rpm_msgs address is calculated from memory allocated during write_batch.
Correct the offset from where rpm_msgs actually starts and assign req
pointer to point to correct address.
Also add list_del before freeing memory in invalidate_batch.
Change-Id: Idca43fe73bd238e90911158b08b3889c001e1123
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Currently rpmh dirty flag is set for all cases regardless of
data is really updated or not. Correct it to update for
only those cases where data is updated.
Change-Id: I2c87ffbf1bae23ddd4b4cb7dced213cac267df59
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Currently adreno_snapshot() tries to dump remaining IB1 size
if the active IB1 base address is not present in ringbuffer
which is not enough to debug GPU hang.
So, try to calculate the maximum possible size that it can
dump from IB1 base address and add it to snapshot dump.
Change-Id: I029fb8cddab7999001a2934ce49cb5ff884c21bf
Signed-off-by: Rajesh Kemisetti <rajeshk@codeaurora.org>
Add support for DIAG and DCI MHI clients moving to userspace.
Change-Id: I2ee30fedfb50644f7bcc7eac41d08e37ca71805a
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Add debug node to control power collapse on/off and timeout value.
Remove unused traces that caused linker error due to this change.
Change-Id: I7860cda4e2febee85a54884f9e26ae7a512afbb2
Signed-off-by: George Shen <sqiao@codeaurora.org>
In root complex mode, PCIe needs to enable BDF to SID
translation so that device generates the correct SID.
Therefore, always enable BDF to SID translation when setting
up other BDF to SID configuration.
Change-Id: Ied960384e14cb4069bba46bb7b750d8d34949cec
Signed-off-by: Tony Truong <truong@codeaurora.org>
Detect if the process is privileged by comparing its group ID with
an internal list obtained from the device-tree. Update the process
attributes sent to the remote subsystem accordingly.
Change-Id: I8d7b6824762b934ca6bd9a5d2420dc0dd49b7e6d
Acked-by: Thyagarajan Venkatanarayanan <venkatan@qti.qualcomm.com>
Signed-off-by: Edgar Flores <edgarf@codeaurora.org>
Correct number of arguments are not passed to the dev_dbg
call here. This is leading to access of garbage value.
Fix this by removing the extra format specifier in the
string.
Change-Id: Id64a00c1ca44c5ee2014fd806c234f702a7941f6
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Improve readability of logs by converting hex values to decimal,
and printing memstall deltas instead of absolute values.
Change-Id: I43f21dd9817b540184ce05fd7151459d3502ea28
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Print the threshold registered for a trigger in decimal, which is
more readable.
Change-Id: Ia10bd233845446be62a4ea9d2232ff1ba638c50e
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Use proper accessor for high watermark access.
Change-Id: I381bc58455c55c33ebaf2e87dc5ad79131f2f5b5
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Separate header buffer and non-ion copy buffers allocation
to avoid virtual address over allocation and
some improvement in latency with non-ion buffers.
Change-Id: I9f5e3bbb974dc7b1db92e386b980fd2d8b4f08aa
Acked-by: Deepika Singh <dsi@qti.qualcomm.com>
Signed-off-by: Merugu Tharun Kumar <mtharu@codeaurora.org>
When a new cgroup is created, the effective uclamp value wasn't updated
with a call to cpu_util_update_eff() that looks at the hierarchy and
update to the most restrictive values.
Fix it by ensuring to call cpu_util_update_eff() when a new cgroup
becomes online.
Without this change, the newly created cgroup uses the default
root_task_group uclamp values, which is 1024 for both uclamp_{min, max},
which will cause the rq to to be clamped to max, hence cause the
system to run at max frequency.
The problem was observed on Ubuntu server and was reproduced on Debian
and Buildroot rootfs.
By default, Ubuntu and Debian create a cpu controller cgroup hierarchy
and add all tasks to it - which creates enough noise to keep the rq
uclamp value at max most of the time. Imitating this behavior makes the
problem visible in Buildroot too which otherwise looks fine since it's a
minimal userspace.
Change-Id: Id2500fe901759d7251eff241ec09ecdee812f6ef
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Fixes: 0b60ba2dd3 ("sched/uclamp: Propagate parent clamps")
Link: https://lore.kernel.org/lkml/000701d5b965$361b6c60$a2524520$@net/
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Git-commit: 7226017ad37a888915628e59a84a2d1e57b40707
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Add debugfs parameters to configure different settings per haptics
effect which is useful for testing.
Change-Id: Iace6dab1ca11cad20d5b44eaf81e704053bc3e0b
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
Add DT definitions for a few properties that are used to specify
haptics hardware configuration and vibration effect settings.
Change-Id: Icd9da49e87eca9c865e7f6add5638842c20a3bd6
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
QTI HV (High Voltage) haptics is a module which can play haptics
effects for LRA or ERM with drive voltage up to 10 V. It has
several pattern sources built inside and each pattern source can
be used for playing different vibration effects.
Add the driver to support QTI HV haptics module, which will be
registered as an input FF device and can be controlled by calling
read/write/ ioctl APIs on the input device node.
Change-Id: I8323bdf3f7a631570604577719d5b7876fc65ef1
Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org>
