Merge "ARM: dts: msm: Add support for dual display on shima"

This commit is contained in:
qctecmdr 2020-10-01 22:13:22 -07:00 • committed by Gerrit - the friendly Code Review server
commit ebc2e85151
4 changed files with 13 additions and 0 deletions

View file

@ -14,6 +14,9 @@
qcom,dsi-ctrl-num = <0>;
qcom,dsi-phy-num = <0>;
qcom,dsi-sec-ctrl-num = <1>;
qcom,dsi-sec-phy-num = <1>;
qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";
qcom,mdss-dsi-lane-map = "lane_map_0123";
qcom,mdss-dsi-bllp-eof-power-mode;

View file

@ -6,6 +6,8 @@
qcom,mdss-dsi-panel-physical-type = "oled";
qcom,dsi-ctrl-num = <0>;
qcom,dsi-phy-num = <0>;
qcom,dsi-sec-ctrl-num = <1>;
qcom,dsi-sec-phy-num = <1>;
qcom,mdss-dsi-virtual-channel-id = <0>;
qcom,mdss-dsi-stream = <0>;
qcom,mdss-dsi-bpp = <24>;

View file

@ -97,6 +97,7 @@
&dsi_r66451_amoled_60hz_video {
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
qcom,dsi-select-sec-clocks = "mux_byte_clk1", "mux_pixel_clk1";
qcom,mdss-dsi-display-timings {
timing@0 {
qcom,mdss-dsi-panel-phy-timings = [00 10 04 04 12 11 04
@ -109,6 +110,7 @@
&dsi_r66451_amoled_60hz_cmd {
qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
qcom,dsi-select-sec-clocks = "mux_byte_clk1", "mux_pixel_clk1";
qcom,dsi-dyn-clk-enable;
qcom,dsi-dyn-clk-list =
<327096550 325733640 328459448>;

View file

@ -12,23 +12,29 @@
&dsi_r66451_amoled_60hz_video {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,mdss-dsi-sec-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-brightness-max-level = <255>;
qcom,mdss-dsi-bl-inverted-dbv;
qcom,platform-reset-gpio = <&tlmm 24 0>;
qcom,platform-sec-reset-gpio = <&tlmm 25 0>;
};
&dsi_r66451_amoled_60hz_cmd {
qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
qcom,panel-sec-supply-entries = <&dsi_panel_pwr_supply>;
qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,mdss-dsi-sec-bl-pmic-control-type = "bl_ctrl_dcs";
qcom,mdss-dsi-bl-min-level = <1>;
qcom,mdss-dsi-bl-max-level = <4095>;
qcom,mdss-brightness-max-level = <255>;
qcom,mdss-dsi-bl-inverted-dbv;
qcom,platform-te-gpio = <&tlmm 82 0>;
qcom,platform-reset-gpio = <&tlmm 24 0>;
qcom,platform-sec-reset-gpio = <&tlmm 25 0>;
};
&dsi_r66451_amoled_cmd {