A-Team_Digital_Solutions/android_kernel_motorola_sm6375
Watch
2
0
Fork
You've already forked android_kernel_motorola_sm6375
 0
mirror of https://github.com/BobTheBlinker/android_kernel_motorola_sm6375.git synced 2026-10-09 13:49:24 -04:00
Code Issues Projects Releases Packages Wiki Activity

ARM: dts: msm: add PM7250B and SMB1394 to sdxlemur-mtp-mbb-emmc boards

Browse source 
sdxlemur-mtp-mbb-emmc boards use PM7250B and SMB1394 similar to
sdxlemur-mtp-mbb boards. However, sdxlemur-mtp-mbb-emmc.dtsi has
sdxlemur-pmic-overlay.dtsi which only adds PMK8350 and PMX65.

Add pm7250b.dtsi and smb1394.dtsi to sdxlemur-mtp-mbb-emmc.dtsi
so that sdxlemur-mtp-mbb-emmc boards can now use USB VBUS
detection from PM7250B charger peripheral instead of VBUS_DET
peripheral from PMX65.

Change-Id: I72a63eb3f6b3f2b8c779e40593da9b7499a69478
This commit is contained in:
Subbaraman Narayanamurthy 2021-05-27 19:48:03 -07:00
commit 90fbdd101e
1 changed files with 316 additions and 1 deletions
Download patch file Download diff file Expand all files Collapse all files

317
qcom/sdxlemur-mtp-mbb-emmc.dtsi
View file

@ -1,7 +1,13 @@
#include "sdxlemur-pmic-overlay.dtsi"
#include "pm7250b.dtsi"
#include <dt-bindings/iio/qti_power_supply_iio.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
&soc {
mbb_batterydata: qcom,battery-data {
qcom,batt-id-range-pct = <15>;
#include "qg-batterydata-alium-3600mah.dtsi"
};
};
&sdhc_1 {
@ -34,3 +40,312 @@
status = "ok"
};
&spmi_debug_bus {
qcom,pm7250b-debug@2 {
compatible = "qcom,spmi-pmic";
reg = <2 SPMI_USID>;
#address-cells = <2>;
#size-cells = <0>;
qcom,can-sleep;
};
};
&pm7250b_clkdiv {
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
};
&pm7250b_vadc {
charger_skin_therm {
reg = <ADC5_AMUX_THM1_100K_PU>;
label = "charger_skin_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
conn_therm {
reg = <ADC5_AMUX_THM3_100K_PU>;
label = "conn_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
smb1390_therm@e {
qcom,scale-fn-type = <ADC_SCALE_HW_CALIB_PM5_SMB1398_TEMP>;
};
};
&pm7250b_adc_tm {
io-channels = <&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>,
<&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>;
charger_skin_therm {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
conn_therm {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&thermal_zones {
chg-skin-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM1_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
conn-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pm7250b_adc_tm ADC5_AMUX_THM3_100K_PU>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
active-config1 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
&pm7250b_charger {
#io-channel-cells = <1>;
io-channels = <&pm7250b_vadc ADC5_USB_IN_V_16>,
<&pm7250b_vadc ADC5_USB_IN_I>,
<&pm7250b_vadc ADC5_CHG_TEMP>,
<&pm7250b_vadc ADC5_DIE_TEMP>,
<&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>,
<&pm7250b_vadc ADC5_SBUx>,
<&pm7250b_vadc ADC5_VPH_PWR>,
<&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>,
<&pm7250b_qg PSY_IIO_RESISTANCE_ID>,
<&pm7250b_qg PSY_IIO_VOLTAGE_NOW>,
<&pm7250b_qg PSY_IIO_TEMP>,
<&pm7250b_qg PSY_IIO_CAPACITY>,
<&pm7250b_qg PSY_IIO_VOLTAGE_OCV>,
<&pm7250b_qg PSY_IIO_VOLTAGE_AVG>,
<&pm7250b_qg PSY_IIO_DEBUG_BATTERY>,
<&pm7250b_qg PSY_IIO_REAL_CAPACITY>,
<&pm7250b_qg PSY_IIO_CC_SOC>,
<&pm7250b_qg PSY_IIO_CURRENT_NOW>,
<&pm7250b_qg PSY_IIO_VOLTAGE_MAX>,
<&pm7250b_qg PSY_IIO_CHARGE_FULL>,
<&pm7250b_qg PSY_IIO_CHARGE_COUNTER>,
<&pm7250b_qg PSY_IIO_CYCLE_COUNT>,
<&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>,
<&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>,
<&smb1394_div2_cp_primary PSY_IIO_PARALLEL_MODE>,
<&smb1394_div2_cp_primary PSY_IIO_PARALLEL_OUTPUT_MODE>,
<&smb1394_div2_cp_primary PSY_IIO_MIN_ICL>,
<&smb1394_div2_cp_primary PSY_IIO_CP_SWITCHER_EN>,
<&smb1394_div2_cp_primary PSY_IIO_CP_ENABLE>,
<&smb1394_div2_cp_primary PSY_IIO_CP_ILIM>,
<&smb1394_div2_cp_primary PSY_IIO_CP_DIE_TEMP>;
io-channel-names = "usb_in_voltage",
"usb_in_current",
"chg_temp",
"die_temp",
"conn_temp",
"sbux_res",
"vph_voltage",
"skin_temp",
"resistance_id",
"voltage_now",
"temp",
"capacity",
"voltage_ocv",
"voltage_avg",
"debug_battery",
"real_capacity",
"cc_soc",
"current_now",
"voltage_max",
"charge_full",
"charge_counter",
"cycle_count",
"charge_full_design",
"time_to_full_now",
"cp_parallel_mode",
"cp_parallel_output_mode",
"cp_min_icl",
"cp_switcher_en",
"cp_enable",
"cp_ilim",
"cp_die_temp";
qcom,battery-data = <&mbb_batterydata>;
qcom,sec-charger-config = <1>;
qcom,auto-recharge-soc = <98>;
qcom,step-charging-enable;
qcom,sw-jeita-enable;
qcom,charger-temp-max = <800>;
qcom,smb-temp-max = <800>;
qcom,suspend-input-on-debug-batt;
qcom,fcc-stepping-enable;
qcom,fcc-step-delay-ms = <100>;
qcom,fcc-step-size-ua = <100000>;
qcom,thermal-mitigation = <3600000 3000000 1500000 1000000 500000>;
qcom,smb-internal-pull-kohm = <0>;
qcom,en-skin-therm-mitigation;
qcom,hvdcp3-standalone-config;
dpdm-supply = <&usb2_phy>;
smb5_vbus: qcom,smb5-vbus {
regulator-name = "smb5-vbus";
};
smb5_vconn: qcom,smb5-vconn {
regulator-name = "smb5-vconn";
};
};
&pm7250b_qg {
#io-channel-cells = <1>;
io-channels = <&pm7250b_vadc ADC5_BAT_THERM_100K_PU>,
<&pm7250b_vadc ADC5_BAT_ID_100K_PU>,
<&pm7250b_charger PSY_IIO_INPUT_CURRENT_LIMITED>,
<&pm7250b_charger PSY_IIO_RECHARGE_SOC>,
<&pm7250b_charger PSY_IIO_FORCE_RECHARGE>,
<&pm7250b_charger PSY_IIO_CHARGE_DONE>,
<&smb1394_div2_cp_primary PSY_IIO_CP_ENABLE>;
io-channel-names = "batt-therm",
"batt-id",
"input_current_limited",
"recharge_soc",
"force_recharge",
"charge_done",
"cp_charging_enabled";
qcom,battery-data = <&mbb_batterydata>;
qcom,qg-iterm-ma = <150>;
qcom,hold-soc-while-full;
qcom,linearize-soc;
qcom,cl-feedback-on;
qcom,tcss-enable;
qcom,fvss-enable;
qcom,fvss-vbatt-mv = <3300>;
qcom,bass-enable;
qcom,use-cp-iin-sns;
};
&pm7250b_pdphy {
vdd-pdphy-supply = <&L10B>;
vbus-supply = <&smb5_vbus>;
vconn-supply = <&smb5_vconn>;
#io-channel-cells = <1>;
io-channels = <&pm7250b_charger PSY_IIO_PD_ACTIVE>,
<&pm7250b_charger PSY_IIO_TYPEC_CC_ORIENTATION>,
<&pm7250b_charger PSY_IIO_CONNECTOR_TYPE>,
<&pm7250b_charger PSY_IIO_TYPEC_POWER_ROLE>,
<&pm7250b_charger PSY_IIO_PD_USB_SUSPEND_SUPPORTED>,
<&pm7250b_charger PSY_IIO_TYPEC_SRC_RP>,
<&pm7250b_charger PSY_IIO_PD_IN_HARD_RESET>,
<&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>,
<&pm7250b_charger PSY_IIO_PR_SWAP>,
<&pm7250b_charger PSY_IIO_PD_VOLTAGE_MIN>,
<&pm7250b_charger PSY_IIO_PD_VOLTAGE_MAX>,
<&pm7250b_charger PSY_IIO_USB_REAL_TYPE>,
<&pm7250b_charger PSY_IIO_TYPEC_MODE>,
<&pm7250b_charger PSY_IIO_PE_START>;
io-channel-names = "pd_active",
"typec_cc_orientation",
"connector_type",
"typec_power_role",
"pd_usb_suspend_supported",
"typec_src_rp",
"pd_in_hard_reset",
"pr_current_max",
"pr_swap",
"pd_voltage_min",
"pd_voltage_max",
"real_type",
"typec_mode",
"pe_start";
};
&pm7250b_gpios {
smb_stat {
smb_stat_default: smb_stat_default {
pins = "gpio6";
function = "normal";
input-enable;
bias-pull-up;
qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
power-source = <0>;
};
};
};
&i2c_3 {
status = "ok"
#include "smb1394.dtsi"
};
&smb1394 {
interrupts = <0x2 0xc5 0x0 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&spmi_bus>;
interrupt-names = "smb1394";
pinctrl-names = "default";
pinctrl-0 = <&smb_stat_default>;
status = "ok"
};
&smb1394_div2_cp_primary {
io-channels = <&pm7250b_vadc ADC5_AMUX_THM2>,
<&pm7250b_charger PSY_IIO_USB_REAL_TYPE>,
<&pm7250b_charger PSY_IIO_ADAPTER_CC_MODE>,
<&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>,
<&pm7250b_charger PSY_IIO_USB_INPUT_CURRENT_SETTLED>,
<&pm7250b_charger PSY_IIO_SMB_EN_MODE>,
<&pm7250b_charger PSY_IIO_SMB_EN_REASON>;
io-channel-names = "die_temp",
"real_type",
"adapter_cc_mode",
"pd_current_max",
"input_current_settled",
"smb_en_mode",
"smb_en_reason";
qcom,parallel-input-mode = <1>; /* USBIN */
qcom,parallel-output-mode = <2>; /* VBAT */
status = "ok"
};
&usb {
extcon = <&pm7250b_pdphy>, <&eud>;
#io-channel-cells = <1>;
io-channels= <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>;
io-channel-names = "chg_type";
};
&vbus_detect {
status = "disabled";
};