According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To satisfy kernel 5.4 requirement add policy to following vendor
command as part of this change:
QCA_NL80211_VENDOR_SUBCMD_ACTIVE_TOS
Change-Id: I915ec5494ef16e7cc5b8c42d814c512a925ef469
CRs-Fixed: 2634120
According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To satisfy kernel 5.4 requirement add policy to following vendor
command as part of this change:
QCA_NL80211_VENDOR_SUBCMD_FETCH_BSS_TRANSITION_STATUS
Change-Id: I7c49d959e7c5d232572aae78616b18cee875cbb1
CRs-Fixed: 2632084
According to new changes in kernel 5.4 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To satisfy kernel 5.4 requirement add policy to following vendor
command as part of this change:
QCA_NL80211_VENDOR_SUBCMD_NUD_STATS_SET
Change-Id: I1023872146d398252cd8dbde8431cd8c5e839a31
CRs-Fixed: 2631294
In function rrm_fill_beacon_ies, do while loop is checked
for BcnNumIes if it is greater than IE length 0. Fix the
check to be greater than 2 as the first two bytes is IE
header(element ID and IE length fields both 1 byte each.)
Change-Id: I11e5de481cd49a22acafee938fbe73f839f5b0e4
CRs-Fixed: 2626729
Remove the excess error log in hdd_rx_deliver_to_stack. The hdd
rx/tx stats are incremented in caller for success and failed
cases for delivering the skb to network stack. This error log
is redundtant as stats for rx packets refused is incremented
when packets are dropped by the network stack.
Change-Id: I5a774db18966f9b43721278daef936de7524d6f7
CRs-Fixed: 2633475
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To satisfy kernel 5.2 requirement add policy to following vendor
command as part of this change:
QCA_NL80211_VENDOR_SUBCMD_THERMAL_CMD
Change-Id: Ia5a5e62b3fe086c3fab58d92d12898f525f774b8
CRs-Fixed: 2631242
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To satisfy kernel 5.2 requirement, add policy to following vendor
command as part of this change:
QCA_NL80211_VENDOR_SUBCMD_ENCRYPTION_TEST
Change-Id: I37836165dc8ff89f7179d5024cc3b1516cacf6e6
CRs-Fixed: 2633303
The function hdd_softap_deregister_sta takes the sta_info as the
argument and calls hdd_sta_info_detach. In hdd_sta_info_detach, the
memory assigned to the sta_info is being freed. For this memory to be
properly freed and set to NULL, the actual memory location must be
passed to the function; which is currently not happening.
Pass the actual memory location by reference using a double pointer so
that the memory cleanup is proper.
Change-Id: If0f846957df0378ea7a13b76bdf9c6ef562ed90e
CRs-Fixed: 2627296
Currently the ssid received in the beacon report request is not
printed when beacon report is received from AP in the kmsg.
Fix to print the SSID if its present in the beacon report
request.
Change-Id: Ide4659e955dec756f60b0508eb3be529c43601b3
CRs-Fixed: 2632653
Glitches seen after the STA disconnection because of the roam scan
triggered on a heartbeat failure ( beacon miss ).STA does a partial
scan followed by full scan causing the DUT to go off-channel from
the STA and P2P home channel, causing the music BLIP.
Fix is to disable roaming irrespective of data traffic present
or not on P2P interface and enabled again once P2P is disconnected.
Change-Id: I5ddf946adbfbe99d5b20c23c46b2b4ac0bfac47f
CRs-Fixed: 2632939
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To satisfy kernel 5.2 requirement add policy to following vendor
command as part of this change:
QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG
Change-Id: Id83ee15ec7eb43103e44505f44fb9ff48cb23f74
CRs-Fixed: 2634109
In SAP mode, as part of dhcp inspection, sta info is fetched
using the source address of the packet irrespective of
direction. This results in sta info fetch failure in case
of dhcp tx frames where source address is self mac address
which is not registered as part of SAP start. Due to this,
when sending dhcp ack frame, tx comp flag is not set in nbuf
cb causing dhcp stop ind to be not sent to firmware.
Fix is to use dhcp client mac address to fetch sta info.
Change-Id: Ia61b93d24f3d069b40fe8ffa5ee7b6ba1e30e7c5
CRs-Fixed: 2632275
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To satisfy kernel 5.2 requirement add policy to following vendor
command as part of this change:
QCA_NL80211_VENDOR_SUBCMD_COEX_CONFIG
Change-Id: I865ec470e1b24d1e4c5094648435ea7020a01af8
CRs-Fixed: 2634095
According to new changes in kernel 5.2 version onwards, driver has to
provide the policy for a NL command to be verified against while
registering wiphy to the kernel.
To satisfy kernel 5.2 requirement add policy to following vendor
command as part of this change:
QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION
Change-Id: I91a97a17fa27f93f20385a250f098d5b01081023
CRs-Fixed: 2634072
In WEP SAP mode, the ping between SAP and client is failed
because in the SAP side the firmware has no unicast key
for peer mac address. The default address in key context is
SAP bssid.
Update the peer mac address before set key to firmware for
the WEP peer.
Change-Id: Ia5ba4612d0cc0f9900c72baf1c37bd278b526389
CRs-Fixed: 2599289
11K test bed sends beacon report request for channel 48 with
invalid reg class 0 to DUT. So, driver gets chan_freq 0 by API
wlan_reg_chan_opclass_to_freq because of reg class 0.
To get correct channel freq for beacon report request, use new
API wlan_reg_country_chan_opclass_to_freq to
get freq from country operating class table firstly by (opclass,
channel number) pair. When the lookup is failed, the API will
try to look up by chan number only.
Change-Id: I5b56804c20d6fade17b2acaa0f7c261feebd6370
CRs-Fixed: 2603989
Excluding few Helium based targets from SMMU S1
feature enablement which are not having the
Kernel support for SMMU S1.
Change-Id: I46c17749150f00113137c546d7e14964860aa2e3
CRs-Fixed: 2633675
Currently no stats were printed related to ARP and DNS frames at STA
after initial association or after roaming complete.
To print these logs, add INI configuration and a periodic timer to
print ARP and DNS stats after initial association or after roaming
complete. This is an optional feature controlled by
'WLAN_FEATURE_PERIODIC_STA_STATS' flag.
Change-Id: I373632cc35584728c5b556bb28eda1077d51fd9b
CRs-Fixed: 2619383
Currently in net dev cleanup of ipa host interface if the
ipa interface does not exist for that particular net dev,
last ipa iface reference is passed. This may lead to invalid
access. So fix by validating the iface context before clean
up of host ipa interface.
Change-Id: I753c922b5c82c676a318df87552051fdd74c983c
CRs-Fixed: 2632382
User get BSS stats for the command response of GETBSSINFO. Driver saves
BSS info of the connected AP in HDD's station context. For every
association completion, driver updates BSS info stats.
In LFR3 roaming, Roam sync state in the CSR layer is set to 1 if STA
associates with new AP because of roaming. Thus for LFR3 roaming, driver
uses roam sync state to update roam count while processing association
completion.
Change-Id: Ia75f4c7b049a0546b2922d890cb3c12f6f4513a2
CRs-Fixed: 2632421
