While performing MIC header check for MPDU fragmented packets
host is expecting last fragment will hold full 8bytes of MIC header,
but this is not true in case of MPDU level fragmentation since
MIC header is part of payload it can split across last two fragments.
Fix this logic by extracting MIC header from last two fragments in case
last fragment doesn't have full 8 bytes of MIC header.
Change-Id: I41aaa35d9a18ac0222ab55be6822f9c9d7f15982
CRs-Fixed: 2790661
Currently host does not convert all internal auth types
to qca auth types which results in invalid auth type
indication for big data logging even for some of the
valid auth types.
For example in current scenario connection hapens in SAE
auth type but driver indicates invalid AKM type.
To address above issue add missing auth type and send
proper auth type to user space as part of the big data
logging.
Change-Id: I2612a081385c2bc888afb032cf6fd2a44d886e40
CRs-Fixed: 2803348
In dp_mon_status_srng_drop_for_mac, the rx_desc pool
used for status ring is dest ring desc pool which is
not the appropriate one.
Fix is to use the appropriate desc pool for mon status
ring.
Change-Id: I6f178354789212b375a7a541366bef590a925568
CRs-Fixed: 2800658
TSO packet segments are enqueued to the HW individually.
The skb users count is incremented for each additional
segment, so that it is freed only when the TX completion
for the last segment is received.
Currently the skb users is incremented for the additional
TSO segments after the previous segment has been enqueued
to the HW. Due to this, there is a chance for the tx
completion for the first TSO segment to be received even
before the skb users is incremented to account for the
remaining TSO segments, thereby leading to use-after-free
scenarios.
Fix this by incrementing the skb users for additional
TSO segment before enqueueing the previous TSO segment
to the HW.
Change-Id: Idebc28719ba6f0223d5454e15c3cde349803816e
CRs-Fixed: 2801777
Add the reo destination indication value in
the FISA flow table. The reo destination
indication will be saved for every flow.
Change-Id: I58782cc7be7dd686dc9e0f5837e6bbe406cc1514
CRs-Fixed: 2803079
In monitor mode, as part of VDEV delete, monitor mode
poll timer is stopped; it is good to reap the monitor rings
once after timer stop to avoid crashes that arise due to
RXDMA2SW ring backpressure.
Change-Id: Ib15b3398087073ad053616c6aa68e295eaebdd17
CRs-Fixed: 2796608
Add apis to map generic registers to shadow region. Existing
logic includes mapping only srng based regs to the shadow
region.
Add support to map REO control regs and WBM2SW2 rel
ring HP reg address to the shadow region in case the direct
reg writes in IPA enable/disable autonomy fail due to UMAC
block being in a power collapsed state.
Shadow reg mapping for these regs is provided to FW during
init. Add stat shadow_reg_write_fail to track shadow reg
write failure and shadow_reg_write_succ to track successful
shadow writes.
Change-Id: I04790765a3de80047689657e2cad0b73123440b9
CRs-Fixed: 2790321
Add log limit to error "DMA not done" when reaping Monitor status ring
to avoid flooding other useful driver log.
Change-Id: I251ef8082d49bfdbcc6a234224cbefdba608b5f5
CRs-Fixed: 2798732
Rate limit log in reg_get_chan_enum_for_freq() API
to prevent excessive logging.
Change-Id: I52248877b5741f1f6a459b3f5240cabafbf1af05
CRs-Fixed: 2798752
In monitor mode, if channel is initially configured from 5G
band and then moved to channel from 2G band, packets are still
received on MAC-0 RXDMA2SW ring since IMPS is disabled for both
MACs. Since driver reaps only MAC-1 RXDMA2SW ring, ring full
condition is hit for the MAC-0 ring causing ring backpressure.
Fix is to drop packets received on the non-monitoring MAC
ring.
Change-Id: I49cb276827f4a06791183ee3fe8c88ba84df085d
CRs-Fixed: 2791341
log level for some frequent prints is set to info those
logs would be present in dmesg as well as driver logs
and System performance may get affected due to excessive
logging.
Avoid redundant logs which may affect system performance
and change default log level to debug.
Change-Id: Ic8669c2d7158200e5881bc1ffd15079c8d24af68
CRs-Fixed: 2794518
Handle case in mon dest ring buffer processing,
where one MPDU can have more than QDF_NBUF_MAX_FRAGS MSDU.
Change-Id: If09099814b7f701efbaa20b1406958ad97d64829
CRs-Fixed: 2788919
For QMI events, recevid QMI event length is used to allocate wmi buffer
using wmi_buf_alloc. The received QMI event length includes WMI head
room and wmi_buf_alloc also try to reserve WMI head room again.
Because of this, WMI buffer allocation is exceeding max WMI msg length.
To resolve this, use length of the received actual WMI msg to allocate
WMI event buffer using wmi_buf_alloc.
Change-Id: Icd259988c4b1091580a35aaf2c3fabc606e0f2a9
CRs-Fixed: 2786326
Add API to do IPA Tx buf SMMU-S1 unmapping and register it
with cdp ops for Hastings, also assert if map/unmap failed.
Change-Id: I4071b5fccd84c3c97b9dccc40c6f798d70993189
CRs-Fixed: 2792170
Many firmware do not send wmi_ext_service bitmap in wmi_ready event
so the ext_service_bitmap will be empty in such cases. So the condition
in the is_service_enabled_tlv to check for wmi_ext_service bitmap
and return false is wrong as wmi_ext_service bitmap support is not
necessity. This condition leads to incorrect behavior in cases when
firmware do not support wmi_ext_service bitmap as is_service_enabled_tlv
returns false for every service.
Fix the above failure by addition of condition check for wmi_ext_service
bitmap only when wmi_ext2_service bitmap is supported by firmware.
Change-Id: I94d0b65e640d44f41d14de889955a6d6330e88b2
CRs-Fixed: 2786491
A htt message arrived after ipa context is freed as part of
deinitialization which was dereferenced by event handler
assigned to pdev->ipa_uc_op_cb, resulting in crash.
To fix this, during deinit pdev->ipa_uc_op_cb is deregistered
and assigned NULL before freeing up ipa context.
Change-Id: I8125cb104a538e88cda93960f7443129fabd850a
CRs-Fixed: 2793295
As part of removing gOclCfg ini, remove code used for it that is
no longer needed.
Change-Id: I00c32988cb3b852381be9810377aeefdd22454db
CRs-Fixed: 2791469
HTC runtime count is incremented after posting the HTT
ver req message to CE4. There could be possibility of
processing the ver response message from FW even before
htc_runtime_cnt is incremented. This can casue RTPM put
to not happen causing imbalance in get/put count.
Fix is to increment htc_runtime_cnt before enqueuing
the HTT message to CE.
Change-Id: Ib9b69910cd14193c41ecfee804b390f8a6cdef49
CRs-Fixed: 2794451
Add WMI command buffer address information(DMA/Physical addr) to
the WMI TX completion logging. This will help in debugging issues
when HW DMAs copies data from a different location than the one
configured.
Change-Id: I60586b865a97e7ff88e48606806ec151321ff0aa
CRs-Fixed: 2789492
Send unified ll_stats and get_stats request over qmi based on INI
configuration.
Change-Id: Icc43352c1ba19696148619100ee27fda4d5ffb41
CRs-Fixed: 2791043
Host gets spectral scan data after stopped spectral scan, then it
can't find out current vdev since vdev id is reset when stopping
spectral scan.
Change-Id: I082b784e998a7600c7f8ef14bf67b790942f3a5f
CRs-Fixed: 2779397
Add hal_rx_msdu_get_reo_destination_indication API for QCA6750
target. Add NULL check to avoid possible null pointer dereference
for targets API is not supported.
Change-Id: I2c78e16a6796b0b09834cb91749244357f3de753
CRs-Fixed: 2793284
Currently, there is no provision for dynamic dwell time control in 6G.
Update existing driver commands SETDWELLTIME and GETDWELLTIME to
support 6G.
Change-Id: Id284097e300f3ed45557ebe7ea2287e0da9a485b
CRs-Fixed: 2789720
Introduce QCA_ATTR_ROAM_CONTROL_SCAN_SCHEME_TRIGGERS
that represents the triggers for which the scan scheme from
enum qca_roam_scan_scheme has to be applied.
Change-Id: I9d620a0ada16093042befaf8ae2e80437369c256
CRs-Fixed: 2785260
Add a new cdp datapath ops - mscs_ops for Mirrored
stream classification signalling feature. This function
will be invoked from ECM flow acceleration manager
Change-Id: I749623846395057b6ea8328c881efa8733700b0e
If frames from the same FISA flow goes into different REO2SW rings, it
will result in an unexpected FISA behavior. This can happen if the
frames have been reinjected from FW offload module since FW will select
REO2SW1 ring. If the same flow frames hash to other REO2SW rings, then
the same flow UDP frames will do to different rings.
Reo_destination_indication of 6 indicates if the frame has been
reinjected from FW. If so, then continue to deliver the packet without
FISA.
Change-Id: I14a17a10d04909adfb30557d58beb1610e59bf70
CRs-Fixed: 2790292
Non-Tx beacon generated in driver contains TX
beacon capabilities instead of capabilities
advertised as part of non-TX profile in MBSSID IE.
Copy the non-TX beacon capabilities from MBSSID IE
profile to driver generated non-TX beacon.
Change-Id: Iecf63b959176bac8d60055e6b77082a6f3ec117c
CRs-Fixed: 2789394
In teardown API update logical delete state to peer
before deleting AST entries of peer. Also in delete
AST API use __dp_peer_get_ref_by_id to get the peer
Change-Id: I6db227a284cf3726cc241ebc98386230eca58fcf
Use CM_PREFIX_FMT and CM_PREFIX_REF to print connection mgr logs
instead of CM_PREFIX_LOG to avoid confusion.
Change-Id: I06c0009804d9c49da4916a120b6dc448ea28fdb6
CRs-Fixed: 2791198
QCA6490 expects twt_ap_pdev_count 2, to bring up twt sap on 2g.
Currently twt_ap_pdev_count is derived from num of radios and is
1 in case of MCC.
Configure twt_ap_pdev_count value equal to number of phy
advertised by firmware in wmi service ready ext event, configure
under flag WLAN_TWT_AP_PDEV_COUNT_NUM_PHY if defined in kbuild
Change-Id: Ib3fa81d140b473daa253e32cde2e11aad1b78b4d
CRs-Fixed: 2786512
In structure wlan_objmgr_psoc, member wlan_active_vdevs which is an
array of size WLAN_UMAC_PSOC_MAX_VDEVS and type uint8_t is neither
populated nor used anywhere. Remove this unused member from the
structure.
Change-Id: Ib2e49e42fe986358c26fa95a9287b20297b0eccf
Currently driver can handle only one radio stats event,
if the size of radio event exceeds more than the size which
can be accommodated in single WMI event in that case FW needs
to send multiple radio stats events.
Add support in host to send WMI capability to indicate FW
that host supports the multiple radio events.
Change-Id: Ifb89419715c87959095c0c88a23c8dd650d456e7
CRs-Fixed: 2783251
Currently disconnect is not handled in connection manager,
add support to handle disconnect in connection manager.
Change-Id: If3d5ac12300527ea0162efd955521711ed52c494
CRs-Fixed: 2785950
Initialize postNOL width to CHWIDTH_INVALID instead of 0 which
is mapped to CHWIDTH_20MHZ to avoid channel changes to HT20 mode
after NOL.
Change-Id: I684f38ddb0dc76cccfede74bd6424162407b378f
This change fixes the below issue.
1. Clear the histogram statistics per peer.
2. Separate out the Tx/Rx histogram prints.
Change-Id: I5fc51f6bca14dc4c615c5501441e1a6b28bb0f02
Add support to configure REO ring threshold through ini
for WLAN_DP_PER_RING_TYPE_CONFIG feature.
Change-Id: I02a14adcf243905ab25c2af12cb9499f32ff453f
CRs-Fixed: 2789147
For HTT h2t message which has a response from FW, runtime
get is done in HTC layer and the corresponding runtime_put
is done as part of the HTT response processing. In a scenario
where the HTT response is not received from FW or not processed
by host, runtime_put is not done as part of cleanup and panic
is triggered due to get/put imbalance.
Fix is to do RTPM put as part of htc cleanup when the HTT
response from FW is not received or processed.
Change-Id: I17ccb7c3e2293c95f5f233d36c6ef38a75733cce
CRs-Fixed: 2779113
Currently for STA mode, depending on the scan_mode_6g ini value
driver will remove or add 6g channels to scan req, due to which
in some cases, scan is taking more time to complete.
Fix is to add new value to enum scan_mode_6g, when scan_mode_6g
ini value set to SCAN_MODE_6G_NO_OPERATION driver will not
modify the channel list.
Change-Id: I5b6891f142b54f4fa2fe6e9a75bf5fbd2e5f3adc
CRs-Fixed: 2783911
DA_SUPPORT macro specific code changes are removed
in DFS source code. Also, remove DA_SUPPORT macro
reference in file wlan_global_lmac_if.c
Remove the compile time flag WLAN_DFS_DIRECT_ATTACH
and related souce code.
Other DA-specific code changes are also removed.
Change-Id: Id9fdf547efd0b0332173ac1349811171e4e6acec
The firmware sends a new status code to indicate an already suspended
TWT session. Update WMI_HOST_PAUSE_TWT_STATUS status code to represent
this state.
CRs-Fixed: 2786636
Change-Id: Id1fbdde8691084e408144454214d59c8ad532f9b
Change Ic166c112189ef79a84f61d16e7e04a6334c61178 renames
few files for osif in connection manager, but does not
take care of the compilation issue after rename of the files.
Add a change to take care of the compilation errors in
connection manager module.
Change-Id: Icecb3f7aa625a65b835c15890fc019917e2b9446
CRs-Fixed: 2786828
Fix compilation error in connection manager.
Handle function name changes missed as part of
Icabeb57965920ec82e690bee662528189b081f32.
Change-Id: I6f1bc631de9dd7cc9ba7c80e01e857fe1b543782
CRs-Fixed: 2788660
