- use shorter function names:
z_erofs_pagevec_enqueue and z_erofs_pagevec_dequeue;
- minor code cleanup.
In order to keep in line with erofs-outofstaging patchset.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190731155752.210602-16-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Turn into a module parameter ("use_vmap") as it
can be set at runtime.
Suggested-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190731155752.210602-15-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For historical reasons, __GFP_NOFAIL was set for managed inode.
It's no need using that since EROFS can handle it properly.
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190731155752.210602-13-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
.kill_sb() will do that instead in order to remove duplicated code.
Note that the initialzation of managed_cache is now moved
after s_root is assigned since it's more preferred to iput()
in .put_super() and all inodes should be evicted before
the end of generic_shutdown_super(sb).
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190731155752.210602-12-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Al said, "the only use of sbi->dev_name is debugging
printks and all of those have sb->s_id available, with
device name stored in there. Which makes the whole
thing bloody weird".
sbi->dev_name was used for our debugging use and it's
better to just use s_id in community and delete
the whole erofs_mount_private stuff.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190731155752.210602-11-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_EROFS_FS_IO_MAX_RETRIES seems a runtime setting
and users have no idea about the change in behaviour.
Let's remove the setting currently and could turn it
into a module parameter if it's really needed.
Suggested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190731155752.210602-9-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tidy up relative order of variables / declarations in internal.h,
move some local static functions out into other files and
add tags at the end of #endif acrossing several lines.
No logic change.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190731155752.210602-7-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was used for Linux backward compatibility, and
no use for upstream kernel.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190731155752.210602-6-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main change is to reserve all checksums except for superblock,
since it's more useful to do block-based verity for read-only fs.
Some comments change as well, which is minor.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190731155752.210602-5-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Use the correct style for all SPDX License Identifiers;
- Get rid of the unnecessary license boilerplate;
- Use "GPL-2.0-only" instead of "GPL-2.0" suggested-by Stephen.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190731155752.210602-2-gaoxiang25@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/rtl8723bs/hal/odm.c: In function 'odm_RSSIMonitorCheckCE':
drivers/staging/rtl8723bs/hal/odm.c:1258:7: warning:
variable 'FirstConnect' set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190731140903.304-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/rtl8723bs/core/rtw_cmd.c: In function rtw_cmd_thread:
drivers/staging/rtl8723bs/core/rtw_cmd.c:405:16: warning: variable prspbuf set but not used [-Wunused-but-set-variable]
drivers/staging/rtl8723bs/core/rtw_cmd.c: In function rtw_joinbss_cmd:
drivers/staging/rtl8723bs/core/rtw_cmd.c:771:6: warning: variable auth set but not used [-Wunused-but-set-variable]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190731135953.16784-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In rtl8192_init_priv_variable allocation for priv->pFirmware may fail,
so a null check is necessary.priv->pFirmware is accessed later in
rtl8192_adapter_start. I added the check and made appropriate changes
to propagate the errno to the caller.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190731141925.29268-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/rtl8723bs//hal/odm_CfoTracking.c: In function 'odm_SetCrystalCap':
drivers/staging/rtl8723bs//hal/odm_CfoTracking.c:14:7: warning:
variable 'bEEPROMCheck' set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190801015307.44572-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable rtstatus is being initialized with a value that is never read
and rtstatus is being re-assigned a little later on. The assignment is
redundant and hence can be removed. Also, make rtstatus a bool to
match the function return type.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190731094736.28637-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Realtek RTL8723BS only connects successfully at the very first
time, then it always fails attempting to switch to another AP. No
authentication/association observed from the air capture for each
attempt due to the cfg80211 believes the device is still connected.
Fix this by forcing to indicate the disconnection events during
disconnection so the cfg80211_connect can connect to a different
AP without problem.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Link: https://lore.kernel.org/r/20190731103517.66903-1-chiu@endlessm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 8e7cb7352e.
Bharath writes:
Could you drop this patch from the staging-next tree? This is
because John is making some changes to the put_user_page*()
functions. He has submitted a patch recently removing
put_user_page_dirty() function which is being used in this
patch. This might break the kernel build if John's patch gets
merged in.
I ll submit a patch once the put_user_page*() apis are fixed.
Reported-by: Bharath Vedartham <linux.bhar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-43-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We do not want to offload FDB entries if not added by user as static
entries. Check the added_by_user flag and break if not set.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1564416712-16946-5-git-send-email-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the .ndo_fdb_dump callback for the switch net devices. The
list of all offloaded FDB entries is retrieved through the dpsw_fdb_dump()
firmware call. Filter the entries by the switch port on which the
callback was called and for each of them create a new neighbour message.
Also remove the requirement from the TODO list.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1564416712-16946-4-git-send-email-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Notify switchdev in case the FDB entry was successfully offloaded.
This will help users to make the distinction between entries known to
the HW switch and those that are held only on the software bridge.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1564416712-16946-3-git-send-email-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dpsw_cfg structure is only used when creating a new dpsw DPAA2
object. In the DPAA2 architecture, objects are created at boot time by
the firmware or dynamically from userspace while drivers on the fsl-mc
bus only configure those objects.
Remove the structure since it's of no use.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/1564416712-16946-2-git-send-email-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use if(!x) instead of if(x == NULL).
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20190726180448.2290-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces around '-' and '*' to improve readability and follow kernel
coding style. Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20190726180448.2290-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces around '<<' and '>>' to improve readability and follow
kernel coding style. Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20190726180448.2290-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces around '|' to improve readability and follow kernel
coding style. Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20190726180448.2290-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces around '&' to improve readability and follow kernel
coding style. Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20190726180448.2290-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add spaces around '+' to improve readability and follow kernel
coding style. Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20190726180448.2290-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
manual sleep mode was used to put the wilc1000 chip in sleep while in
disconnected state. This is taken care of in the firmware
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20190725213125.2810-7-adham.abozaeid@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't override powersave state with respect to the open interfaces and
let the firmware take care of when it's appropriate to do so
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20190725213125.2810-5-adham.abozaeid@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
during_ip_timer is not required after removing the code that disables
powersave while the ip is being obtained.
Its handler clear_during_ip is also removed
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20190725213125.2810-3-adham.abozaeid@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver registers an inetaddr notifier to disable powersave while the ip
address is being obtained which should be controlled only by cfg80211.
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Link: https://lore.kernel.org/r/20190725213125.2810-2-adham.abozaeid@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For pages that were retained via get_user_pages*(), release those pages
via the new put_user_page*() routines, instead of via put_page().
This is part a tree-wide conversion, as described in commit fc1d8e7cca
("mm: introduce put_user_page*(), placeholder versions").
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Bharath Vedartham <linux.bhar@gmail.com>
Link: https://lore.kernel.org/r/1564058658-3551-1-git-send-email-linux.bhar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable rtstatus is initialized to a value that is never read and it
is re-assigned later. The initialization is redundant and can be
removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190726124803.11349-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function hal_EfusePgCheckAvailableAddr() contains just a single if
test. Remove the function and replace the call to it with the if test.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20190725170922.16465-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver is related to 'pcd8544'.
However, 2 strings are about pdc8544 (c and d switched)
Fix it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190725183856.17616-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All uses of old GPIO API have been converted to new API.
This item can be removed from TODO file.
Signed-off-by: Jerry Lin <wahahab11@gmail.com>
Link: https://lore.kernel.org/r/20190729023544.GA25930@compute1
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix gcc used-but-set-variable warning:
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c: In function vchiq_release_internal:
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:2827:16: warning:
variable local_entity_uc set but not used [-Wunused-but-set-variable]
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:2827:6: warning:
variable local_uc set but not used [-Wunused-but-set-variable]
Remove the unused variables 'local_entity_uc' and 'local_uc'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20190727013524.33168-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/rtl8723bs//os_dep/osdep_service.c: In function 'rtw_buf_free':
drivers/staging/rtl8723bs//os_dep/osdep_service.c:321:6: warning:
variable 'ori_len' set but not used [-Wunused-but-set-variable]
drivers/staging/rtl8723bs//os_dep/ioctl_linux.c: In function 'rtw_ioctl_wext_private':
drivers/staging/rtl8723bs//os_dep/ioctl_linux.c:4915:6: warning:
variable 'num_priv' set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190726140959.15008-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c: In function phy_BB8723b_Config_ParaFile:
drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c:436:77:
warning: variable pszBBRegMpFile set but not used [-Wunused-but-set-variable]
It is never used so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190726140734.39564-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
