A-Team_Digital_Solutions/android_kernel_motorola_sm6375
Watch
2
0
Fork
You've already forked android_kernel_motorola_sm6375
 0
mirror of https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git synced 2026-10-25 22:23:14 -04:00
Code Issues Projects Releases Packages Wiki Activity

dts:fogor:set audio dts

Browse source 
fogo use wcd9370+fs1815
4375 platform.
set related dts.

Change-Id: I194d07b92136f7ceb54a9f9a9d0fd40c1e391bd6
Signed-off-by: liaohj <liaohj@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2639583
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
This commit is contained in:
liaohj 2023-06-09 17:36:02 +08:00 • committed by panyq6
commit 805825a57b
2 changed files with 45 additions and 56 deletions
Download patch file Download diff file Expand all files Collapse all files

40
qcom/fogor-sensors.dtsi
View file

@ -37,31 +37,6 @@
bias-no-pull;
};
};
sar_int_fogor_default: sar_int_fogor_default {
mux {
pins = "gpio58";
function = "gpio";
};
config {
pins = "gpio58";
num-grp-pins = <1>;
drive-strength = <2>;
bias-pull-up;
};
};
sar_int_fogor_sleep: sar_int_fogor_sleep {
mux {
pins = "gpio58";
function = "gpio";
};
config {
pins = "gpio58";
num-grp-pins = <1>;
drive-strength = <2>;
bias-pull-up;
};
};
};
&soc {
@ -75,19 +50,12 @@
};
&qupv3_se8_i2c {
status = "okay";
status = "disabled";
Semtech_sx937x@2c {
compatible = "Semtech,sx937x";
reg = <0x2c>;
Semtech,power-supply-type = <1>;
cap_vdd-supply = <&L12A>;
pinctrl-names = "default","sleep";
pinctrl-0 = <&sar_int_fogor_default>;
pinctrl-1 = <&sar_int_fogor_sleep>;
interrupt-parent = <&tlmm>;
interrupts = <58 0x02>;
interrupt-names = "sx937x_irq";
Semtech,nirq-gpio = <&tlmm 58 0x02>;
/*use PH5/6 as the reference sensor
set it to 0xff if the ref-phases-x is not used*/
Semtech,ref-phases-a = <5>;
@ -171,10 +139,6 @@
reg = < 0x12 >;
//aw_sar,regulator-power-supply = <1>;
sar-num = < 0 >;
interrupt-parent = < &tlmm >;
interrupts = <58 0x02>;
interrupt-names = "awinic_irq";
irq-gpio = <&tlmm 58 0x02>;
//vcc0-supply = <&L12A>;
channel_use_flag = <0x1f>;
aw_sar,use_plug_cail;
@ -182,7 +146,7 @@
/* private node belongs to aw963xx */
start-mode = < 1 >; // 0: start in rom 1: start in ram
irq-mux = < 2 >; // set csx as irq pin. config this field when connect to aw96308/aw96310
status = "okay";
status = "disabled";
};
};

61
qcom/holi-audio-fogor-overlay.dtsi
View file

@ -4,6 +4,33 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/gpio/gpio.h>
&tlmm{
fsm_rcv_rst: fsm_rcv_rst {
mux {
pins = "gpio86";
function = "gpio";
};
config {
pins = "gpio86";
drive-strength = <2>; /* 2 MA */
bias-pull-down;
output-low;
};
};
fsm_spk_rst: fsm_spk_rst {
mux {
pins = "gpio58";
function = "gpio";
};
config {
pins = "gpio58";
drive-strength = <2>; /* 2 MA */
bias-pull-down;
output-low;
};
};
};
&cdc_dmic01_gpios {
status = "disabled";
};
@ -220,7 +247,7 @@
};
&holi_snd {
qcom,model = "holi-9370_aw87xxx-snd-card";
qcom,model = "holi-9370_fs1815-snd-card";
qcom,wcn-btfm = <1>;
qcom,tdm-max-slots = <4>;
qcom,mi2s-audio-intf = <0>;
@ -276,25 +303,23 @@
qcom,msm-mbhc-hs-mic-min-threshold-mv = <116>;
};
&qupv3_se8_i2c {
&qupv3_se10_i2c {
status = "ok"
aw887xx_smartpa_0: aw87xxx_pa@58 {
compatible = "awinic,aw87xxx_pa";
reg = <0x58>;
dev_index = < 0 >;
esd-enable = "true";
aw-rx-topo-id = <0x1000ff00>;
aw-rx-port-id = <0xB030>;
status = "okay";
fs1815_rcv: fs1815_rcv@34{
compatible = "foursemi,fs1815";
reg = <0x34>;
pinctrl-names = "default";
pinctrl-0 = <&fsm_rcv_rst>;
fsm,rst-gpio = <&tlmm 86 0x00>;
status = "okay";
};
aw887xx_smartpa_1: aw87xxx_pa@59 {
compatible = "awinic,aw87xxx_pa";
reg = <0x59>;
dev_index = < 1 >;
esd-enable = "true";
aw-rx-topo-id = <0x1000ff00>;
aw-rx-port-id = <0xB030>;
status = "okay";
fs1815_spk: fs1815_spk@35{
compatible = "foursemi,fs1815";
reg = <0x35>;
pinctrl-names = "default";
pinctrl-0 = <&fsm_spk_rst>;
fsm,rst-gpio = <&tlmm 58 0x00>;
status = "okay";
};
};