Merge "ARM: dts: msm: add gpio pins/address used for BOE cmd panel"

bindings/mdss-dsi-panel.txt

@@ -578,6 +578,11 @@ Optional properties:
 					to identify the default topology for the
 					display. The first set is indexed by the
 					value 0.
+- qcom,dsi-panel-gpio-address:		An u32 pair consisting of base address of the
+					TLMM register space and size of each GPIO pin.
+- qcom,dsi-panel-gpio-pins:		An u32 array consisting of all the GPIO pins used
+					for driving the DSI host and the panels
+					connected to the host.
 - qcom,mdss-dsi-ext-bridge-mode:	External bridge chip is connected instead of panel.
 - qcom,mdss-dsi-dma-schedule-line:	An integer value indicates the line number after vertical active
 					region for video mode panels and line number after TE for command mode
@@ -759,6 +764,10 @@ Example:
 		qcom,mdss-dsi-force-clock-lane-hs;
 		qcom,compression-mode = "dsc";
 		qcom,adjust-timer-wakeup-ms = <1>;
+
+		qcom,dsi-panel-gpio-address = <0x0F100000 0x1000>;
+		qcom,dsi-panel-gpio-pins = <12 24 82>;
+
 		qcom,mdss-dsi-display-timings {
 			wqhd {
 				qcom,mdss-dsi-cmd-mode;

bindings/sde.txt

@@ -531,6 +531,8 @@ Optional properties:
 				should be excluded from IO memory validation list
 				in trusted vm environment
 - qcom,vram-size: 		A u32 value indicating the size of the VRAM in bytes
+- qcom,pmic-arb-address:	A u32 array of display related SPMI address
+				bit mask, which is a combination of SID and  pheripheral id's.
 
 Bus Scaling:
 - interconnects                 An array of 4 cell properties with the format of
@@ -812,6 +814,7 @@ Example:
     qcom,sde-secure-sid-mask = <0x200801 0x200c01>;
 
     qcom,vram-size = <0x200000>;
+    qcom,pmic-arb-address = <0x3F800 0x3F900 0x3FA00>;
 
     qcom,sde-vbif-qos-rt-remap = <3 3 4 4 5 5 6 6>;
     qcom,sde-vbif-qos-nrt-remap = <3 3 3 3 3 3 3 3>;

display/lahaina-sde-common.dtsi

@@ -228,6 +228,10 @@
 
 		qcom,sde-secure-sid-mask = <0x4000821>;
 
+		/* SPMI address related to display */
+		qcom,pmic-arb = <&spmi_bus>;
+		qcom,pmic-arb-address = <0x3F800 0x3F900 0x3FA00>;
+
 		qcom,sde-reg-bus,vectors-KBps = <0 0>,
 				<0 74000>,
 				<0 148000>,

display/lahaina-sde-display-common.dtsi

@@ -124,6 +124,9 @@
 	qcom,dsi-dyn-clk-enable;
 	qcom,dsi-dyn-clk-list = <606979440 604450359 601921278>;
 
+	qcom,dsi-panel-gpio-address = <0x0F100000 0x1000>;
+	qcom,dsi-panel-gpio-pins = <12 24 82>;
+
 	qcom,mdss-dsi-display-timings {
 		timing@0 {
 			qcom,mdss-dsi-panel-phy-timings = [00 14 05 05 13 13 05