Add device tree changes for memory, regulators,
clock and interrupt information for CCI, CSIPHY,
CPAS, LX7, CDM, TPG, VFE, CSID, IPE, BPS, JPEG,
VFE-LITE and CSID-LITE nodes. Update SMMU Node.
Add new SFE Nodes. Updated cdp and mtp dtsi files.
Update to move camera pinctrl to sensor cdp and mtp files.
CRs-Fixed: 2784041
Change-Id: I015a17dcea5ba82e8048138ead93281ec69ef5f5
Change rear main camera's AVDD from 2800000 to 2880000 on Holi
QRD only in order to decrease AVDD noise.
CRs-Fixed: 2774064
External Impact: No.
Change-Id: Ia2d9b98bbfe1439920ac69dd227b70a6815381f6
tfe csid node does not need to have cphy clock values.
csid node need to set only default clock. Required clock value
will be set by the phy driver.
CRs-Fixed: 2796075
Change-Id: Ide1b2b2e0e124357ed20589e0f2bb0431b579009
Add rpmh bcm register space mapping to help read bcm
status registers whenever IFE overflow happens. This
helps in getting ddr, mnoc clock frequencies along
with other camcc clock frequencies to understand
the overflow scenario.
CRs-Fixed: 2787956
Change-Id: Ic6ae399a7000974d6f6e33197dc287707a4f2c2e
- Update the cphy_rx_clk LOWSVS corner values (from 320MHz
to 266.67MHz) in the CSIPHY DT nodes for shima.
- Zero out the rx_clk values in the CSID nodes to ensure
the clk is only set by PHY.
CRs-Fixed: 2792275
Change-Id: Ic39c0123bb04b5b7e449f95823303ca026fa81be
For adding more information for cam_hw_fuse refactor
existing entries. Also add support for mp limit fuse.
CRs-Fixed: 2785460
Change-Id: I116adfd57663be967ed5cc55237cc0e971b226bd
The tpg node is added with mandatory parameters
to holi device tree to be probed as different
camera ID.
CRs-Fixed: 2789855
External Impact: No
Change-Id: I52e9f400612c84c18b28d7396e78c03dd457a628
Update the binding for IFE, CSID, CDM, TPG, CSIPHY,
ICP, CCI for Waipio. Also, add bindings for SFE for waipio.
CRs-fixed: 2784041
Change-Id: Ia20dd4c458385edb446ba12b160b9577faa1c619
Each tfe hardware instance has unique pid values. Add pid
values to each tfe node instance. These are used to find
the tfe instance that caused page fault. Added pid values
to all tfe based targets.
CRs-Fixed: 2775154
Change-Id: I16b5253bd02c499899ca3c1c2d2e1a24bf62845d
Add TFE2 node in CAMNOC graph to consider BW voting done on TFE2
CPAS client. In the absence on this node, BW vote for TFE2 will be
ignored by CPAS driver.
CRs-Fixed: 2771589
Change-Id: Ie07677f4acbe0499307371ed16bb0cbf60247f57
Add GCC throttle clock for real time(RT) and non real
time(NRT) client for Shima target. We need to control
explicitly GCC throttle clock for shima.
CRs-Fixed: 2770220
Change-Id: If414039847ffd91fd0a2022e4a4c6fe213f2647f
Property 'label' is a reserved property of type string. Present
device trees use the property as list of strings.
Rename the property to 'cam-smmu-label' to resolve conflict.
CRs-Fixed: 2729703
Change-Id: Iabfe66482014097b46d136cdde622cd1d246b446
Add dualife in the CPAS-CDM client list to use the
CPAS-CDM for dual IFE usecase.
Add csiphy and cci clients to cpas for shima.
CRs-Fixed: 2732941
Change-Id: I2e236b465e8fb9d5624db3950f1b1b5ad5a373ff
Add support to discard a specified address space region inside
the full dma map region for shima target.
CRs-Fixed: 2732941
Change-Id: I7ec78c2842b16396cfe1632e7b09d7cdd84bd8bb
Add rpmh bcm register space mapping to help read bcm
status registers whenever IFE overflow happens. This
helps in getting ddr, mnoc clock frequencies along
with other camcc clock frequencies to understand
the overflow scenario.
CRs-Fixed: 2754299
Change-Id: I9b066684fc3083168f90e2883cf2e90db589828e
Control camcc fast_ahb clock rate through cpas driver. This
helps in consolidating the ahb requests from each client
and then vote max of all current requests. This change helps
in avoiding each client controlling correspnding branch clk
frequency on their own and thus changing the frequency without
knowing other client's requirements.
CRs-Fixed: 2759585
Change-Id: Ib22df29df36a0309a1e9fb58286162bcede2046c
-Regulator framework for pm8008 accepts only the voltages to be in
multiple of 8mv , So this change rounds of the vdig supply in s5k3p9
and imx476 to 1.056 instead of 1.05
-Fixed typo in camera-device tree file.
CRs-Fixed: 2733427
Change-Id: If801b781d08f4ab2bbfa4d866585c2ef99d2c2ac
Add support for nominal clock cntl level for CSIPHY to
camera devicetree for holi camera.
CRs-Fixed: 2733427
Change-Id: I59b28dbb75f5b7bb0e6e7b693ccec4b010ebe9df
