When QCFA binning is enabled adjust MP limit fuse checking
to check actual proessing width for IFE.
CRs-Fixed: 2808086
Change-Id: I22af38ba36ad84372699a177c203c1acbae76cb9
Signed-off-by: Wyes Karny <wkarny@codeaurora.org>
Remove the sof log in CSID irq handler and handle it in the
Bottom half.Sof irq enabled during the sof freeze scenario
and sof log getting printed in the irq handler causing the
interrupt handling taking more time.
CRs-Fixed: 2804588
Change-Id: I9514bf79333665dcd9407932789ce00c4ed480d8
Signed-off-by: Chandan Kumar Jha <cjha@codeaurora.org>
Fixes the null pointer dereference in the print dimension function.
CRs-Fixed: 2809214
Change-Id: I6467f183cca9f665c89f1a418b320cd55be7700a
Signed-off-by: Anand Ravi <ananravi@codeaurora.org>
Tfe sensor diag feature is not enabled properly. Enable
the diag feature based on the debug fs value. Log the
tfe measured sensor diag status for camif and rdi paths.
Enable the tfe diag status with below command
adb shell "echo 0x1 > /sys/kernel/debug/camera_ife/tfe_camif_debug".
CRs-Fixed: 2810952
Change-Id: I47cd57e38a38010fb7fba048c35e907e1980b797
Signed-off-by: Ravikishore Pampana <rpampana@codeaurora.org>
In case of dual, acquire IFEs from a higher to lower idx.
The IFE with the higher hw_idx will be configured as slave.
CRs-Fixed: 2805265
Change-Id: I35e3af84e2ac6586056e6d74373642a85e5c797a
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
If ife bandwidth number of paths configuration is zero then do not
proceed. Number of bandwidth paths should be minimum one and
should not be greater than max value.
CRs-Fixed: 2801769
Change-Id: I2bf5cd4ea76ca7ecd9ca968bced2957a76691001
Signed-off-by: Ayush Kumar <ayushkr@codeaurora.org>
During destroying the session, sof freeze timeout happens
after destroying workqueue. Then sof freeze timeout callback
will access workqueue causing use after free memory issue.
This change invokes destroying timer prior to workqueue.
CRs-Fixed: 2807936
Change-Id: I1f0dcb7a03fbf802f4ec872727e3b627a78f56f8
Signed-off-by: zhuo <zhuo@codeaurora.org>
Fix the callback arguments in IFE to avoid the CFI
check failure. A few callbacks invokes do not typecast for
the last argument of the event callback. Since callbacks
are indirect function call, CFI check for this will fail.
CRs-Fixed: 2807933
Change-Id: I4e72cf07de701bbfd8f7d7829207256918beeb4c
Signed-off-by: Jigar Agrawal <jigar@codeaurora.org>
In the case of workqueue congestion move the skip frame logs to
rate info limit.
CRs-Fixed: 2800932
Change-Id: I96988ff73ae182d55eb3f3d15de9b02f13c34b39
Signed-off-by: Wyes Karny <wkarny@codeaurora.org>
The iommu domain we grab from iommu_get_domain_for_dev can
be NULL. Eventually we will hit a NULL dereference in the
cam_smmu_alloc_firmware due to the missing check. Modify the
existing check to account for the possiblity of a NULL
domain and bail early.
CRs-Fixed: 2804766
Change-Id: I201260c3559b847cfb0bf7f85226816af148671d
Signed-off-by: Fernando Pacheco <fpacheco@codeaurora.org>
Add traces before starting jpeg encode and once done irq is
generated from hw.
CRs-Fixed: 2789495
Change-Id: I02da722ed9ba0b7f4450536e35d298b8757c0655
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
cpas dump may be called from tasklets where sleep is
not allowed. Remove calling clk get rate APIs which
will internally have mutexes which can sleep.
CRs-Fixed: 2797701
Change-Id: Ia46238c26e4f39978f58643716a43fbdb60e8ae6
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
Use OT limit as 16 for jpeg niu path. This help in
controlling jpeg bw flow and to avoid any backpressure
on IFE paths.
CRs-Fixed: 2789495
Change-Id: I458fa076f59915a7c11be9e7c3d78b412c5c7c5a
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
This change adds support for Waipio bus hardware. It also
changes the bus private structure to be pointer based so
that most of the information is filled from hardware
specific headers.
CRs-Fixed: 2794540
Change-Id: Ie9d30442246a896f372512b62bd54be32c4921ad
Signed-off-by: Venkat Chinta <vchinta@codeaurora.org>
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Add UAPI definitions for output resources of new VFE hardware.
Add changes to get the max output resource value based on
hardware version, at the time of probe.
CRs-Fixed: 2794540
Change-Id: I5f11be0546012c5f806153c2fd6b0aeb993f5d93
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
there should be a race condition on rd_done
read/write between cam_cci_irq and
cam_cci_read_bytes, add mutex to avoid.
CRs-Fixed: 2786609
Change-Id: Ic55976133bfdc7958b4b3c8b0efdf896f82e7ccf
Signed-off-by: chengxue <chengxue@codeaurora.org>
Whenever there are NRT request then bump-up ipe clock
to max. Clock will get reduced as part of context timer expires.
CRs-Fixed: 2793751
Change-Id: I28a0b32bd52b58e293439042008711ea454a64f3
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
Clients like cpas scale some clocks like slow_ahb, fast_ahb
through vote level based on other hw's src clk freq while
the actual src clock (camnoc) is calculated and set directly
through set_src_clk API. This will overwrite freq of camnoc_axi
with the same level as AHB when ahb clocks are set. Do not
set src clk rate while setting rate for other clocks using level.
CRs-Fixed: 2793673
Change-Id: I5538a5cebf4e47c407a2bf9778136500b1162b4a
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
