As part of Dynamic mode change feature, rxdma_mon_status_ring
has been moved from dp_pdev to dp_psoc. Adapt CFR to this change.
Dynamic mode change feature change -
Ib017d49243405b62fc34099c01a2b898b25341d0
Change-Id: I43ee4e08ad70614d042be3e08c0add66e7e011f9
CRs-Fixed: 2606001
Update the diag log codes for below excluding the LOG_1X_BASE_C
offset, as its added explicitly:
LOG_WLAN_AUTH_ASSOC_TX_RX_INFO_C
LOG_WLAN_ROAM_TRIGGER_INFO_C
LOG_WLAN_ROAM_SCAN_INFO_C
LOG_WLAN_ROAM_RESULT_INFO_C
LOG_WLAN_RRM_TX_RX_INFO_C
Change-Id: I7f4918542760b518a9ea5ffa90ca554a5c9c5c8a
CRs-Fixed: 2599120
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
Also remove the ops which are used to store
and retrieve such handles, that no more needed.
- register_peer
- clear_peer
- change_peer_state
- peer_get_ref_by_addr
- peer_release_ref
- peer_state_update
- get_vdev_by_sta_id
- register_ocb_peer
- get_peer_state
- get_vdev_for_peer
- update_ibss_add_peer_num_of_vdev
- remove_peers_for_vdev
- remove_peers_for_vdev_no_lock
- copy_mac_addr_raw
- add_last_real_peer
- is_vdev_restore_last_peer
- update_last_real_peer
- peer_detach_force_delete
Change-Id: I4a41211464a30e018e8b73b8e9b91c7a509327b4
CRs-Fixed: 2541711
Scan can cause issues in video streaming when miracast session
is active.
Reduce the scan time by removing the DFS channels
from scan list during the active miracast session.
Change-Id: I14666ebccabaf373a67f396fb7f85c2f7ee34449
CRs-Fixed: 2603528
Define shadow register value as 0 in else case where none
of the chips supporting SHADOW configuration are enabled. This
is needed for low memory configuration profiles where
QCN9000 and QCA6290 are undefined.
Change-Id: I6281568e830b506707aeb96d3ea03811cc1de8a7
Define a QDF API to check if driver unload is in progress such that
driver unload can be checked from CMN components.
Change-Id: I397b0b6252ed8fd9558f04802cf55fdc61a39d83
CRs-Fixed: 2605656
If the vdev is marked as delete in progress, then the
packets received on that particular vdev should not be
submitted to the network stack.
Drop the packets if the vdev is marked to be deleted.
CRs-Fixed: 2599128
Change-Id: I0996669bea368b6c0afc10e1d929bc2f314ae6fe
Peer id field is set to HTT_INVALID_PEER when failed to
populate cdp rx indication structure.Set num_user to 0 in
such cases.This avoids out of bound access during rx stats
update.
Change-Id: I112713deee1ec3cb9c37ba3571aff05fb816c76d
CRs-Fixed: 2596779
Modularise the logic of FFT bin length adjustment SWARs and
Spectral FFT report logging logic.
Change-Id: Ia1382e3bdd78589c5192263d23e31bc74e2bfbbd
CRs-Fixed: 2599080
Clear console log boot up error prints by removing unnecessary
prints, modifying prints to appropriate info or debug and
by fixing the errors
Change-Id: Ica3f126280399eef59b894236849e2079a62565f
CRs-Fixed: 2597026
Add support to fallback the PMKID generation from firmware to
wpa_supplicant.
Firmware fallbacks PMKID generation to host when FIPS enabled
due to the crypto library availability limitation.
Once the roam candidate selection is done in the firmware, it
sends the WMI_ROAM_PMKID_REQUEST_EVENTID. Once this event is
received, the host driver triggers an event to wpa_supplicant
for PMKID generation.
Change-Id: Ica00d27ce3f9f4a8f966261b38e238c389fcf05c
CRs-Fixed: 2507617
Currently cdp ops are given pdev/vdev handle
as its arguments, which is directly accessed
in those APIs. This can cause a race-condition
in access of the respective handles if it has
been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id/vdev_id which will be used to get the
respective handles, and hence avoiding unwanted
access of the handles if it has been deleted.
Also deleting few ops which stores and retrieves
such handles and adding ops to set/get pdev params.
- txrx_get_psoc_param
- wdi_event_sub
- wdi_event_unsub
Change-Id: Id089d9b6b4737d700d2436e2081291a3741affb5
CRs-Fixed: 2541658
Change set 2 of ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: I3f180c9c360d564f0b229b447074ad23b7c0a737
Add new parameters for converging multiple set/get
APIs into common psoc/pdev/vdev/peer set/get APIs.
Change-Id: I0802dea028c9e935ef899169cf7d86f2dc7632bc
Change set 1 of the ctrl_ops APIs to replace pdev, vdev and peer
dp handles with pdev_id, vdev_id and peer mac address
along with dp soc handle
Change-Id: Iedf6dea2215d3d04b2212c71c8ec8c7328c559e8
Starting Kernel 4.19 IPA LAN RX supports NAPI polling
mechanism. Netdevs that hook into IPA need to call
netif_receive_skb() or similar to deliver the packet
to network stack instead of using netif_rx_ni().
IPA driver exports ipa_get_lan_rx_napi(void) API for
this purpose. If this API call returns true use
netif_receive_skb() or fallback on legacy api.
Add the changes under a feature flag IPA_LAN_RX_NAPI_SUPPORT
which is enabled under a linux kernel version check for 4.19
and above.
Change-Id: I449404e86e934fd6113cb71e494575e67602f678
CRs-Fixed: 2588500
Avoid direct fw headers usage in init_deinit component since
can have functional impacts. The inclusion is done at wmi level
to fix the inconsistency of code.
Change-Id: I73cc1aac500cec041de81750b9c7654d21344e6c
CRs-Fixed: 2505399
Add WMI support for broadcast twt sta invitation and
sta kickoff. Additionally, update the current WMI twt
fields to include btwt recommendation and btwt persistence.
Change-Id: I88dee854557bbb8c3263f42041e0b90a07cdd27e
Since delete in progress for peer is set in roaming cases
explicitly, do not return from peer teardown after checking
this flag.
Change-Id: Icc514d9500075409d907546a26b2725b5334cbce
Change enable_runtime_pm from bool to uint8_t in correspondence to
changing CFG_INI_BOOL to CFG_INI_UINT for enabling runtime PM.
Change-Id: Ib5031ada43fac864d933cdfee875593f896b2a62
CRs-Fixed: 2603918
Currently, if the country code which is going to be set is the
same as the country currently being used, it will be ignored.
It does not consider its country code source. This causes the
working of 11d logic unexpected.
To fix this issue, check the country source when trying to set
the same country code.
CRs-Fixed: 2583172
Change-Id: I9c574a62d11676bc0305510f1da9848cc044f874
For Genoa, the WLAN FW enables IPA by default, if the
IPA is disabled by kernel config, the IPA status is
not same between wlanhost driver and WLAN FW. So add
such info in the first WMI command to let WLAN FW knows
the IPA state from host, and do the according copy engine
initialization, otherwise, the mismatch IPA copy engine
configuration will casue the Genoa FW assert.
Change-Id: Iec2f86ffb40b296c51bee41adc0d895beb200e5c
Add the datapath changes for supporting
the newly added IPCI bus type for QCA6750
CRs-Fixed: 2597326
Change-Id: I27e3e9f746eb383e85c7345150bda03320d041b9
Currently host writes to TX doorbell register after ipa connect
pipes to indicate number of free TX buffers. In case when IPA
clocks are off and host tries to access the register will leads
to invalid access. So access the tx doorbell register after ipa
enable pipes which makes sure IPA clocks are always on.
Change-Id: If11fdc9c408ebf7f22eef6a020b507bc39ee6a8e
CRs-Fixed: 2599029
In scm_add_rnr_channel_db, if pointer channel is NULL, it should return.
Allocate rnr_node buffer whenever it is used, otherwise memory leak
happens if the BSS channel is not 6Ghz.
Change-Id: Iecba2453c2e9cdf9301826e0e11f740190616110
CRs-Fixed: 2601014
CSA channel switch call directly interacts with VDEV
state machine, move CSA restart to go through serialization
service.
CRs-Fixed: 2598123
Change-Id: Ic0bea64b56f54eed354e11d0873ae4423e365cca
multipass_rx_pkt_drop is peer level stats counter
used to count multipass rx packet dropped frame.
Accumulate this counter at vdev and pdev level.
It also initializes multipass_en flag to false at
vdev attach.
Change-Id: Idaa85a71c80eefb9359abb026402b71aa28ad6a2
CRs-Fixed: 2595551
Move process_sw_event API to pktlog_wifi2.c file as
it is only applicable to legacy product line.
Change-Id: I8eee102ea2eb70c0ffcec4ac20dfdf6ef48bca5b
CRs-Fixed: 2585613
Move pktlog_rate_find API to pktlog_wifi2.c as they are
only needed for legacy product lines.
Change-Id: I2a232e283cf5bf151ce84ba77f4359f25b60a5ac
CRs-Fixed: 2585613
Move process_rx_info to pktlog_wifi2.c file as it
is only applicable to legacy products.
Change-Id: I2a758c26ac560459f22fbb691863bf1fea17cf65
CRs-Fixed: 2585613
Move process_tx_info from pktlog_internal.c to pktlog_wifi2.c
as they are only needed for legacy product line.
Change-Id: I53b90deaf86aa2bb6533b9957879e7860d91b352
CRs-Fixed: 2585613
Move pktlog hardware dependent API's from pktlog_internal.c
to pktlog_wifi3.c as they are hardware dependent.
Change-Id: I421b3116a35e735a51c82839005bbc2d4cb138d7
CRs-Fixed: 2585613
Force wake request is sent before register write. If this req
fails check if FW is down or host is in recovery before
asserting.
Change-Id: I6d31b1f95b68ae4e462f59ed32ed933de55cacae
CRs-Fixed: 2601364
SAP not advertising 20TU probe response when
FILS Discovery is disbaled through ini.
Updated WMI fields to enable 20TU probe response
when 6Ghz SAP is operating.
Change-Id: Idc4b95047d2149f68a68a434afda4d325a5d0547
CRs-Fixed: 2600485
Add TGT_IF change to support consolidated multi vdev restart
response handling.
Change-Id: I8d507dda8f39d36102a7aa7a7baf425335097047
CRs-Fixed: 2595769
Add WMI change to support extraction of consolidated multi vdev
response handling from TLV.
Change-Id: Ida4c346870c99cf5df17b664c4233963585e36cd
CRs-Fixed: 2600388
1. Move all LMAC rings to SOC from pDEV
2. Dynamically obtain lmac->pdev mapping while handling LMAC interrupts
Change-Id: Ib017d49243405b62fc34099c01a2b898b25341d0
