:08:27 +05:30
commit 7b224db0db

View file

@ -329,8 +329,10 @@
qseecom_mem: qseecom_region {
compatible = "shared-dma-pool";
no-map;
reg = <0x0 0x9e400000 0x0 0x1400000>;
alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
reusable;
alignment = <0x0 0x400000>;
size = <0x0 0x1400000>;
};
cdsp_sec_mem: cdsp_sec_regions {
@ -2366,6 +2368,51 @@
qcom,dump-id = <0x127>;
};
};
qtee_shmbridge {
compatible = "qcom,tee-shared-memory-bridge";
};
qcom_qseecom: qseecom@87900000 {
compatible = "qcom,qseecom";
reg = <0x87900000 0x2200000>;
reg-names = "secapp-region";
memory-region = <&qseecom_mem>;
qcom,hlos-num-ce-hw-instances = <1>;
qcom,hlos-ce-hw-instance = <0>;
qcom,qsee-ce-hw-instance = <0>;
qcom,disk-encrypt-pipe-pair = <2>;
qcom,support-fde;
qcom,no-clock-support;
qcom,fde-key-size;
qcom,appsbl-qseecom-support;
qcom,commonlib64-loaded-by-uefi;
qcom,qsee-reentrancy-support = <2>;
};
qcom_rng: qrng@793000 {
compatible = "qcom,msm-rng";
reg = <0x793000 0x1000>;
qcom,no-qrng-config;
interconnect-names = "data_path";
interconnects = <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_PRNG>;
clock-names = "km_clk_src";
clocks = <&gcc GCC_PRNG_AHB_CLK>;
};
qcom_smcinvoke: smcinvoke@87900000 {
compatible = "qcom,smcinvoke";
reg = <0x87900000 0x2200000>;
reg-names = "secapp-region";
};
qcom_tzlog: tz-log@146bf720 {
compatible = "qcom,tz-log";
reg = <0x146bf720 0x3000>;
qcom,hyplog-enabled;
hyplog-address-offset = <0x410>;
hyplog-size-offset = <0x414>;
};
};
&firmware {